head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.46; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.50; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @/* * This file is part of the Micro Python project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2013, 2014 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include STM32_HAL_H #include "flash.h" #include "mpconfigport.h" #include "py/misc.h" #if defined(MCU_SERIES_F7) // FLASH_FLAG_PGSERR (Programming Sequence Error) was renamed to // FLASH_FLAG_ERSERR (Erasing Sequence Error) in STM32F7 #define FLASH_FLAG_PGSERR FLASH_FLAG_ERSERR /* Base address of the Flash sectors */ #define ADDR_FLASH_SECTOR_0 ((uint32_t)0x08000000) /* Base @@ of Sector 0, 32 Kbytes */ #define ADDR_FLASH_SECTOR_1 ((uint32_t)0x08008000) /* Base @@ of Sector 1, 32 Kbytes */ #define ADDR_FLASH_SECTOR_2 ((uint32_t)0x08010000) /* Base @@ of Sector 2, 32 Kbytes */ #define ADDR_FLASH_SECTOR_3 ((uint32_t)0x08018000) /* Base @@ of Sector 3, 32 Kbytes */ #define ADDR_FLASH_SECTOR_4 ((uint32_t)0x08020000) /* Base @@ of Sector 4, 128 Kbytes */ #define ADDR_FLASH_SECTOR_5 ((uint32_t)0x08040000) /* Base @@ of Sector 5, 256 Kbytes */ #define ADDR_FLASH_SECTOR_6 ((uint32_t)0x08080000) /* Base @@ of Sector 6, 256 Kbytes */ #define ADDR_FLASH_SECTOR_7 ((uint32_t)0x080C0000) /* Base @@ of Sector 7, 256 Kbytes */ #define ADDR_FLASH_END ((uint32_t)0x08100000) /* 1 Mbytes total */ #else /* Base address of the Flash sectors */ #define ADDR_FLASH_SECTOR_0 ((uint32_t)0x08000000) /* Base @@ of Sector 0, 16 Kbytes */ #define ADDR_FLASH_SECTOR_1 ((uint32_t)0x08004000) /* Base @@ of Sector 1, 16 Kbytes */ #define ADDR_FLASH_SECTOR_2 ((uint32_t)0x08008000) /* Base @@ of Sector 2, 16 Kbytes */ #define ADDR_FLASH_SECTOR_3 ((uint32_t)0x0800C000) /* Base @@ of Sector 3, 16 Kbytes */ #define ADDR_FLASH_SECTOR_4 ((uint32_t)0x08010000) /* Base @@ of Sector 4, 64 Kbytes */ #define ADDR_FLASH_SECTOR_5 ((uint32_t)0x08020000) /* Base @@ of Sector 5, 128 Kbytes */ #define ADDR_FLASH_SECTOR_6 ((uint32_t)0x08040000) /* Base @@ of Sector 6, 128 Kbytes */ #define ADDR_FLASH_SECTOR_7 ((uint32_t)0x08060000) /* Base @@ of Sector 7, 128 Kbytes */ #if !defined(FLASH_SECTOR_8) #define ADDR_FLASH_END ((uint32_t)0x08080000) /* 512 Kbytes total */ #else #define ADDR_FLASH_SECTOR_8 ((uint32_t)0x08080000) /* Base @@ of Sector 8, 128 Kbytes */ #define ADDR_FLASH_SECTOR_9 ((uint32_t)0x080A0000) /* Base @@ of Sector 9, 128 Kbytes */ #define ADDR_FLASH_SECTOR_10 ((uint32_t)0x080C0000) /* Base @@ of Sector 10, 128 Kbytes */ #define ADDR_FLASH_SECTOR_11 ((uint32_t)0x080E0000) /* Base @@ of Sector 11, 128 Kbytes */ #if !defined(FLASH_SECTOR_12) #define ADDR_FLASH_END ((uint32_t)0x08100000) /* 1 Mbytes total */ #else #define ADDR_FLASH_SECTOR_12 ((uint32_t)0x08100000) /* Base @@ of Sector 12, 16 Kbytes */ #define ADDR_FLASH_SECTOR_13 ((uint32_t)0x08104000) /* Base @@ of Sector 