head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.48; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @/* * This file is part of the Micro Python project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2013, 2014 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include #include STM32_HAL_H #include "py/mpstate.h" #include "py/nlr.h" #include "py/obj.h" #include "py/gc.h" #include "py/builtin.h" #include "lib/utils/pyexec.h" #include "lib/fatfs/ff.h" #include "lib/fatfs/diskio.h" #include "gccollect.h" #include "irq.h" #include "systick.h" #include "led.h" #include "pin.h" #include "timer.h" #include "extint.h" #include "usrsw.h" #include "rng.h" #include "rtc.h" #include "i2c.h" #include "spi.h" #include "uart.h" #include "can.h" #include "adc.h" #include "storage.h" #include "sdcard.h" #include "accel.h" #include "servo.h" #include "dac.h" #include "lcd.h" #include "usb.h" #include "portmodules.h" #include "modmachine.h" /// \function millis() /// Returns the number of milliseconds since the board was last reset. /// /// The result is always a micropython smallint (31-bit signed number), so /// after 2^30 milliseconds (about 12.4 days) this will start to return /// negative numbers. STATIC mp_obj_t pyb_millis(void) { // We want to "cast" the 32 bit unsigned into a small-int. This means // copying the MSB down 1 bit (extending the sign down), which is // equivalent to just using the MP_OBJ_NEW_SMALL_INT macro. return MP_OBJ_NEW_SMALL_INT(HAL_GetTick()); } STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_millis_obj, pyb_millis); /// \function elapsed_millis(start) /// Returns the number of milliseconds which have elapsed since `start`. /// /// This function takes care of counter wrap, and always returns a positive /// number. This means it can be used to measure periods upto about 12.4 days. /// /// Example: /// start = pyb.millis() /// while pyb.elapsed_millis(start) < 1000: /// # Perform some operation STATIC mp_obj_t pyb_elapsed_millis(mp_obj_t start) { uint32_t startMillis = mp_obj_get_int(start); uint32_t currMillis = HAL_GetTick(); return MP_OBJ_NEW_SMALL_INT((currMillis - startMillis) & 0x3fffffff); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_elapsed_millis_obj, pyb_elapsed_millis); /// \function micros() /// Returns the number of microseconds since the board was last reset. /// /// The result is always a micropython smallint (31-bit signed number), so /// after 2^30 microseconds (about 17.8 minutes) this will start to return /// negative numbers. STATIC mp_obj_t pyb_micros(void) { // We want to "cast" the 32 bit unsigned into a small-int. This means // copying the MSB down 1 bit (extending the sign down), which is // equivalent to just using the MP_OBJ_NEW_SMALL_INT macro. return MP_OBJ_NEW_SMALL_INT(sys_tick_get_microseconds()); } STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_micros_obj, pyb_micros); /// \function elapsed_micros(start) /// Returns the number of microseconds which have elapsed since `start`. /// /// This function takes care of counter wrap, and always returns a positive /// number. This means it can be used to measure periods upto about 17.8 minutes. /// /// Example: /// start = pyb.micros() /// while pyb.elapsed_micros(start) < 1000: /// # Perform some operation STATIC mp_obj_t pyb_elapsed_micros(mp_obj_t start) { uint32_t startMicros = mp_obj_get_int(start); uint32_t currMicros = sys_tick_get_microseconds(); return MP_OBJ_NEW_SMALL_INT((currMicros - startMicros) & 0x3fffffff); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_elapsed_micros_obj, pyb_elapsed_micros); MP_DECLARE_CONST_FUN_OBJ(pyb_main_obj); // defined in main.c STATIC const mp_map_elem_t pyb_module_globals_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_pyb) }, { MP_OBJ_NEW_QSTR(MP_QSTR_bootloader), (mp_obj_t)&machine_bootloader_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_hard_reset), (mp_obj_t)&machine_reset_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_info), (mp_obj_t)&machine_info_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_unique_id), (mp_obj_t)&machine_unique_id_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_freq), (mp_obj_t)&machine_freq_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_repl_info), (mp_obj_t)&pyb_set_repl_info_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_wfi), (mp_obj_t)&pyb_wfi_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_disable_irq), (mp_obj_t)&pyb_disable_irq_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_enable_irq), (mp_obj_t)&pyb_enable_irq_obj }, #if IRQ_ENABLE_STATS { MP_OBJ_NEW_QSTR(MP_QSTR_irq_stats), (mp_obj_t)&pyb_irq_stats_obj }, #endif { MP_OBJ_NEW_QSTR(MP_QSTR_stop), (mp_obj_t)&machine_sleep_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_standby), (mp_obj_t)&machine_deepsleep_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_main), (mp_obj_t)&pyb_main_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_repl_uart), (mp_obj_t)&mod_os_dupterm_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_usb_mode), (mp_obj_t)&pyb_usb_mode_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_hid_mouse), (mp_obj_t)&pyb_usb_hid_mouse_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_hid_keyboard), (mp_obj_t)&pyb_usb_hid_keyboard_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_USB_VCP), (mp_obj_t)&pyb_usb_vcp_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_USB_HID), (mp_obj_t)&pyb_usb_hid_type }, // these 2 are deprecated; use USB_VCP.isconnected and USB_HID.send instead { MP_OBJ_NEW_QSTR(MP_QSTR_have_cdc), (mp_obj_t)&pyb_have_cdc_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_hid), (mp_obj_t)&pyb_hid_send_report_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_millis), (mp_obj_t)&pyb_millis_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_elapsed_millis), (mp_obj_t)&pyb_elapsed_millis_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_micros), (mp_obj_t)&pyb_micros_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_elapsed_micros), (mp_obj_t)&pyb_elapsed_micros_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_delay), (mp_obj_t)&time_sleep_ms_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_udelay), (mp_obj_t)&time_sleep_us_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_sync), (mp_obj_t)&mod_os_sync_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_mount), (mp_obj_t)&pyb_mount_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_Timer), (mp_obj_t)&pyb_timer_type }, #if MICROPY_HW_ENABLE_RNG { MP_OBJ_NEW_QSTR(MP_QSTR_rng), (mp_obj_t)&pyb_rng_get_obj }, #endif #if MICROPY_HW_ENABLE_RTC { MP_OBJ_NEW_QSTR(MP_QSTR_RTC), (mp_obj_t)&pyb_rtc_type }, #endif { MP_OBJ_NEW_QSTR(MP_QSTR_Pin), (mp_obj_t)&pin_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_ExtInt), (mp_obj_t)&extint_type }, #if MICROPY_HW_ENABLE_SERVO { MP_OBJ_NEW_QSTR(MP_QSTR_pwm), (mp_obj_t)&pyb_pwm_set_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_servo), (mp_obj_t)&pyb_servo_set_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_Servo), (mp_obj_t)&pyb_servo_type }, #endif #if MICROPY_HW_HAS_SWITCH { MP_OBJ_NEW_QSTR(MP_QSTR_Switch), (mp_obj_t)&pyb_switch_type }, #endif #if MICROPY_HW_HAS_SDCARD { MP_OBJ_NEW_QSTR(MP_QSTR_SD), (mp_obj_t)&pyb_sdcard_obj }, #endif #if defined(MICROPY_HW_LED1) { MP_OBJ_NEW_QSTR(MP_QSTR_LED), (mp_obj_t)&pyb_led_type }, #endif { MP_OBJ_NEW_QSTR(MP_QSTR_I2C), (mp_obj_t)&pyb_i2c_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_SPI), (mp_obj_t)&pyb_spi_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_UART), (mp_obj_t)&pyb_uart_type }, #if MICROPY_HW_ENABLE_CAN { MP_OBJ_NEW_QSTR(MP_QSTR_CAN), (mp_obj_t)&pyb_can_type }, #endif { MP_OBJ_NEW_QSTR(MP_QSTR_ADC), (mp_obj_t)&pyb_adc_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_ADCAll), (mp_obj_t)&pyb_adc_all_type }, #if MICROPY_HW_ENABLE_DAC { MP_OBJ_NEW_QSTR(MP_QSTR_DAC), (mp_obj_t)&pyb_dac_type }, #endif #if MICROPY_HW_HAS_MMA7660 { MP_OBJ_NEW_QSTR(MP_QSTR_Accel), (mp_obj_t)&pyb_accel_type }, #endif #if MICROPY_HW_HAS_LCD { MP_OBJ_NEW_QSTR(MP_QSTR_LCD), (mp_obj_t)&pyb_lcd_type }, #endif }; STATIC MP_DEFINE_CONST_DICT(pyb_module_globals, pyb_module_globals_table); const mp_obj_module_t pyb_module = { .base = { &mp_type_module }, .name = MP_QSTR_pyb, .globals = (mp_obj_dict_t*)&pyb_module_globals, }; @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@