head 1.4; access; symbols pkgsrc-2026Q3:1.4.0.4 pkgsrc-2026Q3-base:1.4 pkgsrc-2026Q2:1.4.0.2 pkgsrc-2026Q2-base:1.4 pkgsrc-2020Q1:1.1.0.2 pkgsrc-2020Q1-base:1.1 pkgsrc-2019Q4:1.1.0.4 pkgsrc-2019Q4-base:1.1; locks; strict; comment @# @; 1.4 date 2026.05.14.13.27.32; author adam; state Exp; branches; next 1.3; commitid zIgMgyzDp275JMFG; 1.3 date 2020.04.08.08.07.17; author adam; state dead; branches; next 1.2; commitid euxYrGZQzr13xy3C; 1.2 date 2020.04.07.15.51.50; author mef; state Exp; branches; next 1.1; commitid ew0BImHDOC0H8t3C; 1.1 date 2019.10.04.10.41.44; author adam; state Exp; branches; next ; commitid 1wATPUIrCITVoxFB; desc @@ 1.4 log @uhd: updated to 4.10.0.0 UHD 4.10.0.0 Highlights / Main Changes Support for USRP X420 Addition of timed complex gain feature, which allows setting a complex gain value to fix phase and amplitude of signals from radio blocks New Features CMake: Create UHD::uhd package for improved integration in downstream build processes. The init_usrp example is used to showcase this feature. Improved options for RFNoC OOT modules to write unit tests. Add helper routines to up- and download data (reliably) from and to the DRAM block X310: Allow daughterboards to set dboard clock rate Improve finding of MPM-based devices by making parts of the find call asynchronous and allowing to skip reachability checks. RFNoC: Added new optional feature to all Radio blocks - Timed complex gain: Allows specifying complex gain coefficients to be applied to all TX and/or RX samples of a radio channel at the specified time. Enabled by default for all TX and RX channels of the radio blocks, but can be disabled at FPGA build time via the EN_COMP_GAIN_TX and EN_COMP_GAIN_RX parameters of the radio blocks. NOTE: For the x440_X4_400 default FPGA design provided with UHD, enabling this feature for all 8 RX and TX channels necessitated restricting the existing crossbar connections between the replay blocks and the radio blocks. As a result, only blocks with the same indices can be connected (e.g. replay0<->radio0 and replay1<->radio1 only) when using this pre-built USRP FPGA image. Blocks may now drive the front-panel GPIO pins on all RFNoC-capable devices. New IO signatures are added, and all device BSPs have IO ports for accessing the GPIOs. Device controls are updated such that the user can choose the source for GPIOs dynamically in this case (i.e., the radio blocks and other GPIO sources are still available). In some cases, the device BSP HDL had to be significantly refactored. Add names and descriptions for block's and module's YAML files, so that other tools may read information about those in an automated fashion Allow mtu stream argument, which overrides the MTU value that is derived from the link information. Action handling is now moved to its own thread (there is one action handling thread per graph). This allows actions to be handled asynchronously, e.g., when triggering actions from async message handlers. Add radio_state IO signature, so that other blocks can monitor the ATR state of radio blocks. All RFNoC devices can now take an mtu stream argument (which overrides the detected link MTU) and a force_mtu device argument (which skips automatic MTU detection and forces a fixed value). These are helpful in scenarios where a specific network topology interferes with path MTU discovery, and for remote streaming when the MTU for a remote stream link cannot be inferred from UHD. rfnoc_modtool has improved support for generating unit tests. Add PPS IO signature for all targets Add stream command to start receiving when a transmit occurs Null source/sink: Add finite mode. Add UX1/UX2/UX4 QSFP configurations for X4xx API Changes meta_range_t and uhd::dict can now be initialized from initializer lists Add rfnoc_graph::get_chdr_xport_adapters() Python API now allows creating SubdevSpec from a string Some public APIs that used boost::optional now also work with std::optional Unit tests for RFNoC blocks (in-tree and out-of-tree) no longer require a dummy implementation of ~make_args_t() uhd::cast::to_str() was added and uhd::cast::from_str() was extended to be a full replacement for boost::lexical_cast Examples Overhauled many of the examples to improve documentation, as well as some minor conveniences or bug fixes Added continuous streaming to tx_samples_from_file Improved gpio example. Bug Fixes Fix