head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.49; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @/* * This file is part of the Micro Python project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2013, 2014 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include #include "py/nlr.h" #include "py/runtime.h" #include "py/mphal.h" #include "irq.h" #include "pin.h" #include "genhdr/pins.h" #include "bufhelper.h" #include "dma.h" #include "spi.h" /// \moduleref pyb /// \class SPI - a master-driven serial protocol /// /// SPI is a serial protocol that is driven by a master. At the physical level /// there are 3 lines: SCK, MOSI, MISO. /// /// See usage model of I2C; SPI is very similar. Main difference is /// parameters to init the SPI bus: /// /// from pyb import SPI /// spi = SPI(1, SPI.MASTER, baudrate=600000, polarity=1, phase=0, crc=0x7) /// /// Only required parameter is mode, SPI.MASTER or SPI.SLAVE. Polarity can be /// 0 or 1, and is the level the idle clock line sits at. Phase can be 0 or 1 /// to sample data on the first or second clock edge respectively. Crc can be /// None for no CRC, or a polynomial specifier. /// /// Additional method for SPI: /// /// data = spi.send_recv(b'1234') # send 4 bytes and receive 4 bytes /// buf = bytearray(4) /// spi.send_recv(b'1234', buf) # send 4 bytes and receive 4 into buf /// spi.send_recv(buf, buf) # send/recv 4 bytes from/to buf // Possible DMA configurations for SPI busses: // SPI1_TX: DMA2_Stream3.CHANNEL_3 or DMA2_Stream5.CHANNEL_3 // SPI1_RX: DMA2_Stream0.CHANNEL_3 or DMA2_Stream2.CHANNEL_3 // SPI2_TX: DMA1_Stream4.CHANNEL_0 // SPI2_RX: DMA1_Stream3.CHANNEL_0 // SPI3_TX: DMA1_Stream5.CHANNEL_0 or DMA1_Stream7.CHANNEL_0 // SPI3_RX: DMA1_Stream0.CHANNEL_0 or DMA1_Stream2.CHANNEL_0 // SPI4_TX: DMA2_Stream4.CHANNEL_5 or DMA2_Stream1.CHANNEL_4 // SPI4_RX: DMA2_Stream3.CHANNEL_5 or DMA2_Stream0.CHANNEL_4 // SPI5_TX: DMA2_Stream4.CHANNEL_2 or DMA2_Stream6.CHANNEL_7 // SPI5_RX: DMA2_Stream3.CHANNEL_2 or DMA2_Stream5.CHANNEL_7 // SPI6_TX: DMA2_Stream5.CHANNEL_1 // SPI6_RX: DMA2_Stream6.CHANNEL_1 typedef struct _pyb_spi_obj_t { mp_obj_base_t base; SPI_HandleTypeDef *spi; DMA_Stream_TypeDef *tx_dma_stream; uint32_t tx_dma_channel; DMA_Stream_TypeDef *rx_dma_stream; uint32_t rx_dma_channel; } pyb_spi_obj_t; #if defined(MICROPY_HW_SPI1_SCK) SPI_HandleTypeDef SPIHandle1 = {.Instance = NULL}; #endif #if defined(MICROPY_HW_SPI2_SCK) SPI_HandleTypeDef SPIHandle2 = {.Instance = NULL}; #endif #if defined(MICROPY_HW_SPI3_SCK) SPI_HandleTypeDef SPIHandle3 = {.Instance = NULL}; #endif #if defined(MICROPY_HW_SPI4_SCK) SPI_HandleTypeDef SPIHandle4 = {.Instance = NULL}; #endif #if defined(MICROPY_HW_SPI5_SCK) SPI_HandleTypeDef SPIHandle5 = {.Instance = NULL}; #endif #if defined(MICROPY_HW_SPI6_SCK) SPI_HandleTypeDef SPIHandle6 = {.Instance = NULL}; #endif STATIC const pyb_spi_obj_t pyb_spi_obj[] = { #if defined(MICROPY_HW_SPI1_SCK) {{&pyb_spi_type}, &SPIHandle1, DMA_STREAM_SPI1_TX, DMA_CHANNEL_SPI1_TX, DMA_STREAM_SPI1_RX, DMA_CHANNEL_SPI1_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif #if defined(MICROPY_HW_SPI2_SCK) {{&pyb_spi_type}, &SPIHandle2, DMA_STREAM_SPI2_TX, DMA_CHANNEL_SPI2_TX, DMA_STREAM_SPI2_RX, DMA_CHANNEL_SPI2_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif #if defined(MICROPY_HW_SPI3_SCK) {{&pyb_spi_type}, &SPIHandle3, DMA_STREAM_SPI3_TX, DMA_CHANNEL_SPI3_TX, DMA_STREAM_SPI3_RX, DMA_CHANNEL_SPI3_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif #if defined(MICROPY_HW_SPI4_SCK) {{&pyb_spi_type}, &SPIHandle4, DMA_STREAM_SPI4_TX, DMA_CHANNEL_SPI4_TX, DMA_STREAM_SPI4_RX, DMA_CHANNEL_SPI4_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif #if defined(MICROPY_HW_SPI5_SCK) {{&pyb_spi_type}, &SPIHandle5, DMA_STREAM_SPI5_TX, DMA_CHANNEL_SPI5_TX, DMA_STREAM_SPI5_RX, DMA_CHANNEL_SPI5_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif #if defined(MICROPY_HW_SPI6_SCK) {{&pyb_spi_type}, &SPIHandle6, DMA_STREAM_SPI6_TX, DMA_CHANNEL_SPI6_TX, DMA_STREAM_SPI6_RX, DMA_CHANNEL_SPI6_RX}, #else {{&pyb_spi_type}, NULL, NULL, 0, NULL, 0}, #endif }; void spi_init0(void) { // reset the SPI handles #if defined(MICROPY_HW_SPI1_SCK) memset(&SPIHandle1, 0, sizeof(SPI_HandleTypeDef)); SPIHandle1.Instance = SPI1; #endif #if defined(MICROPY_HW_SPI2_SCK) memset(&SPIHandle2, 0, sizeof(SPI_HandleTypeDef)); SPIHandle2.Instance = SPI2; #endif #if defined(MICROPY_HW_SPI3_SCK) memset(&SPIHandle3, 0, sizeof(SPI_HandleTypeDef)); SPIHandle3.Instance = SPI3; #endif #if defined(MICROPY_HW_SPI4_SCK) memset(&SPIHandle4, 0, sizeof(SPI_HandleTypeDef)); SPIHandle4.Instance = SPI4; #endif #if defined(MICROPY_HW_SPI5_SCK) memset(&SPIHandle5, 0, sizeof(SPI_HandleTypeDef)); SPIHandle5.Instance = SPI5; #endif #if defined(MICROPY_HW_SPI6_SCK) memset(&SPIHandle6, 0, sizeof(SPI_HandleTypeDef)); SPIHandle6.Instance = SPI6; #endif } // TODO allow to take a list of pins to use void spi_init(SPI_HandleTypeDef *spi, bool enable_nss_pin) { // init the GPIO lines GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.Mode = GPIO_MODE_AF_PP; GPIO_InitStructure.Speed = GPIO_SPEED_FAST; GPIO_InitStructure.Pull = spi->Init.CLKPolarity == SPI_POLARITY_LOW ? GPIO_PULLDOWN : GPIO_PULLUP; const pyb_spi_obj_t *self; const pin_obj_t *pins[4]; if (0) { #if defined(MICROPY_HW_SPI1_SCK) } else if (spi->Instance == SPI1) { self = &pyb_spi_obj[0]; pins[0] = &MICROPY_HW_SPI1_NSS; pins[1] = &MICROPY_HW_SPI1_SCK; pins[2] = &MICROPY_HW_SPI1_MISO; pins[3] = &MICROPY_HW_SPI1_MOSI; GPIO_InitStructure.Alternate = GPIO_AF5_SPI1; // enable the SPI clock __SPI1_CLK_ENABLE(); #endif #if defined(MICROPY_HW_SPI2_SCK) } else if (spi->Instance == SPI2) { self = &pyb_spi_obj[1]; pins[0] = &MICROPY_HW_SPI2_NSS; pins[1] = &MICROPY_HW_SPI2_SCK; pins[2] = &MICROPY_HW_SPI2_MISO; pins[3] = &MICROPY_HW_SPI2_MOSI; GPIO_InitStructure.Alternate = GPIO_AF5_SPI2; // enable the SPI clock __SPI2_CLK_ENABLE(); #endif #if defined(MICROPY_HW_SPI3_SCK) } else if (spi->Instance == SPI3) { self = &pyb_spi_obj[2]; pins[0] = &MICROPY_HW_SPI3_NSS; pins[1] = &MICROPY_HW_SPI3_SCK; pins[2] = &MICROPY_HW_SPI3_MISO; pins[3] = &MICROPY_HW_SPI3_MOSI; GPIO_InitStructure.Alternate = GPIO_AF6_SPI3; // enable the SPI clock __SPI3_CLK_ENABLE(); #endif #if defined(MICROPY_HW_SPI4_SCK) } else if (spi->Instance == SPI4) { self = &pyb_spi_obj[3]; pins[0] = &MICROPY_HW_SPI4_NSS; pins[1] = &MICROPY_HW_SPI4_SCK; pins[2] = &MICROPY_HW_SPI4_MISO; pins[3] = &MICROPY_HW_SPI4_MOSI; GPIO_InitStructure.Alternate = GPIO_AF5_SPI4; // enable the SPI clock __SPI4_CLK_ENABLE(); #endif #if defined(MICROPY_HW_SPI5_SCK) } else if (spi->Instance == SPI5) { self = &pyb_spi_obj[4]; pins[0] = &MICROPY_HW_SPI5_NSS; pins[1] = &MICROPY_HW_SPI5_SCK; pins[2] = &MICROPY_HW_SPI5_MISO; pins[3] = &MICROPY_HW_SPI5_MOSI; GPIO_InitStructure.Alternate = GPIO_AF5_SPI5; // enable the SPI clock __SPI5_CLK_ENABLE(); #endif #if defined(MICROPY_HW_SPI6_SCK) } else if (spi->Instance == SPI6) { self = &pyb_spi_obj[5]; pins[0] = &MICROPY_HW_SPI6_NSS; pins[1] = &MICROPY_HW_SPI6_SCK; pins[2] = &MICROPY_HW_SPI6_MISO; pins[3] = &MICROPY_HW_SPI6_MOSI; GPIO_InitStructure.Alternate = GPIO_AF5_SPI6; // enable the SPI clock __SPI6_CLK_ENABLE(); #endif } else { // SPI does not exist for this board (shouldn't get here, should be checked by caller) return; } for (uint i = (enable_nss_pin ? 0 : 1); i < 4; i++) { mp_hal_gpio_clock_enable(pins[i]->gpio); GPIO_InitStructure.Pin = pins[i]->pin_mask; HAL_GPIO_Init(pins[i]->gpio, &GPIO_InitStructure); } // init the SPI device if (HAL_SPI_Init(spi) != HAL_OK) { // init error // TODO should raise an exception, but this function is not necessarily going to be // called via Python, so may not be properly wrapped in an NLR handler printf("OSError: HAL_SPI_Init failed\n"); return; } // After calling HAL_SPI_Init() it seems that the DMA gets disconnected if // it was previously configured. So we invalidate the DMA channel to force // an initialisation the next time we use it. dma_invalidate_channel(self->tx_dma_stream, self->tx_dma_channel); dma_invalidate_channel(self->rx_dma_stream, self->rx_dma_channel); } void spi_deinit(SPI_HandleTypeDef *spi) { HAL_SPI_DeInit(spi); if (0) { #if defined(MICROPY_HW_SPI1_SCK) } else if (spi->Instance == SPI1) { __SPI1_FORCE_RESET(); __SPI1_RELEASE_RESET(); __SPI1_CLK_DISABLE(); #endif #if defined(MICROPY_HW_SPI2_SCK) } else if (spi->Instance == SPI2) { __SPI2_FORCE_RESET(); __SPI2_RELEASE_RESET(); __SPI2_CLK_DISABLE(); #endif #if defined(MICROPY_HW_SPI3_SCK) } else if (spi->Instance == SPI3) { __SPI3_FORCE_RESET(); __SPI3_RELEASE_RESET(); __SPI3_CLK_DISABLE(); #endif #if defined(MICROPY_HW_SPI4_SCK) } else if (spi->Instance == SPI4) { __SPI4_FORCE_RESET(); __SPI4_RELEASE_RESET(); __SPI4_CLK_DISABLE(); #endif #if defined(MICROPY_HW_SPI5_SCK) } else if (spi->Instance == SPI5) { __SPI5_FORCE_RESET(); __SPI5_RELEASE_RESET(); __SPI5_CLK_DISABLE(); #endif #if defined(MICROPY_HW_SPI6_SCK) } else if (spi->Instance == SPI6) { __SPI6_FORCE_RESET(); __SPI6_RELEASE_RESET(); __SPI6_CLK_DISABLE(); #endif } } STATIC HAL_StatusTypeDef spi_wait_dma_finished(SPI_HandleTypeDef *spi, uint32_t timeout) { // Note: we can't use WFI to idle in this loop because the DMA completion // interrupt may occur before the WFI. Hence we miss it and have to wait // until the next sys-tick (up to 1ms). uint32_t start = HAL_GetTick(); while (HAL_SPI_GetState(spi) != HAL_SPI_STATE_READY) { if (HAL_GetTick() - start >= timeout) { return HAL_TIMEOUT; } } return HAL_OK; } /******************************************************************************/ /* Micro Python bindings */ SPI_HandleTypeDef *spi_get_handle(mp_obj_t o) { if (!MP_OBJ_IS_TYPE(o, &pyb_spi_type)) { nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, "expecting an SPI object")); } pyb_spi_obj_t *self = o; return self->spi; } STATIC void pyb_spi_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) { pyb_spi_obj_t *self = self_in; uint spi_num = 1; // default to SPI1 if (self->spi->Instance == SPI2) { spi_num = 2; } else if (self->spi->Instance == SPI3) { spi_num = 3; } #if defined(SPI4) else if (self->spi->Instance == SPI4) { spi_num = 4; } #endif #if defined(SPI5) else if (self->spi->Instance == SPI5) { spi_num = 5; } #endif #if defined(SPI6) else if (self->spi->Instance == SPI6) { spi_num = 6; } #endif if (self->spi->State == HAL_SPI_STATE_RESET) { mp_printf(print, "SPI(%u)", spi_num); } else { if (self->spi->Init.Mode == SPI_MODE_MASTER) { // compute baudrate uint spi_clock; if (self->spi->Instance == SPI2 || self->spi->Instance == SPI3) { // SPI2 and SPI3 are on APB1 spi_clock = HAL_RCC_GetPCLK1Freq(); } else { // SPI1, SPI4, SPI5 and SPI6 are on APB2 spi_clock = HAL_RCC_GetPCLK2Freq(); } uint log_prescaler = (self->spi->Init.BaudRatePrescaler >> 3) + 1; uint baudrate = spi_clock >> log_prescaler; mp_printf(print, "SPI(%u, SPI.MASTER, baudrate=%u, prescaler=%u", spi_num, baudrate, 1 << log_prescaler); } else { mp_printf(print, "SPI(%u, SPI.SLAVE", spi_num); } mp_printf(print, ", polarity=%u, phase=%u, bits=%u", self->spi->Init.CLKPolarity == SPI_POLARITY_LOW ? 0 : 1, self->spi->Init.CLKPhase == SPI_PHASE_1EDGE ? 0 : 1, self->spi->Init.DataSize == SPI_DATASIZE_8BIT ? 8 : 16); if (self->spi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED) { mp_printf(print, ", crc=0x%x", self->spi->Init.CRCPolynomial); } mp_print_str(print, ")"); } } /// \method init(mode, baudrate=328125, *, polarity=1, phase=0, bits=8, firstbit=SPI.MSB, ti=False, crc=None) /// /// Initialise the SPI bus with the given parameters: /// /// - `mode` must be either `SPI.MASTER` or `SPI.SLAVE`. /// - `baudrate` is the SCK clock rate (only sensible for a master). STATIC mp_obj_t pyb_spi_init_helper(const pyb_spi_obj_t *self, mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { static const mp_arg_t allowed_args[] = { { MP_QSTR_mode, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_baudrate, MP_ARG_INT, {.u_int = 328125} }, { MP_QSTR_prescaler, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0xffffffff} }, { MP_QSTR_polarity, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} }, { MP_QSTR_phase, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_dir, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = SPI_DIRECTION_2LINES} }, { MP_QSTR_bits, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} }, { MP_QSTR_nss, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = SPI_NSS_SOFT} }, { MP_QSTR_firstbit, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = SPI_FIRSTBIT_MSB} }, { MP_QSTR_ti, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, { MP_QSTR_crc, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, }; // parse args mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); // set the SPI configuration values SPI_InitTypeDef *init = &self->spi->Init; init->Mode = args[0].u_int; // configure the prescaler mp_uint_t br_prescale = args[2].u_int; if (br_prescale == 0xffffffff) { // prescaler not given, so select one that yields at most the requested baudrate mp_uint_t spi_clock; if (self->spi->Instance == SPI2 || self->spi->Instance == SPI3) { // SPI2 and SPI3 are on APB1 spi_clock = HAL_RCC_GetPCLK1Freq(); } else { // SPI1, SPI4, SPI5 and SPI6 are on APB2 spi_clock = HAL_RCC_GetPCLK2Freq(); } br_prescale = spi_clock / args[1].u_int; } if (br_prescale <= 2) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; } else if (br_prescale <= 4) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4; } else if (br_prescale <= 8) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; } else if (br_prescale <= 16) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16; } else if (br_prescale <= 32) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32; } else if (br_prescale <= 64) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64; } else if (br_prescale <= 128) { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_128; } else { init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256; } init->CLKPolarity = args[3].u_int == 0 ? SPI_POLARITY_LOW : SPI_POLARITY_HIGH; init->CLKPhase = args[4].u_int == 0 ? SPI_PHASE_1EDGE : SPI_PHASE_2EDGE; init->Direction = args[5].u_int; init->DataSize = (args[6].u_int == 16) ? SPI_DATASIZE_16BIT : SPI_DATASIZE_8BIT; init->NSS = args[7].u_int; init->FirstBit = args[8].u_int; init->TIMode = args[9].u_bool ? SPI_TIMODE_ENABLED : SPI_TIMODE_DISABLED; if (args[10].u_obj == mp_const_none) { init->CRCCalculation = SPI_CRCCALCULATION_DISABLED; init->CRCPolynomial = 0; } else { init->CRCCalculation = SPI_CRCCALCULATION_ENABLED; init->CRCPolynomial = mp_obj_get_int(args[10].u_obj); } // init the SPI bus spi_init(self->spi, init->NSS != SPI_NSS_SOFT); return mp_const_none; } /// \classmethod \constructor(bus, ...) /// /// Construct an SPI object on the given bus. `bus` can be 1 or 2. /// With no additional parameters, the SPI object is created but not /// initialised (it has the settings from the last initialisation of /// the bus, if any). If extra arguments are given, the bus is initialised. /// See `init` for parameters of initialisation. /// /// The physical pins of the SPI busses are: /// /// - `SPI(1)` is on the X position: `(NSS, SCK, MISO, MOSI) = (X5, X6, X7, X8) = (PA4, PA5, PA6, PA7)` /// - `SPI(2)` is on the Y position: `(NSS, SCK, MISO, MOSI) = (Y5, Y6, Y7, Y8) = (PB12, PB13, PB14, PB15)` /// /// At the moment, the NSS pin is not used by the SPI driver and is free /// for other use. STATIC mp_obj_t pyb_spi_make_new(mp_obj_t type_in, mp_uint_t n_args, mp_uint_t n_kw, const mp_obj_t *args) { // check arguments mp_arg_check_num(n_args, n_kw, 1, MP_OBJ_FUN_ARGS_MAX, true); // work out SPI bus int spi_id = 0; if (MP_OBJ_IS_STR(args[0])) { const char *port = mp_obj_str_get_str(args[0]); if (0) { #ifdef MICROPY_HW_SPI1_NAME } else if (strcmp(port, MICROPY_HW_SPI1_NAME) == 0) { spi_id = 1; #endif #ifdef MICROPY_HW_SPI2_NAME } else if (strcmp(port, MICROPY_HW_SPI2_NAME) == 0) { spi_id = 2; #endif #ifdef MICROPY_HW_SPI3_NAME } else if (strcmp(port, MICROPY_HW_SPI3_NAME) == 0) { spi_id = 