head 1.1; branch 1.1.1; access; symbols netbsd-9-5-RELEASE:1.1.1.3 netbsd-11-0-RELEASE:1.1.1.6 xkbprint-1-0-8:1.1.1.7 netbsd-11-0-RC7:1.1.1.6 netbsd-11-0-RC6:1.1.1.6 netbsd-11-0-RC5:1.1.1.6 netbsd-11-0-RC4:1.1.1.6 netbsd-11-0-RC3:1.1.1.6 netbsd-11-0-RC2:1.1.1.6 netbsd-11-0-RC1:1.1.1.6 netbsd-11:1.1.1.6.0.2 netbsd-11-base:1.1.1.6 netbsd-10-1-RELEASE:1.1.1.5 xkbprint-1-0-7:1.1.1.6 netbsd-8-3-RELEASE:1.1.1.3 netbsd-9-4-RELEASE:1.1.1.3 netbsd-10-0-RELEASE:1.1.1.5 netbsd-10-0-RC6:1.1.1.5 netbsd-10-0-RC5:1.1.1.5 netbsd-10-0-RC4:1.1.1.5 netbsd-10-0-RC3:1.1.1.5 netbsd-10-0-RC2:1.1.1.5 netbsd-10-0-RC1:1.1.1.5 netbsd-10:1.1.1.5.0.2 netbsd-10-base:1.1.1.5 xkbprint-1-0-6:1.1.1.5 netbsd-9-3-RELEASE:1.1.1.3 netbsd-9-2-RELEASE:1.1.1.3 netbsd-9-1-RELEASE:1.1.1.3 netbsd-8-2-RELEASE:1.1.1.3 xkbprint-1-0-5:1.1.1.4 netbsd-9-0-RELEASE:1.1.1.3 netbsd-9-0-RC2:1.1.1.3 netbsd-9-0-RC1:1.1.1.3 netbsd-9:1.1.1.3.0.4 netbsd-9-base:1.1.1.3 netbsd-8-1-RELEASE:1.1.1.3 netbsd-8-1-RC1:1.1.1.3 netbsd-7-2-RELEASE:1.1.1.2 netbsd-8-0-RELEASE:1.1.1.3 netbsd-8-0-RC2:1.1.1.3 netbsd-8-0-RC1:1.1.1.3 netbsd-7-1-2-RELEASE:1.1.1.2 netbsd-7-1-1-RELEASE:1.1.1.2 netbsd-8:1.1.1.3.0.2 netbsd-8-base:1.1.1.3 netbsd-7-1:1.1.1.2.0.14 netbsd-7-1-RELEASE:1.1.1.2 netbsd-7-1-RC2:1.1.1.2 netbsd-7-1-RC1:1.1.1.2 netbsd-7-0-2-RELEASE:1.1.1.2 netbsd-7-0-1-RELEASE:1.1.1.2 netbsd-7-0:1.1.1.2.0.12 netbsd-7-0-RELEASE:1.1.1.2 netbsd-7-0-RC3:1.1.1.2 netbsd-7-0-RC2:1.1.1.2 xkbprint-1-0-4:1.1.1.3 netbsd-7-0-RC1:1.1.1.2 netbsd-5-2-3-RELEASE:1.1.1.1 netbsd-5-1-5-RELEASE:1.1.1.1 netbsd-6-0-6-RELEASE:1.1.1.2 netbsd-6-1-5-RELEASE:1.1.1.2 netbsd-7:1.1.1.2.0.10 netbsd-7-base:1.1.1.2 netbsd-6-1-4-RELEASE:1.1.1.2 netbsd-6-0-5-RELEASE:1.1.1.2 riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.1.1.2 riastradh-drm2:1.1.1.2.0.8 riastradh-drm2-base:1.1.1.2 netbsd-6-1-3-RELEASE:1.1.1.2 netbsd-6-0-4-RELEASE:1.1.1.2 netbsd-5-2-2-RELEASE:1.1.1.1 netbsd-5-1-4-RELEASE:1.1.1.1 netbsd-6-1-2-RELEASE:1.1.1.2 netbsd-6-0-3-RELEASE:1.1.1.2 netbsd-5-2-1-RELEASE:1.1.1.1 netbsd-5-1-3-RELEASE:1.1.1.1 netbsd-6-1-1-RELEASE:1.1.1.2 netbsd-6-1:1.1.1.2.0.6 netbsd-6-0-2-RELEASE:1.1.1.2 netbsd-6-1-RELEASE:1.1.1.2 netbsd-6-1-RC4:1.1.1.2 netbsd-6-1-RC3:1.1.1.2 netbsd-6-1-RC2:1.1.1.2 netbsd-6-1-RC1:1.1.1.2 netbsd-5-2:1.1.1.1.0.8 netbsd-6-0-1-RELEASE:1.1.1.2 netbsd-5-2-RELEASE:1.1.1.1 netbsd-5-2-RC1:1.1.1.1 netbsd-6-0:1.1.1.2.0.4 netbsd-6-0-RELEASE:1.1.1.2 netbsd-6-0-RC2:1.1.1.2 netbsd-6-0-RC1:1.1.1.2 netbsd-6:1.1.1.2.0.2 netbsd-6-base:1.1.1.2 netbsd-5-1-2-RELEASE:1.1.1.1 netbsd-5-1-1-RELEASE:1.1.1.1 xkbprint-1-0-3:1.1.1.2 netbsd-5-1:1.1.1.1.0.6 netbsd-5-1-RELEASE:1.1.1.1 netbsd-5-1-RC4:1.1.1.1 netbsd-5-1-RC3:1.1.1.1 xkbprint-1-0-2:1.1.1.2 netbsd-5-1-RC2:1.1.1.1 netbsd-5-1-RC1:1.1.1.1 netbsd-5-0-2-RELEASE:1.1.1.1 netbsd-5-0-1-RELEASE:1.1.1.1 netbsd-5-0:1.1.1.1.0.4 netbsd-5-0-RELEASE:1.1.1.1 netbsd-5-0-RC4:1.1.1.1 netbsd-5-0-RC3:1.1.1.1 netbsd-5-0-RC2:1.1.1.1 netbsd-5-0-RC1:1.1.1.1 netbsd-5:1.1.1.1.0.2 netbsd-5-base:1.1.1.1 xkbprint-1-0-1:1.1.1.1 xorg:1.1.1; locks; strict; comment @# @; 1.1 date 2008.07.30.04.22.34; author mrg; state Exp; branches 1.1.1.1; next ; 1.1.1.1 date 2008.07.30.04.22.34; author mrg; state Exp; branches; next 1.1.1.2; 1.1.1.2 date 2010.05.21.04.37.05; author mrg; state Exp; branches; next 1.1.1.3; 1.1.1.3 date 2015.07.19.22.41.03; author mrg; state Exp; branches; next 1.1.1.4; commitid sP8RAR6Do1e2PWty; 1.1.1.4 date 2020.02.23.09.37.04; author mrg; state