static UHD library builds Fix compatibility with Boost 1.89 RFNoC: Fix slicing notation in rfnoc_image_builder Fix building of GRC files with empty default target (this would affect builds of X410 and X440 device bitfiles from GNU Radio) Fix installation of OOT modules in Python venvs Fix time alignment of first sample Unit tests in RFNoC OOT modules now preload their DLLs to ensure the correct library version is loaded Fix generation of GNU Radio C++ block controllers rfnoc_modtool: Fix creation of spurious unit tests, fix package_data for Python module installation rfnoc_modtool: Fix connection check for invalid ports Fix alignment of first sample coming from radio block. Fix bug in ctrlport_endpoint which could cause the software to believe the associated RFNoC block's command FIFO was full when packets were lost Add parameter to skip waiting for ACKs in async messages E31x: Fix GPIO control E3xx/B2xx: Fix rounding bug for RF PLL tuning B2xx: Fix image loading via b200_image_loader when multiple devices are attached X410: Fix tuning when power calibration and non-default gain profiles are used. Power calibration tools: Fix settings for E320, allow non-default sampling rate, other minor fixes FPGA Fix various simulation-related bugs USRP Simulator: Update to match current UHD. multi_usrp: Improved bank name check in multi_usrp::{set,get}_gpio_attr() CMake: Allow absolute paths for install dirs in pkg-config Fix target include path for Python module USRP1: Fix converter name in property tree FPGA: Fix various simulation/testbench issues. Improve resource utilization in various places. MPM: Fix file descriptor leaks by using with/open everywhere. Fix double-free issue in rpclib. Remove tolerance for non-existing EEPROMs. Examples: Properly report errors when opening a file failed. Python: When installing into venvs, no longer force a reinstallation of dependencies. Dependencies changes Increase minimum required versions Boost to 1.71 DPDK to 19.11 Changed minimum CMake versions for various non-UHD projects, e.g. firmware builds, to stay compatible with CMake 4 Documentation Restructured the UHD manual, improved chapter structure, improved getting started content, added RFNoC specification. Fixed some external links Many smaller improvements (typos, duplicate entries removed, formatting, etc.) Codebase Management Increased C++ version to 20 for UHD library, examples, and utilities Removed Boost in multiple locations and replaced with standard library calls Fix numerous (mostly harmless) compiler and Doxygen warnings Improve CMake linking instructions Validated OS Environments (Versions for build and runtime dependencies can be determined from the docker container definitions in the UHD repository at .ci/docker/...) Linux: Ubuntu: jammy (22.04), noble (24.04), questing (25.10) Fedora: 40, 41, 42 Windows: 10 22H2, 11 24H2 MacOS: Sequoia (15.6) @ text @$NetBSD$ Fix man page installation. https://github.com/EttusResearch/uhd/issues/921 --- docs/CMakeLists.txt.orig 2026-05-14 12:56:32.758885886 +0000 +++ docs/CMakeLists.txt @@@@ -89,8 +89,12 @@@@ if(ENABLE_MAN_PAGES) UHD_INSTALL(FILES ${man_page_gz_files} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) add_custom_target(man_page_gzips ALL DEPENDS ${man_page_gz_files}) else(ENABLE_MAN_PAGE_COMPRESSION) + foreach(manfile ${man_page_sources}) + set(manfile "${CMAKE_CURRENT_SOURCE_DIR}/manpages/${manfile}") + list(APPEND man_page_files ${manfile}) + endforeach(manfile ${man_page_sources}) # uncompressed man pages; just install them - UHD_INSTALL(FILES ${man_page_sources} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) + UHD_INSTALL(FILES ${man_page_files} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) endif(ENABLE_MAN_PAGE_COMPRESSION) endif(ENABLE_MAN_PAGES) @ 1.3 log @uhd: fix building when py-numpy is also installed; docs/CMakeLists.txt is not necessary any more @ text @d1 1 a1 1 $NetBSD: patch-docs_CMakeLists.txt,v 1.2 2020/04/07 15:51:50 mef Exp $ d3 2 a4 1 Do not compress man pages. d6 11 a16 28 --- host/docs/CMakeLists.txt.orig 2020-01-01 13:21:49.000000000 +0900 +++ docs/CMakeLists.txt 2020-04-08 00:01:23.449612527 +0900 @@@@ -178,28 +178,5 @@@@ LIBUHD_REGISTER_COMPONENT("Man Pages" ENABLE_MAN_PAGES ON "${MAN_PAGES_DEPS}" OFF OFF) if(ENABLE_MAN_PAGES) - #Generate man pages; either compressed or not - if(ENABLE_MAN_PAGE_COMPRESSION) - # compress