# Custom expectations

This vignette shows you how to write your own expectations. Custom expectations allow you to extend testthat to meet your own specialized testing needs, creating new `expect_*` functions that work exactly the same way as the built-ins. Custom expectations are particularly useful if you want to produce expectations tailored for domain-specific data structures, combine multiple checks into a single expectation, or create more actionable feedback when an expectation fails. You can use them within your package by putting them in a helper file, or share them with others by exporting them from your package.

In this vignette, you’ll learn about the three-part structure of expectations, how to test your custom expectations, see a few examples, and, if you’re writing a lot of expectations, learn how to reduce repeated code.

## Do you need it?

But before you read the rest of the vignette and dive into the full details of creating a 100% correct expectation, consider if you can get away with a simpler wrapper. If you’re just customising an existing expectation by changing some defaults, you’re fine:

    expect_df <- function(tbl) {
      expect_s3_class(tbl, "data.frame")
    }

If you’re combining multiple expectations, you can introduce a subtle problem. For example, take this expectation from tidytext:

    # from tidytext
    expect_nrow <- function(tbl, n) {
      expect_s3_class(tbl, "data.frame")
      expect_equal(nrow(tbl), n)
    }

If we use it in a test you can see there’s an issue:

    test_that("success", {
      expect_nrow(mtcars, 32)
    })
    #> Test passed with 2 successes 🎉.

    test_that("failure 1", {
      expect_nrow(mtcars, 30)
    })
    #> ── Failure: failure 1 ──────────────────────────────────────────────────────────
    #> Expected `nrow(tbl)` to equal `n`.
    #> Differences:
    #>   `actual`: 32.0
    #> `expected`: 30.0
    #>
    #> Backtrace:
    #>     ▆
    #>  1. └─global expect_nrow(mtcars, 30)
    #>  2.   └─testthat::expect_equal(nrow(tbl), n)
    #> Error:
    #> ! Test failed with 1 failure and 1 success.

    test_that("failure 2", {
      expect_nrow(matrix(1:5), 2)
    })
    #> ── Failure: failure 2 ──────────────────────────────────────────────────────────
    #> Expected `tbl` to be an S3 object.
    #> Actual OO type: none.
    #> Backtrace:
    #>     ▆
    #>  1. └─global expect_nrow(matrix(1:5), 2)
    #>  2.   └─testthat::expect_s3_class(tbl, "data.frame")
    #> ── Failure: failure 2 ──────────────────────────────────────────────────────────
    #> Expected `nrow(tbl)` to equal `n`.
    #> Differences:
    #>   `actual`: 5.0
    #> `expected`: 2.0
    #>
    #> Backtrace:
    #>     ▆
    #>  1. └─global expect_nrow(matrix(1:5), 2)
    #>  2.   └─testthat::expect_equal(nrow(tbl), n)
    #> Error:
    #> ! Test failed with 2 failures and 0 successes.

Each of these tests contain a single expectation, but they report a total of two successes and failures. It would be confusing if testthat didn’t report these numbers correctly. But as a helper in your package, it’s probably not a big deal.

You might also notice that these failures generate a backtrace whereas built-in expectations don’t. Again, it’s not a big deal because the backtrace is correct, it’s just not needed.

These are both minor issues, so if they don’t bother you, you can save yourself some pain by not reading this vignette 😀.

## Expectation basics

An expectation has four main parts, as illustrated by `expect_length()`:

    expect_length <- function(object, n) {
      # 1. Capture object and label
      act <- quasi_label(rlang::enquo(object))

      act_n <- length(act$val)
      if (act_n != n) {
        # 2. Fail if expectations are violated
        fail(c(
          sprintf("Expected %s to have length %i.", act$lab, n),
          sprintf("Actual length: %i.", act_n)
        ))
      } else {
        # 3. Pass if expectations are met
        pass()
      }

      # 4. Invisibly return the input value
      invisible(act$val)
    }

The first step in any expectation is to use `quasi_label()` to capture a “labeled value”, i.e., a list that contains both the value (`$val`) for testing and a label (`$lab`) used to make failure messages as informative as possible. This is a pattern that exists for fairly esoteric reasons; you don’t need to understand it, just copy and paste it.

Next you need to check each way that `object` could violate the expectation. In this case, there’s only one check, but in more complicated cases there can be many. Note the specific form of the failure message: the first element describes what we expected, and then the second line reports what we actually saw.