3; #endif } else { nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "SPI(%s) does not exist", port)); } } else { spi_id = mp_obj_get_int(args[0]); if (spi_id < 1 || spi_id > MP_ARRAY_SIZE(pyb_spi_obj) || pyb_spi_obj[spi_id - 1].spi == NULL) { nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "SPI(%d) does not exist", spi_id)); } } // get SPI object const pyb_spi_obj_t *spi_obj = &pyb_spi_obj[spi_id - 1]; if (n_args > 1 || n_kw > 0) { // start the peripheral mp_map_t kw_args; mp_map_init_fixed_table(&kw_args, n_kw, args + n_args); pyb_spi_init_helper(spi_obj, n_args - 1, args + 1, &kw_args); } return (mp_obj_t)spi_obj; } STATIC mp_obj_t pyb_spi_init(mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { return pyb_spi_init_helper(args[0], n_args - 1, args + 1, kw_args); } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_spi_init_obj, 1, pyb_spi_init); /// \method deinit() /// Turn off the SPI bus. STATIC mp_obj_t pyb_spi_deinit(mp_obj_t self_in) { pyb_spi_obj_t *self = self_in; spi_deinit(self->spi); return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_spi_deinit_obj, pyb_spi_deinit); /// \method send(send, *, timeout=5000) /// Send data on the bus: /// /// - `send` is the data to send (an integer to send, or a buffer object). /// - `timeout` is the timeout in milliseconds to wait for the send. /// /// Return value: `None`. STATIC mp_obj_t pyb_spi_send(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { // TODO assumes transmission size is 8-bits wide static const mp_arg_t allowed_args[] = { { MP_QSTR_send, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, }; // parse args pyb_spi_obj_t *self = pos_args[0]; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); // get the buffer to send from mp_buffer_info_t bufinfo; uint8_t data[1]; pyb_buf_get_for_send(args[0].u_obj, &bufinfo, data); // send the data // Note: there seems to be a problem sending 1 byte using DMA the first // time directly after the SPI/DMA is initialised. The cause of this is // unknown but we sidestep the issue by using polling for 1 byte transfer. HAL_StatusTypeDef status; if (bufinfo.len == 1 || query_irq() == IRQ_STATE_DISABLED) { status = HAL_SPI_Transmit(self->spi, bufinfo.buf, bufinfo.len, args[1].u_int); } else { DMA_HandleTypeDef tx_dma; dma_init(&tx_dma, self->tx_dma_stream, &dma_init_struct_spi_i2c, self->tx_dma_channel, DMA_MEMORY_TO_PERIPH, self->spi); self->spi->hdmatx = &tx_dma; self->spi->hdmarx = NULL; status = HAL_SPI_Transmit_DMA(self->spi, bufinfo.buf, bufinfo.len); if (status == HAL_OK) { status = spi_wait_dma_finished(self->spi, args[1].u_int); } dma_deinit(&tx_dma); } if (status != HAL_OK) { mp_hal_raise(status); } return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_spi_send_obj, 1, pyb_spi_send); /// \method recv(recv, *, timeout=5000) /// /// Receive data on the bus: /// /// - `recv` can be an integer, which is the number of bytes to receive, /// or a mutable buffer, which will be filled with received bytes. /// - `timeout` is the timeout in milliseconds to wait for the receive. /// /// Return value: if `recv` is an integer then a new buffer of the bytes received, /// otherwise the same buffer that was passed in to `recv`. STATIC