man pages - foreach(manfile ${man_page_sources}) - #make the gzip file depend on the text file - string(REPLACE ".1" "" PROGRAM_NAME "${manfile}") - set(gzfile "${CMAKE_CURRENT_BINARY_DIR}/${manfile}.gz") - set(manfile "${CMAKE_CURRENT_SOURCE_DIR}/${manfile}") - add_custom_command( - OUTPUT ${gzfile} - DEPENDS ${manfile} - COMMAND ${GZIP_EXECUTABLE} -9 -cf ${manfile} > ${gzfile} - COMMENT "Generating ${PROGRAM_NAME} man page" - ) - #make the man page target depend on the gz file - list(APPEND man_page_gz_files ${gzfile}) - endforeach(manfile ${man_page_sources}) - #make the man pages a build-time dependency - UHD_INSTALL(FILES ${man_page_gz_files} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) - add_custom_target(man_page_gzips ALL DEPENDS ${man_page_gz_files}) - else(ENABLE_MAN_PAGE_COMPRESSION) - # uncompressed man pages; just install them d18 2 a19 2 - endif(ENABLE_MAN_PAGE_COMPRESSION) + UHD_INSTALL(FILES ${man_page_sources} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) d21 1 @ 1.2 log @(ham/uhd) Updated to 3.15.0.0 ## 003.015.000.000 * N320: Fix MCR initialization, fix checks for LO distribution board, reset RX IQ balance on init, replace DRAM FIFO with replay block, improve constraints, fix I/Q imbalance compensation, add FPGPIO control * N310: increase default dc offset averaging window, make tunes asynchronous, add capability to control RF filter bypass and freq.band limits, fix setting user DB EEPROM, correctly report N321 vs N320, improve DDR3 BIST, update max revision to 7, fix DMA arbitration to use contiguous packets, replace DRAM FIFO with replay block, fix SFP link up status, add workaround for clocking interference with external reference clocks, disable gpsdo clock/time source options when enable_gps=0 * X300: Fix max bitfile size, fix GPIO ATR property access type, heavily refactor, introduce conn_mgr, add DPDK support, add capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz and 23.04 MHz system ref rates, improve usage of constrained device args, enable ADC gain through RFNoC API, add mode to set master clock rate to arbitrary values between 184.32 and 200 MHz, throttle muxed_zero_copy_if * E320: Fix time source clobbering ref source, add support for RevE, fix reporting of FPGA version hash, fix SFP link up status, fix missing ce_clk driver * E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA arbitration to use contiguous packets, reduced DMA chans to 4 (using data stream muxing), fix DRAM_TEST target build * E3xx: Correct frontend name in devtest * B200: Add command to query bootloader status, fix sc12 streaming, fix FIFO sizes on GPIFII interface * UBX: add temperature compensation mode * SBX: Only update ATRs when lock state changes * TwinRX: add LO charge pump properties, increase default charge pump value on LO1, add low spur tuning mode, fix duplicate write to N value in DDC * RFNoC/device3: Read command FIFO size from device instead of hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now defaults to ON, search all nodes for tick rate, add update_graph() call which lets blocks do a graph-wide update of properties, fix missing port arg in SR_WRITE Noc-Script call, constrain send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable FC ACKs for lossless links * RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in the window block, fix phase reset and -accumulator for DDC and DUC blocks, fix flushing on split-stream block, fix DC offset issue with DDS by using proper rounding, fix DUC/DDC sample rate switching by latching N on M in axi_rate_change, various fixes to uhd_image_builder, fix MTU settings in blocks, align byte count to 8-byte word * RFNOC: Allow UHD_RFNOC_DIR to contain multiple paths * Python API: Replace Boost.Python with PyBind11, fix benchmark_rate statistics, fix phase alignment test script * Python API: Added include of complex.h to allow pybind to convert complex data types * Python API: Make multi_usrp::get_*_usrp_info() return a Python dict * Python API: Fix array processing in send_waveforms() * UHD: Allow ignoring fallthrough warnings, reduce Boost footprint, remove gpsd dependency, improve streaming, reduced the number of compiler warnings, introduce pop() to the prop tree, add typecast operator from uhd::dict<> to std::map<>, properly cache config file data * MPM/mpmd: Introduce compatible rev numbers to support