head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.23; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @//Generated at 2012-07-03 18:44:06 /* * Copyright (c) 2010 - 2011 Espressif System * */ #ifndef UART_REGISTER_H_INCLUDED #define UART_REGISTER_H_INCLUDED #define REG_UART_BASE( i ) (0x60000000+(i)*0xf00) //version value:32'h062000 #define UART_FIFO( i ) (REG_UART_BASE( i ) + 0x0) #define UART_RXFIFO_RD_BYTE 0x000000FF #define UART_RXFIFO_RD_BYTE_S 0 #define UART_INT_RAW( i ) (REG_UART_BASE( i ) + 0x4) #define UART_RXFIFO_TOUT_INT_RAW (BIT(8)) #define UART_BRK_DET_INT_RAW (BIT(7)) #define UART_CTS_CHG_INT_RAW (BIT(6)) #define UART_DSR_CHG_INT_RAW (BIT(5)) #define UART_RXFIFO_OVF_INT_RAW (BIT(4)) #define UART_FRM_ERR_INT_RAW (BIT(3)) #define UART_PARITY_ERR_INT_RAW (BIT(2)) #define UART_TXFIFO_EMPTY_INT_RAW (BIT(1)) #define UART_RXFIFO_FULL_INT_RAW (BIT(0)) #define UART_INT_ST( i ) (REG_UART_BASE( i ) + 0x8) #define UART_RXFIFO_TOUT_INT_ST (BIT(8)) #define UART_BRK_DET_INT_ST (BIT(7)) #define UART_CTS_CHG_INT_ST (BIT(6)) #define UART_DSR_CHG_INT_ST (BIT(5)) #define UART_RXFIFO_OVF_INT_ST (BIT(4)) #define UART_FRM_ERR_INT_ST (BIT(3)) #define UART_PARITY_ERR_INT_ST (BIT(2)) #define UART_TXFIFO_EMPTY_INT_ST (BIT(1)) #define UART_RXFIFO_FULL_INT_ST (BIT(0)) #define UART_INT_ENA( i ) (REG_UART_BASE( i ) + 0xC) #define UART_RXFIFO_TOUT_INT_ENA (BIT(8)) #define UART_BRK_DET_INT_ENA (BIT(7)) #define UART_CTS_CHG_INT_ENA (BIT(6)) #define UART_DSR_CHG_INT_ENA (BIT(5)) #define UART_RXFIFO_OVF_INT_ENA (BIT(4)) #define UART_FRM_ERR_INT_ENA (BIT(3)) #define UART_PARITY_ERR_INT_ENA (BIT(2)) #define UART_TXFIFO_EMPTY_INT_ENA (BIT(1)) #define UART_RXFIFO_FULL_INT_ENA (BIT(0)) #define UART_INT_CLR( i ) (REG_UART_BASE( i ) + 0x10) #define UART_RXFIFO_TOUT_INT_CLR (BIT(8)) #define UART_BRK_DET_INT_CLR (BIT(7)) #define UART_CTS_CHG_INT_CLR (BIT(6)) #define UART_DSR_CHG_INT_CLR (BIT(5)) #define UART_RXFIFO_OVF_INT_CLR (BIT(4)) #define UART_FRM_ERR_INT_CLR (BIT(3)) #define UART_PARITY_ERR_INT_CLR (BIT(2)) #define UART_TXFIFO_EMPTY_INT_CLR (BIT(1)) #define UART_RXFIFO_FULL_INT_CLR (BIT(0)) #define UART_CLKDIV( i ) (REG_UART_BASE( i ) + 0x14) #define UART_CLKDIV_CNT 0x000FFFFF #define UART_CLKDIV_S 0 #define UART_AUTOBAUD( i ) (REG_UART_BASE( i ) + 0x18) #define UART_GLITCH_FILT 0x000000FF #define UART_GLITCH_FILT_S 8 #define UART_AUTOBAUD_EN (BIT(0)) #define UART_STATUS( i ) (REG_UART_BASE( i ) + 0x1C) #define UART_TXD (BIT(31)) #define UART_RTSN (BIT(30)) #define UART_DTRN (BIT(29)) #define UART_TXFIFO_CNT 0x000000FF #define UART_TXFIFO_CNT_S 16 #define UART_RXD (BIT(15)) #define UART_CTSN (BIT(14)) #define UART_DSRN (BIT(13)) #define UART_RXFIFO_CNT 0x000000FF #define UART_RXFIFO_CNT_S 0 #define UART_CONF0( i ) (REG_UART_BASE( i ) + 0x20) #define UART_TXFIFO_RST (BIT(18)) #define UART_RXFIFO_RST (BIT(17)) #define UART_IRDA_EN (BIT(16)) #define UART_TX_FLOW_EN (BIT(15)) #define UART_LOOPBACK (BIT(14)) #define UART_IRDA_RX_INV (BIT(13)) #define UART_IRDA_TX_INV (BIT(12)) #define UART_IRDA_WCTL (BIT(11)) #define UART_IRDA_TX_EN (BIT(10)) #define UART_IRDA_DPLX (BIT(9)) #define UART_TXD_BRK (BIT(8)) #define UART_SW_DTR (BIT(7)) #define UART_SW_RTS (BIT(6)) #define UART_STOP_BIT_NUM 0x00000003 #define UART_STOP_BIT_NUM_S 4 #define UART_BIT_NUM 0x00000003 #define UART_BIT_NUM_S 2 #define UART_PARITY_EN (BIT(1)) #define UART_PARITY (BIT(0)) #define UART_CONF1( i ) (REG_UART_BASE( i ) + 0x24) #define UART_RX_TOUT_EN (BIT(31)) #define UART_RX_TOUT_THRHD 0x0000007F #define UART_RX_TOUT_THRHD_S 24 #define UART_RX_FLOW_EN (BIT(23)) #define UART_RX_FLOW_THRHD 0x0000007F #define UART_RX_FLOW_THRHD_S 16 #define UART_TXFIFO_EMPTY_THRHD 0x0000007F #define UART_TXFIFO_EMPTY_THRHD_S 8 #define UART_RXFIFO_FULL_THRHD 0x0000007F #define UART_RXFIFO_FULL_THRHD_S 0 #define UART_LOWPULSE( i ) (REG_UART_BASE( i ) + 0x28) #define UART_LOWPULSE_MIN_CNT 0x000FFFFF #define UART_LOWPULSE_MIN_CNT_S 0 #define UART_HIGHPULSE( i ) (REG_UART_BASE( i ) + 0x2C) #define UART_HIGHPULSE_MIN_CNT 0x000FFFFF #define UART_HIGHPULSE_MIN_CNT_S 0 #define UART_PULSE_NUM( i ) (REG_UART_BASE( i ) + 0x30) #define UART_PULSE_NUM_CNT 0x0003FF #define UART_PULSE_NUM_CNT_S 0 #define UART_DATE( i ) (REG_UART_BASE( i ) + 0x78) #define UART_ID( i ) (REG_UART_BASE( i ) + 0x7C) #endif // UART_REGISTER_H_INCLUDED @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@