head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.28.22; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @#ifndef _INCLUDED_UART_H_ #define _INCLUDED_UART_H_ #define UART0 (0) #define UART1 (1) typedef enum { UART_FIVE_BITS = 0x0, UART_SIX_BITS = 0x1, UART_SEVEN_BITS = 0x2, UART_EIGHT_BITS = 0x3 } UartBitsNum4Char; typedef enum { UART_ONE_STOP_BIT = 0, UART_ONE_HALF_STOP_BIT = BIT2, UART_TWO_STOP_BIT = BIT2 } UartStopBitsNum; typedef enum { UART_NONE_BITS = 0, UART_ODD_BITS = 0, UART_EVEN_BITS = BIT4 } UartParityMode; typedef enum { UART_STICK_PARITY_DIS = 0, UART_STICK_PARITY_EN = BIT3 | BIT5 } UartExistParity; typedef enum { UART_BIT_RATE_9600 = 9600, UART_BIT_RATE_19200 = 19200, UART_BIT_RATE_38400 = 38400, UART_BIT_RATE_57600 = 57600, UART_BIT_RATE_74880 = 74880, UART_BIT_RATE_115200 = 115200, UART_BIT_RATE_230400 = 230400, UART_BIT_RATE_256000 = 256000, UART_BIT_RATE_460800 = 460800, UART_BIT_RATE_921600 = 921600 } UartBautRate; typedef enum { UART_NONE_CTRL, UART_HARDWARE_CTRL, UART_XON_XOFF_CTRL } UartFlowCtrl; typedef enum { UART_EMPTY, UART_UNDER_WRITE, UART_WRITE_OVER } RcvMsgBuffState; typedef struct { uint32 RcvBuffSize; uint8 *pRcvMsgBuff; uint8 *pWritePos; uint8 *pReadPos; uint8 TrigLvl; //JLU: may need to pad RcvMsgBuffState BuffState; } RcvMsgBuff; typedef struct { uint32 TrxBuffSize; uint8 *pTrxBuff; } TrxMsgBuff; typedef enum { UART_BAUD_RATE_DET, UART_WAIT_SYNC_FRM, UART_SRCH_MSG_HEAD, UART_RCV_MSG_BODY, UART_RCV_ESC_CHAR, } RcvMsgState; typedef struct { UartBautRate baut_rate; UartBitsNum4Char data_bits; UartExistParity exist_parity; UartParityMode parity; // chip size in byte UartStopBitsNum stop_bits; UartFlowCtrl flow_ctrl; RcvMsgBuff rcv_buff; TrxMsgBuff trx_buff; RcvMsgState rcv_state; int received; int buff_uart_no; //indicate which uart use tx/rx buffer } UartDevice; void uart_init(UartBautRate uart0_br, UartBautRate uart1_br); int uart0_rx(void); void uart_tx_one_char(uint8 uart, uint8 TxChar); #endif // _INCLUDED_UART_H_ @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@