future hardware, fix some resource leaks in mpmd, fix spurious reclaims causing unnecessary warnings, fix resource leaks in liberio xport, allow to mux data streams over liberio transports (e.g. to require fewer DMA channels on E310), wait for DPDK links to come up before proceeding, relax failure handling when updating components (fixes spurious errors when updating FPGA images over SFP), fix issue where RPC initialization would hang on failure * MPM: Re-enable RPC server timeouts after components have been updated * MPMD: Remove arbitraty frame size defaults for UDP transports * MPMD: Fix incorrect link rate warnings * FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3, broke various paths with critical timing, allow SystemVerilog source files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk FIFOs * USB: Allow cancelled USB requests to occur * USB: Fix global session race condition * Logging: Always honour log level, don't log colours for non-ttys, fix includes, demote various log messages, fix logging colours, fix deadlock on Windows machines * Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in tx_samples_c * Examples: Remove thread priority elevation * Examples: Add options to benchmark_rate for start delays and priority * Tests: Make the Python interpreter for devtests a parameter, add unit tests to MPM * Utilities: Fix converter benchmark for Py3k and scaling issue * Tools: Fix kitchen_sink * Tools: Fix Wireshark dissectors to work with WS1, 2, and 3 * Tools: Various fixes to FPGA functional verification tests * Docs: Various fixes, fix Doxygen warnings, fix links to KB, update DPDK information about building libraries, add DPDK subsection about thread priorities, update testing procedures * C API: Add uhd_get_abi_string, uhd_get_version_string * CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR from the CMake commandline, add replay example, fix missing 'project', replace ENABLE_PYTHON3 with a simpler Python detection, clean up superfluous modules, improve log statements, bump dependency min versions, add MPM unit testing, fix missing BIGOBJ for MSVC, add our own UHDBoost.cmake to better find Boost across versions and systems, constrain DPDK check to exact version * Formatting: Apply clang-format to all files, break after template<> @ text @d1 1 a1 1 $NetBSD: patch-docs_CMakeLists.txt,v 1.1 2019/10/04 10:41:44 adam Exp $ @ 1.1 log @uhd: updated to 3.14.1.1 003.014.001.001 Device3: latch n on m in axi_rate_change in DUC/DDC Device3: UART: fix TX <-> RX, FIFO size as parameter Device3: Restore default buffer sizes for MPMD UDP RFNoC: Fix off by one error in window.v E320: fix time source clobbering ref source B200: Add command to query bootloader status RFNoC: fix multidevice graph connections MPMD: Fix corner case in MPM device discovery MPM: fixed mboard_max_revision value (MPM compat check failures) MPM: Fix version string for logger Docs: x300: update docs for multiple timed commands Docs: Fix Doxygen warnings due to spurious backslashes Docs: RFNoC: Fix Doxygen warning due to undoc'd parameter Docs: Adjust FPGA functional verification tests Docs: Fix MPM cmake command for E320 RFNoC: Re-enable flow ctrl for blocks on same xbar Tools: Fix build issues with kitchen_sink cmake: Add UHD_COMPONENT variable @ text @d1 1 a1 1 $NetBSD$ d5 3 a7 3 --- docs/CMakeLists.txt.orig 2019-10-03 17:48:04.000000000 +0000 +++ docs/CMakeLists.txt @@@@ -150,23 +150,5 @@@@ LIBUHD_REGISTER_COMPONENT("Man Pages" EN d9 1 d11 25 a35 21 #Generate man pages - foreach(manfile ${man_page_sources}) - #make the gzip file depend on the text file - string(REPLACE ".1" "" PROGRAM_NAME "${manfile}") - set(gzfile "${CMAKE_CURRENT_BINARY_DIR}/${manfile}.gz") - set(manfile "${CMAKE_CURRENT_SOURCE_DIR}/${manfile}") - add_custom_command( - OUTPUT ${gzfile} - DEPENDS ${manfile} - COMMAND ${GZIP_EXECUTABLE} -9 -cf ${manfile} > ${gzfile} - COMMENT "Generating ${PROGRAM_NAME} man page" - ) - - #make the man page target depend on the gz file - list(APPEND man_page_gz_files ${gzfile}) - UHD_INSTALL(FILES ${gzfile} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) - endforeach(manfile ${man_page_sources}) - - #make the man pages a build-time dependency - add_custom_target(man_page_gzips ALL DEPENDS ${man_page_gz_files}) + UHD_INSTALL(FILES ${man_page_sources} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages) @