head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.27.58; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @//***************************************************************************** // // shamd5.h // // Defines and Macros for the SHA/MD5. // // Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ // // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #ifndef __DRIVERLIB_SHAMD5_H__ #define __DRIVERLIB_SHAMD5_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // The following defines are used to specify the algorithm in use in the // SHA/MD5 module. // //***************************************************************************** #define SHAMD5_ALGO_MD5 0x00000018 // MD5 #define SHAMD5_ALGO_SHA1 0x0000001a // SHA-1 #define SHAMD5_ALGO_SHA224 0x0000001c // SHA-224 #define SHAMD5_ALGO_SHA256 0x0000001e // SHA-256 #define SHAMD5_ALGO_HMAC_MD5 0x00000000 // HMAC-MD5 #define SHAMD5_ALGO_HMAC_SHA1 0x00000002 // HMAC-SHA-1 #define SHAMD5_ALGO_HMAC_SHA224 0x00000004 // HMAC-SHA-224 #define SHAMD5_ALGO_HMAC_SHA256 0x00000006 // HMAC-SHA-256 //***************************************************************************** // // The following defines are used to represent the different interrupt sources // in SHAMD5IntEnable(), SHAMD5IntDisable(), SHAMD5GetIntStatus(), and // SHAMD5BlockOnIntStatus() functions. // //***************************************************************************** #define SHAMD5_INT_CONTEXT_READY 0x00000008 #define SHAMD5_INT_PARTHASH_READY 0x00000004 #define SHAMD5_INT_INPUT_READY 0x00000002 #define SHAMD5_INT_OUTPUT_READY 0x00000001 #define SHAMD5_INT_DMA_CONTEXT_IN 0x00010000 #define SHAMD5_INT_DMA_DATA_IN 0x00020000 #define SHAMD5_INT_DMA_CONTEXT_OUT 0x00040000 //***************************************************************************** // // Function prototypes // //***************************************************************************** extern void SHAMD5ConfigSet(uint32_t ui32Base, uint32_t ui32Mode); extern bool SHAMD5DataProcess(uint32_t ui32Base, uint8_t *pui8DataSrc, uint32_t ui32DataLength, uint8_t *pui8HashResult); extern void SHAMD5DataWrite(uint32_t ui32Base, uint8_t *pui8Src); extern void SHAMD5DataWriteMultiple(uint8_t *pui8DataSrc, uint32_t ui32DataLength); extern bool SHAMD5DataWriteNonBlocking(uint32_t ui32Base, uint8_t *pui8Src); extern void SHAMD5DMADisable(uint32_t ui32Base); extern void SHAMD5DMAEnable(uint32_t ui32Base); extern void SHAMD5DataLengthSet(uint32_t ui32Base, uint32_t ui32Length); extern void SHAMD5HMACKeySet(uint32_t ui32Base, uint8_t *pui8Src); extern void SHAMD5HMACPPKeyGenerate(uint32_t ui32Base, uint8_t *pui8Key, uint8_t *pui8PPKey); extern void SHAMD5HMACPPKeySet(uint32_t ui32Base, uint8_t *pui8Src); extern bool SHAMD5HMACProcess(uint32_t ui32Base, uint8_t *pui8DataSrc, uint32_t ui32DataLength, uint8_t *pui8HashResult); extern void SHAMD5IntClear(uint32_t ui32Base, uint32_t ui32IntFlags); extern void SHAMD5IntDisable(uint32_t ui32Base, uint32_t ui32IntFlags); extern void SHAMD5IntEnable(uint32_t ui32Base, uint32_t ui32IntFlags); extern void SHAMD5IntRegister(uint32_t ui32Base, void(*pfnHandler)(void)); extern uint32_t SHAMD5IntStatus(uint32_t ui32Base, bool bMasked); extern void SHAMD5IntUnregister(uint32_t ui32Base); extern void SHAMD5ResultRead(uint32_t ui32Base, uint8_t *pui8Dest); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __DRIVERLIB_SHAMD5_H__ @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@