mp_obj_t pyb_spi_recv(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { // TODO assumes transmission size is 8-bits wide static const mp_arg_t allowed_args[] = { { MP_QSTR_recv, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, }; // parse args pyb_spi_obj_t *self = pos_args[0]; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); // get the buffer to receive into vstr_t vstr; mp_obj_t o_ret = pyb_buf_get_for_recv(args[0].u_obj, &vstr); // receive the data HAL_StatusTypeDef status; if (vstr.len == 1 || query_irq() == IRQ_STATE_DISABLED) { status = HAL_SPI_Receive(self->spi, (uint8_t*)vstr.buf, vstr.len, args[1].u_int); } else { DMA_HandleTypeDef tx_dma, rx_dma; if (self->spi->Init.Mode == SPI_MODE_MASTER) { // in master mode the HAL actually does a TransmitReceive call dma_init(&tx_dma, self->tx_dma_stream, &dma_init_struct_spi_i2c, self->tx_dma_channel, DMA_MEMORY_TO_PERIPH, self->spi); self->spi->hdmatx = &tx_dma; } else { self->spi->hdmatx = NULL; } dma_init(&rx_dma, self->rx_dma_stream, &dma_init_struct_spi_i2c, self->rx_dma_channel, DMA_PERIPH_TO_MEMORY, self->spi); self->spi->hdmarx = &rx_dma; status = HAL_SPI_Receive_DMA(self->spi, (uint8_t*)vstr.buf, vstr.len); if (status == HAL_OK) { status = spi_wait_dma_finished(self->spi, args[1].u_int); } if (self->spi->hdmatx != NULL) { dma_deinit(&tx_dma); } dma_deinit(&rx_dma); } if (status != HAL_OK) { mp_hal_raise(status); } // return the received data if (o_ret != MP_OBJ_NULL) { return o_ret; } else { return mp_obj_new_str_from_vstr(&mp_type_bytes, &vstr); } } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_spi_recv_obj, 1, pyb_spi_recv); /// \method send_recv(send, recv=None, *, timeout=5000) /// /// Send and receive data on the bus at the same time: /// /// - `send` is the data to send (an integer to send, or a buffer object). /// - `recv` is a mutable buffer which will be filled with received bytes. /// It can be the same as `send`, or omitted. If omitted, a new buffer will /// be created. /// - `timeout` is the timeout in milliseconds to wait for the receive. /// /// Return value: the buffer with the received bytes. STATIC mp_obj_t pyb_spi_send_recv(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { // TODO assumes transmission size is 8-bits wide static const mp_arg_t allowed_args[] = { { MP_QSTR_send, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, { MP_QSTR_recv, MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, }; // parse args pyb_spi_obj_t *self = pos_args[0]; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); // get buffers to send from/receive to mp_buffer_info_t bufinfo_send; uint8_t data_send[1]; mp_buffer_info_t bufinfo_recv; vstr_t vstr_recv; mp_obj_t o_ret; if (args[0].u_obj == args[1].u_obj) { // same object for send and receive, it must be a r/w buffer mp_get_buffer_raise(args[0].u_obj, &bufinfo_send, MP_BUFFER_RW); bufinfo_recv = bufinfo_send; o_ret = args[0].u_obj; } else { // get the buffer to send from pyb_buf_get_for_send(args[0].u_obj, &bufinfo_send, data_send); // get the buffer to receive into if (args[1].u_obj == MP_OBJ_NULL) { // only send argument given, so create a fresh buffer of the send length