head 1.3; access; symbols pkgsrc-2026Q3:1.2.0.2 pkgsrc-2026Q3-base:1.2 pkgsrc-2026Q2:1.1.0.6 pkgsrc-2026Q2-base:1.1 pkgsrc-2026Q1:1.1.0.4 pkgsrc-2026Q1-base:1.1 pkgsrc-2025Q4:1.1.0.2 pkgsrc-2025Q4-base:1.1; locks; strict; comment @# @; 1.3 date 2026.09.27.13.21.14; author wen; state Exp; branches; next 1.2; commitid 3xXdO4IWGy3MjgXG; 1.2 date 2026.07.16.19.03.39; author wiz; state Exp; branches; next 1.1; commitid FQnRlmCjzrRuxUNG; 1.1 date 2025.11.15.13.08.36; author wen; state Exp; branches; next ; commitid CnysqnYJEsz8pEiG; desc @@ 1.3 log @Update to 1.000180 Upstream changes: 1.000180 2026-09-11 10:37:49-07:00 America/Los_Angeles - Apply --cover-exclude-dirs to coverage produced by processes yath did not launch, such as a descendant that loads the coverage plugin itself. - Coverage events now carry file and sub counts instead of the full file map, which is already reproduced in the aggregated coverage data. - Resolve exclusions against the root a coverage event names, so a producer measuring against its own directory is filtered correctly rather than by guess. - The log now records coverage events as they are sent onward, with exclusions applied and the file map collapsed. 1.000179 2026-09-08 14:40:06-07:00 America/Los_Angeles - Add --cover-exclude-dirs to leave a directory, and everything under it, out of file coverage and coverage metrics; useful when a dependency tree is installed inside the working directory. - File coverage and coverage metrics now require Test2::Plugin::Cover 0.000029 or newer. 1.000178 2026-09-04 13:37:49-07:00 America/Los_Angeles - Cut the time `make test` takes by roughly five times, by removing fixed waits from the test suite and moving its slowest tests behind AUTHOR_TESTING. - Make the wait loop in App::Yath::Tester sleep the fraction of a second it asks for instead of not sleeping at all, so it stops spinning while a yath run is in progress. - Escalate to KILL when App::Yath::Tester gives up waiting on a yath run, so a run that ignores TERM no longer hangs the test file that started it. 1.000177 2026-08-26 09:41:18-07:00 America/Los_Angeles - Print a note every ten seconds while App::Yath::Tester waits on a yath run, so a slow run does not look like a hung test to the harness running it. - Stop t/integration/resource.t from failing when the scheduler does not hand the same number of tests to each resource slot. 1.000176 2026-08-25 11:05:26-07:00 America/Los_Angeles - Stop a conflict between two installed plugins from aborting every yath command; a plugin whose options cannot be included is now reported and skipped. - Stop the isolate_stdout test in t/unit/App/Yath/Util.t from failing when a module writes to STDERR during global destruction in the forked child. - Stop output that is not TAP, such as a warning from a module, from ending a subtest the harness is still parsing out of a test's STDOUT. - Stop failure_cases.t, concurrency.t, stall_report.t, and the retry-timeout fixture from failing on slow or heavily loaded machines. 1.000175 2026-08-20 11:31:30-07:00 America/Los_Angeles - Add the # HARNESS-SHARES-XXX directive, a shared claim on a name: any number of tests sharing XXX run at once, but none alongside a # HARNESS-CONFLICTS-XXX test, which claims XXX exclusively. - Show a shares column alongside conflicts in the pending and running tables of yath status. - Add --stall-report, off unless asked for, which prints diagnostics when the scheduler stops starting tests while tests are pending and could run. - When --stall-report is enabled, yath processes install a SIGUSR1 handler that prints a stack trace instead of exiting, so a stalled run can be diagnosed. - Add --stall-report-dir to say where --stall-report writes its JSON bundle; it defaults to the directory yath was run from, and a copy also goes to the log. - Fix yath test hanging forever instead of exiting when the event stream ends unexpectedly. 1.000174 2026-08-17 13:00:43-07:00 America/Los_Angeles - Teach find_yath() to check $ENV{YATH_SCRIPT}, the directories paired with @@INC entries, and PATH, so an uninstalled yath script (as CPAN smokers use) is found instead of aborting the test run. - Make the find_yath() failure report every path it checked, plus the current directory, @@INC, PATH, and PERL5LIB, so a report from an unhandled environment can be acted on. - Stop find_yath() from looking for ./scripts/yath, which this dist no longer ships; the yath script re-execs into a local one itself and then names it in YATH_SCRIPT. - Let find_yath() accept a yath script that is readable but not executable, since it is run as an argument to perl; a script found via PATH still needs the exec bit. 1.000173 2026-08-16 22:09:40-07:00 America/Los_Angeles - Skip @@INC hook entries when yath snapshots @@INC, so tools that install one (such as Carmel) no longer abort the run. - Require App::Yath::Script 2.000017, which stops the yath script from destroying an @@INC hook when it re-execs itself for dev-libs. - Fix spelling in the help text for -j, --rerun-plugin, --cover-maybe-from, and the persistent runner commands. - Add [PruneCruft] to dist.ini so build artifacts (blib/, pm_to_blib, MYMETA.