Exp; branches; next 1.1.1.5; commitid g1mSuaTA6nY0uMXB; 1.1.1.5 date 2022.10.16.23.49.12; author mrg; state Exp; branches; next 1.1.1.6; commitid vo2GRiXCANIc90YD; 1.1.1.6 date 2024.11.16.20.38.42; author mrg; state Exp; branches; next 1.1.1.7; commitid JRRp3nE1LTkgBUxF; 1.1.1.7 date 2026.07.22.21.31.42; author mrg; state Exp; branches; next ; commitid 7DcMuxN8PCjNbHOG; desc @@ 1.1 log @Initial revision @ text @#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.4 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 @ 1.1.1.1 log @initial import of xkbprint-1.0.1 @ text @@ 1.1.1.2 log @initial import of xkbprint-1.0.2 @ text @d3 1 a3 5 scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. d17 3 a19 1 # along with this program. If not, see . a31 2 sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' d41 1 a41 3 msg="missing on your system" case $1 in a46 9 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi d48 5 a69 1 autom4te touch the output file, or create a stub one d77 1 a77 7 yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? d81 1 a81 2 echo "missing $scriptversion (GNU Automake)" exit $? d90 1 a90 27 esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) a93 5 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 a94 2 ;; esac a95 4 # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) d97 1 a97 1 WARNING: \`$1' is $msg. You should only need it if d104 6 a109 1 autoconf*) d111 1 a111 1 WARNING: \`$1' is $msg. You should only need it if d118 6 a123 1 autoheader*) d125 1 a125 1 WARNING: \`$1' is $msg. You should only need it if d133 1 a133 1 case $f in d143 5 d149 1 a149 1 WARNING: \`$1' is $msg. You should only need it if d158 6 a163 1 autom4te*) d165 2 a166 2 WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the d171 2 a172 2 file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` d186 1 a186 1 bison*|yacc*) d188 1 a188 1 WARNING: \`$1' $msg. You should only need it if d193 1 a193 1 if test $# -ne 1; then d195 1 a195 1 case $LASTARG in d198 1 a198 1 if test -f "$SRCFILE"; then d202 1 a202 1 if test -f "$SRCFILE"; then d208 1 a208 1 if test ! -f y.tab.h; then d211 1 a211 1 if test ! -f y.tab.c; then d216 1 a216 1 lex*|flex*) d218 1 a218 1 WARNING: \`$1' is $msg. You should only need it if d223 1 a223 1 if test $# -ne 1; then d225 1 a225 1 case $LASTARG in d228 1 a228 1 if test -f "$SRCFILE"; then d234 1 a234 1 if test ! -f lex.yy.c; then d239 6 a244 1 help2man*) d246 1 a246 1 WARNING: \`$1' is $msg. You should only need it if d251 5 a255 3 file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then d260 1 a260 1 exit $? d264 6 a269 1 makeinfo*) d271 1 a271 1 WARNING: \`$1' is $msg. You should only need it if d277 1 a277 3 # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` d279 3 a281 14 # ... or it is the one specified with @@setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 d285 1 a285 1 tar*) d287 4 d303 1 a303 1 case $firstarg in d309 1 a309 1 case $firstarg in d326 2 a327 2 WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the a336 8 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: @ 1.1.1.3 log @initial import of xkbprint-1.0.4 @ text @d2 1 a2 1 # Common wrapper for a few potentially missing GNU programs. d4 1 a4 1 scriptversion=2013-10-28.13; # UTC d6 3 a8 2 # Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. d29 1 a29 1 echo 1>&2 "Try '$0 --help' for more information" d33 11 a43 1 case $1 in d45 1 a45 5 --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; d47 16 a62 4 --run) # Back-compat with the calling convention used by older automake. shift ;; d68 2 a69 2 Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. d74 1 d77 12 a88 2 aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man d90 2 a91 2 Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. d103 2 a104 2 echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" d110 23 a132 2 # Run the given program, remember its exit status. "$@@"; st=$? d134 63 a196 2 # If it succeeded, we are done. test $st -eq 0 && exit 0 d198 169 a366 17 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi d368 1 a368 104 perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st @ 1.1.1.4 log @initial import of xkbprint-1.0.5 @ text @d4 1 a4 1 scriptversion=2018-03-07.03; # UTC d6 1 a6 1 # Copyright (C) 1996-2018 Free Software Foundation, Inc. d20 1 a20 1 # along with this program. If not, see . d104 3 a106 3 perl_URL=https://www.perl.org/ flex_URL=https://github.com/westes/flex gnu_software_URL=https://www.gnu.org/software d210 1 a210 1 # eval: (add-hook 'before-save-hook 'time-stamp) d213 1 a213 1 # time-stamp-time-zone: "UTC0" @ 1.1.1.5 log @initial import of xkbprint-1.0.6 @ text @d6 1 a6 1 # Copyright (C) 1996-2021 Free Software Foundation, Inc. @ 1.1.1.6 log @initial import of xkbprint-1.0.7 @ text @d2 1 a2 1 # Common wrapper for a few potentially missing GNU and other programs. d4 1 a4 1 scriptversion=2024-06-07.14; # UTC d6 1 a6 3 # shellcheck disable=SC2006,SC2268 # we must support pre-POSIX shells # Copyright (C) 1996-2024 Free Software Foundation, Inc. d57 2 a58 2 aclocal autoconf autogen autoheader autom4te automake autoreconf bison flex help2man lex makeinfo perl yacc d63 1 a63 3 Report bugs to . GNU Automake home page: . General help using GNU software: ." d68 1 a68 1 echo "missing (GNU Automake) $scriptversion" d111 1 a111 1 aclocal|automake|autoreconf) a125 3 *) : ;; a139 3 autoheader_deps="'acconfig.h'" automake_deps="'Makefile.am'" aclocal_deps="'acinclude.m4'" a140 4 aclocal*) echo "You should only need it if you modified $aclocal_deps or" echo "$configure_deps." ;; d142 3 a144 6 echo "You should only need it if you modified $configure_deps." ;; autogen*) echo "You should only need it if you modified a '.def' or '.tpl' file." echo "You may want to install the GNU AutoGen package:" echo "<$gnu_software_URL/autogen/>" d147 1 a147 1 echo "You should only need it if you modified $autoheader_deps or" d149 1 d152 6 a157 1 echo "You should only need it if you modified $automake_deps or" d159 1 d161 1 a161 1 autom4te*) d164 1 a164 5 ;; autoreconf*) echo "You should only need it if you modified $aclocal_deps or" echo "$automake_deps or $autoheader_deps or $automake_deps or" echo "$configure_deps." d171 5 a181 5 lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; a191 6 perl*) echo "You should only need it to run GNU Autoconf, GNU Automake, " echo " assorted other tools, or if you modified a Perl source file." echo "You may want to install the Perl 5 language interpreter:" echo "<$perl_URL>" ;; a199 1 program_details "$normalized_program" @ 1.1.1.7 log @initial import of xkbprint-1.0.8 @ text @d4 1 a4 1 scriptversion=2025-06-18.21; # UTC d8 1 a8 1 # Copyright (C) 1996-2025 Free Software Foundation, Inc. d231 1 a231 1 # eval: (add-hook 'before-save-hook 'time-stamp nil t) d233 1 a233 1 # time-stamp-format: "%Y-%02m-%02d.%02H" @