If the object is as expected, call `pass()`. This ensures that a success will be registered in the test reporter.

Otherwise, call `fail()`. This ensures that a failure will be registered in the test reporter. NB: unlike `stop()` or `abort()`, `fail()` signals a failure but allows code execution to continue, ensuring that one failure does not prevent subsequent expectations from running.

Finally, return the input value (`act$val`) invisibly. This is good practice because expectations are called primarily for their side-effects (triggering a failure), and returning the value allows expectations to be piped together:

    test_that("mtcars is a 13 row data frame", {
      mtcars |>
        expect_type("list") |>
        expect_s3_class("data.frame") |>
        expect_length(11)
    })
    #> Test passed with 3 successes 🌈.

### Testing your expectations

Once you’ve written your expectation, you need to test it: expectations are functions that can have bugs, just like any other function, and it’s really important that they generate actionable failure messages. Luckily testthat comes with three expectations designed specifically to test expectations:

- `expect_success()` checks that your expectation emits exactly one success and zero failures.
- `expect_failure()` checks that your expectation emits exactly one failure and zero successes.
- `expect_snapshot_failure()` captures the failure message in a snapshot, making it easier to review whether it’s useful.

The first two expectations are particularly important because they ensure that your expectation always reports either a single success or a single failure. If it doesn’t, the end user is going to get confusing results in their test suite reports.

    test_that("expect_length works as expected", {
      x <- 1:10
      expect_success(expect_length(x, 10))
      expect_failure(expect_length(x, 11))
    })
    #> Test passed with 2 successes 🥳.

    test_that("expect_length gives useful feedback", {
      x <- 1:10
      expect_snapshot_failure(expect_length(x, 11))
    })
    #> ── Warning: expect_length gives useful feedback ────────────────────────────────
    #> Adding new snapshot:
    #> Code
    #>   expect_length(x, 11)
    #> Condition
    #>   Error:
    #>   ! Expected `x` to have length 11.
    #>   Actual length: 10.
    #> Test passed with 1 success 🎊.

## Examples

The following sections show you a few more variations, loosely based on existing testthat expectations. These expectations were picked to show how you can generate actionable failures in slightly more complex situations.

### `expect_vector_length()`

Let’s make `expect_length()` a bit more strict by also checking that the input is a vector. R is a bit unusual in that it gives a length to pretty much every object, and you can imagine not wanting code like the following to succeed, because it’s likely that the user passed the wrong object to the test.

    expect_length(mean, 1)

To do this we’ll add an extra check that the input is either an atomic vector or a list:

    expect_vector_length <- function(object, n) {
      act <- quasi_label(rlang::enquo(object))

      # It's non-trivial to check if an object is a vector in base R so we
      # use an rlang helper
      if (!rlang::is_vector(act$val)) {
        fail(c(
          sprintf("Expected %s to be a vector", act$lab),
          sprintf("Actual type: %s", typeof(act$val))
        ))
      } else {
        act_n <- length(act$val)
        if (act_n != n) {
          fail(c(
            sprintf("Expected %s to have length %i.", act$lab, n),
            sprintf("Actual length: %i.", act_n)
          ))
        } else {
          pass()
        }
      }

      invisible(act$val)
    }

    expect_vector_length(mean, 1)
    #> Error: Expected `mean` to be a vector
    #> Actual type: closure
    expect_vector_length(mtcars, 15)
    #> Error: Expected `mtcars` to have length 15.
    #> Actual length: 11.

### `expect_s3_class()`

Or imagine you’re checking to see if an object inherits from an S3 class. R has a lot of different OO systems, and you want your failure messages to be as informative as possible, so before checking that the class matches, you probably want to check that the object is from the correct OO family.