13, 16 Kbytes */ #define ADDR_FLASH_SECTOR_14 ((uint32_t)0x08108000) /* Base @@ of Sector 14, 16 Kbytes */ #define ADDR_FLASH_SECTOR_15 ((uint32_t)0x0810C000) /* Base @@ of Sector 15, 16 Kbytes */ #define ADDR_FLASH_SECTOR_16 ((uint32_t)0x08110000) /* Base @@ of Sector 16, 64 Kbytes */ #define ADDR_FLASH_SECTOR_17 ((uint32_t)0x08120000) /* Base @@ of Sector 17, 128 Kbytes */ #define ADDR_FLASH_SECTOR_18 ((uint32_t)0x08140000) /* Base @@ of Sector 18, 128 Kbytes */ #define ADDR_FLASH_SECTOR_19 ((uint32_t)0x08160000) /* Base @@ of Sector 19, 128 Kbytes */ #define ADDR_FLASH_SECTOR_20 ((uint32_t)0x08180000) /* Base @@ of Sector 20, 128 Kbytes */ #define ADDR_FLASH_SECTOR_21 ((uint32_t)0x081A0000) /* Base @@ of Sector 21, 128 Kbytes */ #define ADDR_FLASH_SECTOR_22 ((uint32_t)0x081C0000) /* Base @@ of Sector 22, 128 Kbytes */ #define ADDR_FLASH_SECTOR_23 ((uint32_t)0x081E0000) /* Base @@ of Sector 23, 128 Kbytes */ #define ADDR_FLASH_END ((uint32_t)0x08200000) /* 2 Mbytes total */ #endif #endif #endif // MCU_SERIES_F7 static const uint32_t flash_info_table[] = { ADDR_FLASH_SECTOR_0, FLASH_SECTOR_0, ADDR_FLASH_SECTOR_1, FLASH_SECTOR_1, ADDR_FLASH_SECTOR_2, FLASH_SECTOR_2, ADDR_FLASH_SECTOR_3, FLASH_SECTOR_3, ADDR_FLASH_SECTOR_4, FLASH_SECTOR_4, ADDR_FLASH_SECTOR_5, FLASH_SECTOR_5, ADDR_FLASH_SECTOR_6, FLASH_SECTOR_6, ADDR_FLASH_SECTOR_7, FLASH_SECTOR_7, #if defined(FLASH_SECTOR_8) ADDR_FLASH_SECTOR_8, FLASH_SECTOR_8, ADDR_FLASH_SECTOR_9, FLASH_SECTOR_9, ADDR_FLASH_SECTOR_10, FLASH_SECTOR_10, ADDR_FLASH_SECTOR_11, FLASH_SECTOR_11, #endif #if defined(FLASH_SECTOR_12) ADDR_FLASH_SECTOR_12, FLASH_SECTOR_12, ADDR_FLASH_SECTOR_13, FLASH_SECTOR_13, ADDR_FLASH_SECTOR_14, FLASH_SECTOR_14, ADDR_FLASH_SECTOR_15, FLASH_SECTOR_15, ADDR_FLASH_SECTOR_16, FLASH_SECTOR_16, ADDR_FLASH_SECTOR_17, FLASH_SECTOR_17, ADDR_FLASH_SECTOR_18, FLASH_SECTOR_18, ADDR_FLASH_SECTOR_19, FLASH_SECTOR_19, ADDR_FLASH_SECTOR_20, FLASH_SECTOR_20, ADDR_FLASH_SECTOR_21, FLASH_SECTOR_21, ADDR_FLASH_SECTOR_22, FLASH_SECTOR_22, ADDR_FLASH_SECTOR_23, FLASH_SECTOR_23, #endif ADDR_FLASH_END, 0, }; uint32_t flash_get_sector_info(uint32_t addr, uint32_t *start_addr, uint32_t *size) { if (addr >= flash_info_table[0]) { for (int i = 0; i < MP_ARRAY_SIZE(flash_info_table) - 2; i += 2) { if (addr < flash_info_table[i + 2]) { if (start_addr != NULL) { *start_addr = flash_info_table[i]; } if (size != NULL) { *size = flash_info_table[i + 2] - flash_info_table[i]; } return flash_info_table[i + 1]; } } } return 0; } void flash_erase(uint32_t flash_dest, const uint32_t *src, uint32_t num_word32) { // check there is something to write if (num_word32 == 0) { return; } // unlock HAL_FLASH_Unlock(); // Clear pending flags (if any) __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); // erase the sector(s) FLASH_EraseInitTypeDef EraseInitStruct; EraseInitStruct.TypeErase = TYPEERASE_SECTORS; EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3; // voltage