head 1.2; access; symbols micropython-1-5-2-base:1.1.1.1 MICROPYTHON:1.1.1; locks; strict; comment @ * @; 1.2 date 2026.10.15.05.27.57; author agc; state dead; branches; next 1.1; commitid aHLdC1EGCUYk7xZG; 1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches 1.1.1.1; next ; commitid Q8liT0v6zMF95QQy; 1.1.1.1 date 2016.01.14.01.38.49; author agc; state Exp; branches; next ; commitid Q8liT0v6zMF95QQy; desc @@ 1.2 log @Remove waaaay old micropython sources which haven't been relevant for 10 years @ text @//***************************************************************************** // // i2s.h // // Defines and Macros for the I2S. // // Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ // // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #ifndef __I2S_H__ #define __I2S_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // I2S DMA ports. // //***************************************************************************** #define I2S_TX_DMA_PORT 0x4401E200 #define I2S_RX_DMA_PORT 0x4401E280 //***************************************************************************** // // Values that can be passed to I2SConfigSetExpClk() as the ulConfig parameter. // //***************************************************************************** #define I2S_SLOT_SIZE_8 0x00300032 #define I2S_SLOT_SIZE_16 0x00700074 #define I2S_SLOT_SIZE_24 0x00B000B6 #define I2S_PORT_CPU 0x00080008 #define I2S_PORT_DMA 0x00000000 #define I2S_MODE_MASTER 0x00000000 #define I2S_MODE_SLAVE 0x00008000 //***************************************************************************** // // Values that can be passed as ulDataLine parameter. // //***************************************************************************** #define I2S_DATA_LINE_0 0x00000001 #define I2S_DATA_LINE_1 0x00000002 //***************************************************************************** // // Values that can be passed to I2SSerializerConfig() as the ulSerMode // parameter. // //***************************************************************************** #define I2S_SER_MODE_TX 0x00000001 #define I2S_SER_MODE_RX 0x00000002 #define I2S_SER_MODE_DISABLE 0x00000000 //***************************************************************************** // // Values that can be passed to I2SSerializerConfig() as the ulInActState // parameter. // //***************************************************************************** #define I2S_INACT_TRI_STATE 0x00000000 #define I2S_INACT_LOW_LEVEL 0x00000008 #define I2S_INACT_HIGH_LEVEL 0x0000000C //***************************************************************************** // // Values that can be passed to I2SIntEnable() and I2SIntDisable() as the // ulIntFlags parameter. // //***************************************************************************** #define I2S_INT_XUNDRN 0x00000001 #define I2S_INT_XSYNCERR 0x00000002 #define I2S_INT_XLAST 0x00000010 #define I2S_INT_XDATA 0x00000020 #define I2S_INT_XSTAFRM 0x00000080 #define I2S_INT_XDMA 0x80000000 #define I2S_INT_ROVRN 0x00010000 #define I2S_INT_RSYNCERR 0x00020000 #define I2S_INT_RLAST 0x00100000 #define I2S_INT_RDATA 0x00200000 #define I2S_INT_RSTAFRM 0x00800000 #define I2S_INT_RDMA 0x40000000 //***************************************************************************** // // Values that can be passed to I2SRxActiveSlotSet() and I2STxActiveSlotSet // //***************************************************************************** #define I2S_ACT_SLOT_EVEN 0x00000001 #define I2S_ACT_SLOT_ODD 0x00000002 //***************************************************************************** // // Values that can be passed to I2SIntClear() as the // ulIntFlags parameter and returned from I2SIntStatus(). // //***************************************************************************** #define I2S_STS_XERR 0x00000100 #define I2S_STS_XDMAERR 0x00000080 #define I2S_STS_XSTAFRM 0x00000040 #define I2S_STS_XDATA 0x00000020 #define I2S_STS_XLAST 0x00000010 #define I2S_STS_XSYNCERR 0x00000002 #define I2S_STS_XUNDRN 0x00000001 #define I2S_STS_XDMA 0x80000000 #define I2S_STS_RERR 0x01000000 #define I2S_STS_RDMAERR 0x00800000 #define I2S_STS_RSTAFRM 0x00400000 #define I2S_STS_RDATA 0x00200000 #define I2S_STS_RLAST 0x00100000 #define I2S_STS_RSYNCERR 0x00020000 #define I2S_STS_ROVERN 0x00010000 #define I2S_STS_RDMA 0x40000000 //***************************************************************************** // // Values that can be passed to I2SEnable() as the ulMode parameter. // //***************************************************************************** #define