    expect_s3_class <- function(object, class) {
      if (!rlang::is_string(class)) {
        rlang::abort("`class` must be a string.")
      }

      act <- quasi_label(rlang::enquo(object))

      if (!is.object(act$val)) {
        fail(sprintf("Expected %s to be an object.", act$lab))
      } else if (isS4(act$val)) {
        fail(c(
          sprintf("Expected %s to be an S3 object.", act$lab),
          "Actual OO type: S4"
        ))
      } else if (!inherits(act$val, class)) {
        fail(c(
          sprintf("Expected %s to inherit from %s.", act$lab, class),
          sprintf("Actual class: %s", class(act$val))
        ))
      } else {
        pass()
      }

      invisible(act$val)
    }

    x1 <- 1:10
    TestClass <- methods::setClass("Test", contains = "integer")
    x2 <- TestClass()
    x3 <- factor()

    expect_s3_class(x1, "integer")
    #> Error: Expected `x1` to be an object.
    expect_s3_class(x2, "integer")
    #> Error: Expected `x2` to be an S3 object.
    #> Actual OO type: S4
    expect_s3_class(x3, "integer")
    #> Error: Expected `x3` to inherit from integer.
    #> Actual class: factor
    expect_s3_class(x3, "factor")

Note the variety of error messages. We always print what was expected, and where possible, also display what was actually received:

- When `object` isn’t an object, we can only say what we expected.
- When `object` is an S4 object, we can report that.
- When `inherits()` is `FALSE`, we provide the actual class, since that’s most informative.

The general principle is to tailor error messages to what the user can act on based on what you know about the input.

Also note that I check that the `class` argument is a string. If it’s not a string, I throw an error. This is not a test failure; the user is calling the function incorrectly. In general, you should check the type of all arguments that affect the operation and error if they’re not what you expect.

    expect_s3_class(x1, 1)
    #> Error in `expect_s3_class()`:
    #> ! `class` must be a string.

### Optional `class`

A common pattern in testthat’s own expectations it to use arguments to control the level of detail in the test. Here it would be nice if we check that an object is an S3 object without checking for a specific class. I think we could do that by renaming `expect_s3_class()` to `expect_s3_object()`. Now `expect_s3_object(x)` would verify that `x` is an S3 object, and `expect_s3_object(x, class = "foo")` to verify that `x` is an S3 object with the given class. The implementation of this is straightforward: we also allow `class` to be `NULL` and then only verify inheritance when non-`NULL`.

    expect_s3_object <- function(object, class = NULL) {
      if (!rlang::is_string(class) && is.null(class)) {
        rlang::abort("`class` must be a string or NULL.")
      }

      act <- quasi_label(rlang::enquo(object))

      if (!is.object(act$val)) {
        fail(sprintf("Expected %s to be an object.", act$lab))
      } else if (isS4(act$val)) {
        fail(c(
          sprintf("Expected %s to be an S3 object.", act$lab),
          "Actual OO type: S4"
        ))
      } else if (!is.null(class) && !inherits(act$val, class)) {
        fail(c(
          sprintf("Expected %s to inherit from %s.", act$lab, class),
          sprintf("Actual class: %s", class(act$val))
        ))
      } else {
        pass()
      }

      invisible(act$val)
    }

## Repeated code

As you write more expectations, you might discover repeated code that you want to extract into a helper. Unfortunately, creating 100% correct helper functions is not straightforward in testthat because `fail()` captures the calling environment in order to give useful tracebacks, and testthat’s own expectations don’t expose this as an argument. Fortunately, getting this right is not critical (you’ll just get a slightly suboptimal traceback in the case of failure), so we don’t recommend bothering in most cases. We document it here, however, because it’s important to get it right in testthat itself.

The key challenge is that `fail()` captures a `trace_env`, which should be the execution environment of the expectation. This usually works because the default value of `trace_env` is `rlang::caller_env()`. But when you introduce a helper, you’ll need to explicitly pass it along:

    expect_length_ <- function(act, n, trace_env = caller_env()) {
      act_n <- length(act$val)
      if (act_n != n) {
        fail(
          sprintf("%s has length %i, not length %i.", act$lab, act_n, n),
          trace_env = trace_env
        )
      } else {
        pass()
      }
    }

    expect_length <- function(object, n) {
      act <- quasi_label(rlang::enquo(object))

      expect_length_(act, n)
      invisible(act$val)
    }

A few recommendations:

- The helper shouldn’t be user-facing, so we give it a `_` suffix to make that clear.
- It’s typically easiest for a helper to take the labeled value produced by `quasi_label()`.
- Your helper should usually be called for its side effects (i.e. it calls `fail()` and `pass()`).
- You should return `invisible(act$val)` from the parent expecatation as usual.

Again, you’re probably not writing so many expectations that it makes sense for you to go to this effort, but it is important for testthat to get it right.