range needs to be 2.7V to 3.6V EraseInitStruct.Sector = flash_get_sector_info(flash_dest, NULL, NULL); EraseInitStruct.NbSectors = flash_get_sector_info(flash_dest + 4 * num_word32 - 1, NULL, NULL) - EraseInitStruct.Sector + 1; uint32_t SectorError = 0; if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) { // error occurred during sector erase HAL_FLASH_Lock(); // lock the flash return; } } /* // erase the sector using an interrupt void flash_erase_it(uint32_t flash_dest, const uint32_t *src, uint32_t num_word32) { // check there is something to write if (num_word32 == 0) { return; } // unlock HAL_FLASH_Unlock(); // Clear pending flags (if any) __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR); // erase the sector(s) FLASH_EraseInitTypeDef EraseInitStruct; EraseInitStruct.TypeErase = TYPEERASE_SECTORS; EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3; // voltage range needs to be 2.7V to 3.6V EraseInitStruct.Sector = flash_get_sector_info(flash_dest, NULL, NULL); EraseInitStruct.NbSectors = flash_get_sector_info(flash_dest + 4 * num_word32 - 1, NULL, NULL) - EraseInitStruct.Sector + 1; if (HAL_FLASHEx_Erase_IT(&EraseInitStruct) != HAL_OK) { // error occurred during sector erase HAL_FLASH_Lock(); // lock the flash return; } } */ void flash_write(uint32_t flash_dest, const uint32_t *src, uint32_t num_word32) { // program the flash word by word for (int i = 0; i < num_word32; i++) { if (HAL_FLASH_Program(TYPEPROGRAM_WORD, flash_dest, *src) != HAL_OK) { // error occurred during flash write HAL_FLASH_Lock(); // lock the flash return; } flash_dest += 4; src += 1; } // lock the flash HAL_FLASH_Lock(); } /* use erase, then write void flash_erase_and_write(uint32_t flash_dest, const uint32_t *src, uint32_t num_word32) { // check there is something to write if (num_word32 == 0) { return; } // unlock HAL_FLASH_Unlock(); // Clear pending flags (if any) __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR); // erase the sector(s) FLASH_EraseInitTypeDef EraseInitStruct; EraseInitStruct.TypeErase = TYPEERASE_SECTORS; EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3; // voltage range needs to be 2.7V to 3.6V EraseInitStruct.Sector = flash_get_sector_info(flash_dest, NULL, NULL); EraseInitStruct.NbSectors = flash_get_sector_info(flash_dest + 4 * num_word32 - 1, NULL, NULL) - EraseInitStruct.Sector + 1; uint32_t SectorError = 0; if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) { // error occurred during sector erase HAL_FLASH_Lock(); // lock the flash return; } // program the flash word by word for (int i = 0; i < num_word32; i++) { if (HAL_FLASH_Program(TYPEPROGRAM_WORD, flash_dest, *src) != HAL_OK) { // error occurred during flash write HAL_FLASH_Lock(); // lock the flash return; } flash_dest += 4; src += 1; } // lock the flash HAL_FLASH_Lock(); } */ @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@