head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @# @; 1.2 date 2026.10.15.05.28.08; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @:mod:`esp` --- functions related to the ESP8266 =============================================== .. module:: esp :synopsis: functions related to the ESP8266 The ``esp`` module contains specific functions related to the ESP8266 module. Functions --------- .. function:: mac([address]) Get or set the network interface's MAC address. If the ``address`` parameter is provided, sets the address to its value. If the function is called wihout parameters, returns the current address. .. function:: getaddrinfo((hostname, port, lambda)) Initiate resolving of the given hostname. When the hostname is resolved, the provided ``lambda`` callback will be called with two arguments, first being the hostname being resolved, second a tuple with information about that hostname. .. function:: wifi_mode([mode]) Get or set the wireless network operating mode. If the ``mode`` parameter is provided, sets the mode to its value. If the function is called wihout parameters, returns the current mode. The possible modes are defined as constants: * ``STA_MODE`` -- station mode, * ``AP_MODE`` -- software access point mode, * ``STA_AP_MODE`` -- mixed station and software access point mode. .. function:: phy_mode([mode]) Get or set the network interface mode. If the ``mode`` parameter is provided, sets the mode to its value. If the function is called wihout parameters, returns the current mode. The possible modes are defined as constants: * ``MODE_11B`` -- IEEE 802.11b, * ``MODE_11G`` -- IEEE 802.11g, * ``MODE_11N`` -- IEEE 802.11n. .. function:: sleep_type([sleep_type]) Get or set the sleep type. If the ``sleep_type`` parameter is provided, sets the sleep type to its value. If the function is called wihout parameters, returns the current sleep type. The possible sleep types are defined as constants: * ``SLEEP_NONE`` -- all functions enabled, * ``SLEEP_MODEM`` -- modem sleep, shuts down the WiFi Modem circuit. * ``SLEEP_LIGHT`` -- light sleep, shuts down the WiFi Modem circuit and suspends the processor periodically. The system enters the set sleep mode automatically when possible. .. function:: deepsleep(time=0) Enter deep sleep. The whole module powers down, except for the RTC clock circuit, which can be used to restart the module after the specified time if the pin 16 is connected to the reset pin. Otherwise the module will sleep until manually reset. .. function:: flash_id() Read the device ID of the flash memory. Classes ------- .. toctree:: :maxdepth: 1 esp.socket.rst @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@