I2S_MODE_TX_ONLY 0x00000001 #define I2S_MODE_TX_RX_SYNC 0x00000003 //***************************************************************************** // // API Function prototypes // //***************************************************************************** extern void I2SEnable(unsigned long ulBase, unsigned long ulMode); extern void I2SDisable(unsigned long ulBase); extern void I2SDataPut(unsigned long ulBase, unsigned long ulDataLine, unsigned long ulData); extern long I2SDataPutNonBlocking(unsigned long ulBase, unsigned long ulDataLine, unsigned long ulData); extern void I2SDataGet(unsigned long ulBase, unsigned long ulDataLine, unsigned long *pulData); extern long I2SDataGetNonBlocking(unsigned long ulBase, unsigned long ulDataLine, unsigned long *pulData); extern void I2SConfigSetExpClk(unsigned long ulBase, unsigned long ulI2SClk, unsigned long ulBitClk, unsigned long ulConfig); extern void I2STxFIFOEnable(unsigned long ulBase, unsigned long ulTxLevel, unsigned long ulWordsPerTransfer); extern void I2STxFIFODisable(unsigned long ulBase); extern void I2SRxFIFOEnable(unsigned long ulBase, unsigned long ulRxLevel, unsigned long ulWordsPerTransfer); extern void I2SRxFIFODisable(unsigned long ulBase); extern unsigned long I2STxFIFOStatusGet(unsigned long ulBase); extern unsigned long I2SRxFIFOStatusGet(unsigned long ulBase); extern void I2SSerializerConfig(unsigned long ulBase, unsigned long ulDataLine, unsigned long ulSerMode, unsigned long ulInActState); extern void I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags); extern void I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags); extern unsigned long I2SIntStatus(unsigned long ulBase); extern void I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags); extern void I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); extern void I2SIntUnregister(unsigned long ulBase); extern void I2STxActiveSlotSet(unsigned long ulBase, unsigned long ulActSlot); extern void I2SRxActiveSlotSet(unsigned long ulBase, unsigned long ulActSlot); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif //__I2S_H__ @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import micropython version 1.5.2 into othersrc. Micropython is a python3 implementation that has been optimised for micro-controllers and small embedded systems. It also has a "unix" port. It has an MIT license. This is version 1.5.2 of micropython. MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc.). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct. Note that only subset of Python 3.4 functionality implemented for the data types and modules. This is the standard micropython source (version v1.5.2), which has been adapted to use reachover infrastructure. At the present time, libffi (from pkgsrc) is used. Alternative locations for libffi can be set using the PKGSRC_PREFIX definition to make. In the whole scheme of things, micropython is quite small: % size bin/micropython text data bss dec hex filename 393495 1624 2208 397327 6100f bin/micropython % and runs much as expected: % bin/micropython MicroPython v1.5.2 on 2016-01-13; linux version Use Ctrl-D to exit, Ctrl-E for paste mode >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> % python2.7 Python 2.7.10 (default, Oct 17 2015, 17:55:29) [GCC 4.8.5] on netbsd7 Type "help", "copyright", "credits" or "license" for more information. >>> print("hello world") hello world >>> list(5 * x + y for x in range(10) for y in [4, 2, 1]) [4, 2, 1, 9, 7, 6, 14, 12, 11, 19, 17, 16, 24, 22, 21, 29, 27, 26, 34, 32, 31, 39, 37, 36, 44, 42, 41, 49, 47, 46] >>> ^D % This (reachover) version runs all the tests which the gmake version does. % make t cd bin && make t cd /home/agc/local/micropython/bin/../dist/unix/../tests && env MICROPY_MICROPYTHON=/home/agc/local/micropython/bin/micropython ./run-tests pass basics/0prelim.py pass basics/andor.py pass basics/array1.py pass basics/array_add.py pass basics/array_construct.py pass basics/array_construct2.py ... pass unix/ffi_callback.py pass unix/ffi_float.py pass unix/ffi_float2.py 474 tests performed (15812 individual testcases) 474 tests passed 5 tests skipped: cmd_showbc cmd_verbose machine1 machine_mem extra_coverage % The sources are available from github: https://github.com/micropython/micropython micropython release at: https://github.com/micropython/micropython/releases Sources for 1.5.2 taken from: https://github.com/micropython/micropython/archive/v1.5.2.tar.gz Alistair Crooks agc@@netbsd.org Wed Jan 13 17:15:30 PST 2016 @ text @@