*) no longer leak into release tarballs. - Fix the collector pinning a CPU core: it now sleeps between polls instead of busy-looping whenever a job is active. - Keep .yath.rc in the release tarball; [PruneCruft] drops every root dotfile and was undoing the [GatherFile] that ships it. - Run xt/ author tests at release via [RunExtraTests]. - Replace AI_AND_LLM_POLICY.txt with AI_AND_LLM_POLICY.md, barring bot accounts from tickets and pull requests, restating how AI use is noted, and allowing the source as AI/LLM training data. - Fix t/integration/coverage.t failing under Test2::Plugin::Cover 0.000028, which sorts each sub's 'from' list into a different but equally valid order. 1.000172 2026-04-28 21:15:51-07:00 America/Los_Angeles - Fix t/integration/help.t to strip the App::Yath::Script::V# detection message correctly so the test passes under plain prove 1.000171 2026-04-23 03:11:01-07:00 America/Los_Angeles - Depend on the App::Yath::Script dist for the yath script - Bump preload integration test watchdog from 15s to 60s to reduce flakiness on slow CPAN testers hosts 1.000170 2026-04-09 22:35:24-07:00 America/Los_Angeles - Fix encoding test flake: defer :utf8 decode until after child exits to avoid corrupting multi-byte characters during non-blocking reads 1.000169 2026-04-08 15:32:47-07:00 America/Los_Angeles 1.000168 2026-04-07 09:20:34-07:00 America/Los_Angeles - Add --fail-on-resource-skip - Detect and report scheduler death instead of hanging forever - Make scheduler resilient to transient errors 1.000167 2026-04-05 13:52:36-07:00 America/Los_Angeles - Change sleeps to be a bit more sensible 1.000166 2026-04-05 13:41:01-07:00 America/Los_Angeles - No Changes since trial 1.000165 2026-04-04 19:58:16-07:00 America/Los_Angeles (TRIAL RELEASE) - Bugfixes assited by an AI audit - Fixes to busy loops (AI Audit) - Fixes to reset EOF handles when needed (Some AI, one a PR) - Added the --resource-timeout option (AI Assisted) - Note AI assisted in these changes, but I (Exodist) reviewed them carefully. 1.000164 2026-03-31 21:49:47-07:00 America/Los_Angeles - Update to reindex after accidental 2.0 release 1.000163 2026-02-23 20:07:43-08:00 America/Los_Angeles - Fix missing Changes entries 1.000162 2026-02-20 10:37:39-08:00 America/Los_Angeles - add and respect the --no-final-table display option @ text @# $NetBSD: Makefile,v 1.2 2026/07/16 19:03:39 wiz Exp $ DISTNAME= Test2-Harness-1.000180 PKGNAME= p5-${DISTNAME} CATEGORIES= devel perl5 MASTER_SITES= ${MASTER_SITE_PERL_CPAN:=../../authors/id/E/EX/EXODIST/} MAINTAINER= wen@@NetBSD.org HOMEPAGE= https://metacpan.org/release/Test2-Harness COMMENT= Test2 Harness designed for the Test2 event system LICENSE= ${PERL5_LICENSE} DEPENDS+= p5-App-Yath-Script>=0:../../devel/p5-App-Yath-Script DEPENDS+= p5-Data-UUID>=0:../../devel/p5-Data-UUID DEPENDS+= p5-Importer>=0.025:../../devel/p5-Importer DEPENDS+= p5-Long-Jump>=0.000001:../../devel/p5-Long-Jump DEPENDS+= p5-Scope-Guard>=0:../../devel/p5-Scope-Guard DEPENDS+= p5-Term-Table>=0.015:../../devel/p5-Term-Table DEPENDS+= p5-Test2-Plugin-MemUsage>=0.002003:../../devel/p5-Test2-Plugin-MemUsage DEPENDS+= p5-Test2-Plugin-UUID>=0.002001:../../devel/p5-Test2-Plugin-UUID DEPENDS+= p5-YAML-Tiny>=0:../../textproc/p5-YAML-Tiny DEPENDS+= p5-goto-file>=0.005:../../devel/p5-goto-file TEST_DEPENDS+= p5-Test2-Plugin-Cover>=0:../../devel/p5-Test2-Plugin-Vover USE_TOOLS+= perl PERL5_PACKLIST= auto/Test2/Harness/.packlist .include "../../lang/perl5/module.mk" .include "../../mk/bsd.pkg.mk" @ 1.2 log @*: recursive bump for perl5 5.44.0 @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.1 2025/11/15 13:08:36 wen Exp $ d3 1 a3 1 DISTNAME= Test2-Harness-1.000161 a4 1 PKGREVISION= 1 d13 1 d19 1 a19 1 DEPENDS+= p5-Test2-Plugin-MemUsage>=0.002002:../../devel/p5-Test2-Plugin-MemUsage d24 2 @ 1.1 log @Import Test2-Harness-1.000161 as devel/p5-Test2-Harness. Test2::Harness is the backend code that handles running/processing the tests. In general a user will not use it directly, instead you should probably be looking at App::Yath which is the UI layer built around Test2::Harness. @ text @d1 1 a1 1 # $NetBSD$ d5 1 @