head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.27; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @/*-----------------------------------------------------------------------/ / Low level disk interface modlue include file (C)ChaN, 2014 / /-----------------------------------------------------------------------*/ #ifndef _DISKIO_DEFINED #define _DISKIO_DEFINED #ifdef __cplusplus extern "C" { #endif #define _USE_WRITE 1 /* 1: Enable disk_write function */ #define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */ #include "integer.h" /* Status of Disk Functions */ typedef BYTE DSTATUS; /* Results of Disk Functions */ typedef enum { RES_OK = 0, /* 0: Successful */ RES_ERROR, /* 1: R/W Error */ RES_WRPRT, /* 2: Write Protected */ RES_NOTRDY, /* 3: Not Ready */ RES_PARERR /* 4: Invalid Parameter */ } DRESULT; /*---------------------------------------*/ /* Prototypes for disk control functions */ DSTATUS disk_initialize (BYTE pdrv); DSTATUS disk_status (BYTE pdrv); DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count); DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff); /* Definitions of physical drive number for each media */ #define PD_FLASH (0) /* Map FLASH drive to drive number 0 */ #define PD_SDCARD (1) /* Map SDCARD drive to drive number 1 */ #define PD_USER (2) /* Map USER mounts to drive number 2 */ /* Disk Status Bits (DSTATUS) */ #define STA_NOINIT 0x01 /* Drive not initialized */ #define STA_NODISK 0x02 /* No medium in the drive */ #define STA_PROTECT 0x04 /* Write protected */ /* Command code for disk_ioctrl fucntion */ /* Generic command (Used by FatFs) */ #define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ #define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ #define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ #define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ #define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ /* Generic command (Not used by FatFs) */ #define CTRL_POWER 5 /* Get/Set power status */ #define CTRL_LOCK 6 /* Lock/Unlock media removal */ #define CTRL_EJECT 7 /* Eject media */ #define CTRL_FORMAT 8 /* Create physical format on the media */ /* MMC/SDC specific ioctl command */ #define MMC_GET_TYPE 10 /* Get card type */ #define MMC_GET_CSD 11 /* Get CSD */ #define MMC_GET_CID 12 /* Get CID */ #define MMC_GET_OCR 13 /* Get OCR */ #define MMC_GET_SDSTAT 14 /* Get SD status */ /* ATA/CF specific ioctl command */ #define ATA_GET_REV 20 /* Get F/W revision */ #define ATA_GET_MODEL 21 /* Get model name */ #define ATA_GET_SN 22 /* Get serial number */ #ifdef __cplusplus } #endif #endif @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@