head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.48; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @#include #include #include "py/mpstate.h" #include "py/mphal.h" #include "usb.h" #include "uart.h" // this table converts from HAL_StatusTypeDef to POSIX errno const byte mp_hal_status_to_errno_table[4] = { [HAL_OK] = 0, [HAL_ERROR] = EIO, [HAL_BUSY] = EBUSY, [HAL_TIMEOUT] = ETIMEDOUT, }; NORETURN void mp_hal_raise(HAL_StatusTypeDef status) { nlr_raise(mp_obj_new_exception_arg1(&mp_type_OSError, MP_OBJ_NEW_SMALL_INT(mp_hal_status_to_errno_table[status]))); } void mp_hal_set_interrupt_char(int c) { usb_vcp_set_interrupt_char(c); } int mp_hal_stdin_rx_chr(void) { for (;;) { #if 0 #ifdef USE_HOST_MODE pyb_usb_host_process(); int c = pyb_usb_host_get_keyboard(); if (c != 0) { return c; } #endif #endif byte c; if (usb_vcp_recv_byte(&c) != 0) { return c; } else if (MP_STATE_PORT(pyb_stdio_uart) != NULL && uart_rx_any(MP_STATE_PORT(pyb_stdio_uart))) { return uart_rx_char(MP_STATE_PORT(pyb_stdio_uart)); } __WFI(); } } void mp_hal_stdout_tx_str(const char *str) { mp_hal_stdout_tx_strn(str, strlen(str)); } void mp_hal_stdout_tx_strn(const char *str, size_t len) { if (MP_STATE_PORT(pyb_stdio_uart) != NULL) { uart_tx_strn(MP_STATE_PORT(pyb_stdio_uart), str, len); } #if 0 && defined(USE_HOST_MODE) && MICROPY_HW_HAS_LCD lcd_print_strn(str, len); #endif if (usb_vcp_is_enabled()) { usb_vcp_send_strn(str, len); } } void mp_hal_stdout_tx_strn_cooked(const char *str, size_t len) { // send stdout to UART and USB CDC VCP if (MP_STATE_PORT(pyb_stdio_uart) != NULL) { uart_tx_strn_cooked(MP_STATE_PORT(pyb_stdio_uart), str, len); } if (usb_vcp_is_enabled()) { usb_vcp_send_strn_cooked(str, len); } } void mp_hal_gpio_clock_enable(GPIO_TypeDef *gpio) { if (0) { #ifdef __GPIOA_CLK_ENABLE } else if (gpio == GPIOA) { __GPIOA_CLK_ENABLE(); #endif #ifdef __GPIOB_CLK_ENABLE } else if (gpio == GPIOB) { __GPIOB_CLK_ENABLE(); #endif #ifdef __GPIOC_CLK_ENABLE } else if (gpio == GPIOC) { __GPIOC_CLK_ENABLE(); #endif #ifdef __GPIOD_CLK_ENABLE } else if (gpio == GPIOD) { __GPIOD_CLK_ENABLE(); #endif #ifdef __GPIOE_CLK_ENABLE } else if (gpio == GPIOE) { __GPIOE_CLK_ENABLE(); #endif #ifdef __GPIOF_CLK_ENABLE } else if (gpio == GPIOF) { __GPIOF_CLK_ENABLE(); #endif #ifdef __GPIOG_CLK_ENABLE } else if (gpio == GPIOG) { __GPIOG_CLK_ENABLE(); #endif #ifdef __GPIOH_CLK_ENABLE } else if (gpio == GPIOH) { __GPIOH_CLK_ENABLE(); #endif #ifdef __GPIOI_CLK_ENABLE } else if (gpio == GPIOI) { __GPIOI_CLK_ENABLE(); #endif #ifdef __GPIOJ_CLK_ENABLE } else if (gpio == GPIOJ) { __GPIOJ_CLK_ENABLE(); #endif #ifdef __GPIOK_CLK_ENABLE } else if (gpio == GPIOK) { __GPIOK_CLK_ENABLE(); #endif } } @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@