vstr_init_len(&vstr_recv, bufinfo_send.len); bufinfo_recv.len = vstr_recv.len; bufinfo_recv.buf = vstr_recv.buf; o_ret = MP_OBJ_NULL; } else { // recv argument given mp_get_buffer_raise(args[1].u_obj, &bufinfo_recv, MP_BUFFER_WRITE); if (bufinfo_recv.len != bufinfo_send.len) { nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, "recv must be same length as send")); } o_ret = args[1].u_obj; } } // send and receive the data HAL_StatusTypeDef status; if (bufinfo_send.len == 1 || query_irq() == IRQ_STATE_DISABLED) { status = HAL_SPI_TransmitReceive(self->spi, bufinfo_send.buf, bufinfo_recv.buf, bufinfo_send.len, args[2].u_int); } else { DMA_HandleTypeDef tx_dma, rx_dma; dma_init(&tx_dma, self->tx_dma_stream, &dma_init_struct_spi_i2c, self->tx_dma_channel, DMA_MEMORY_TO_PERIPH, self->spi); self->spi->hdmatx = &tx_dma; dma_init(&rx_dma, self->rx_dma_stream, &dma_init_struct_spi_i2c, self->rx_dma_channel, DMA_PERIPH_TO_MEMORY, self->spi); self->spi->hdmarx = &rx_dma; status = HAL_SPI_TransmitReceive_DMA(self->spi, bufinfo_send.buf, bufinfo_recv.buf, bufinfo_send.len); if (status == HAL_OK) { status = spi_wait_dma_finished(self->spi, args[2].u_int); } dma_deinit(&tx_dma); dma_deinit(&rx_dma); } if (status != HAL_OK) { mp_hal_raise(status); } // return the received data if (o_ret != MP_OBJ_NULL) { return o_ret; } else { return mp_obj_new_str_from_vstr(&mp_type_bytes, &vstr_recv); } } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_spi_send_recv_obj, 1, pyb_spi_send_recv); STATIC const mp_map_elem_t pyb_spi_locals_dict_table[] = { // instance methods { MP_OBJ_NEW_QSTR(MP_QSTR_init), (mp_obj_t)&pyb_spi_init_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_deinit), (mp_obj_t)&pyb_spi_deinit_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_send), (mp_obj_t)&pyb_spi_send_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_recv), (mp_obj_t)&pyb_spi_recv_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_send_recv), (mp_obj_t)&pyb_spi_send_recv_obj }, // class constants /// \constant MASTER - for initialising the bus to master mode /// \constant SLAVE - for initialising the bus to slave mode /// \constant MSB - set the first bit to MSB /// \constant LSB - set the first bit to LSB { MP_OBJ_NEW_QSTR(MP_QSTR_MASTER), MP_OBJ_NEW_SMALL_INT(SPI_MODE_MASTER) }, { MP_OBJ_NEW_QSTR(MP_QSTR_SLAVE), MP_OBJ_NEW_SMALL_INT(SPI_MODE_SLAVE) }, { MP_OBJ_NEW_QSTR(MP_QSTR_MSB), MP_OBJ_NEW_SMALL_INT(SPI_FIRSTBIT_MSB) }, { MP_OBJ_NEW_QSTR(MP_QSTR_LSB), MP_OBJ_NEW_SMALL_INT(SPI_FIRSTBIT_LSB) }, /* TODO { MP_OBJ_NEW_QSTR(MP_QSTR_DIRECTION_2LINES ((uint32_t)0x00000000) { MP_OBJ_NEW_QSTR(MP_QSTR_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY { MP_OBJ_NEW_QSTR(MP_QSTR_DIRECTION_1LINE SPI_CR1_BIDIMODE { MP_OBJ_NEW_QSTR(MP_QSTR_NSS_SOFT SPI_CR1_SSM { MP_OBJ_NEW_QSTR(MP_QSTR_NSS_HARD_INPUT ((uint32_t)0x00000000) { MP_OBJ_NEW_QSTR(MP_QSTR_NSS_HARD_OUTPUT ((uint32_t)0x00040000) */ }; STATIC MP_DEFINE_CONST_DICT(pyb_spi_locals_dict, pyb_spi_locals_dict_table); const mp_obj_type_t pyb_spi_type = { { &mp_type_type }, .name = MP_QSTR_SPI, .print = pyb_spi_print, .make_new = pyb_spi_make_new, .locals_dict = (mp_obj_t)&pyb_spi_locals_dict, }; @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@