head 1.2; access; symbols perseant-exfatfs-base-20250801:1.2 perseant-exfatfs-base-20240630:1.2 cjep_sun2x:1.2.0.14 cjep_sun2x-base:1.2 cjep_staticlib_x-base1:1.2 cjep_staticlib_x:1.2.0.12 cjep_staticlib_x-base:1.2 phil-wifi-20200421:1.2 phil-wifi-20200411:1.2 phil-wifi-20200406:1.2 pgoyette-compat-merge-20190127:1.2 pgoyette-compat-20190127:1.2 pgoyette-compat-20190118:1.2 pgoyette-compat-1226:1.2 pgoyette-compat-1126:1.2 pgoyette-compat-1020:1.2 pgoyette-compat-0930:1.2 pgoyette-compat-0906:1.2 netbsd-7-2-RELEASE:1.1.1.4 pgoyette-compat-0728:1.2 pgoyette-compat-0625:1.2 pgoyette-compat-0521:1.2 pgoyette-compat-0502:1.2 pgoyette-compat-0422:1.2 pgoyette-compat-0415:1.2 pgoyette-compat-0407:1.2 pgoyette-compat-0330:1.2 pgoyette-compat-0322:1.2 pgoyette-compat-0315:1.2 netbsd-7-1-2-RELEASE:1.1.1.4 pgoyette-compat:1.2.0.10 pgoyette-compat-base:1.2 netbsd-7-1-1-RELEASE:1.1.1.4 perseant-stdc-iso10646:1.2.0.8 perseant-stdc-iso10646-base:1.2 prg-localcount2-base3:1.2 prg-localcount2-base2:1.2 prg-localcount2-base1:1.2 prg-localcount2:1.2.0.6 prg-localcount2-base:1.2 pgoyette-localcount-20170426:1.2 bouyer-socketcan-base1:1.2 pgoyette-localcount-20170320:1.2 netbsd-7-1:1.1.1.4.0.44 netbsd-7-1-RELEASE:1.1.1.4 netbsd-7-1-RC2:1.1.1.4 netbsd-7-nhusb-base-20170116:1.1.1.4 bouyer-socketcan:1.2.0.4 bouyer-socketcan-base:1.2 pgoyette-localcount-20170107:1.2 netbsd-7-1-RC1:1.1.1.4 pgoyette-localcount-20161104:1.2 netbsd-7-0-2-RELEASE:1.1.1.4 localcount-20160914:1.2 netbsd-7-nhusb:1.1.1.4.0.42 netbsd-7-nhusb-base:1.1.1.4 pgoyette-localcount-20160806:1.2 pgoyette-localcount-20160726:1.2 pgoyette-localcount:1.2.0.2 pgoyette-localcount-base:1.2 netbsd-7-0-1-RELEASE:1.1.1.4 netbsd-7-0:1.1.1.4.0.40 netbsd-7-0-RELEASE:1.1.1.4 netbsd-7-0-RC3:1.1.1.4 netbsd-7-0-RC2:1.1.1.4 netbsd-7-0-RC1:1.1.1.4 netbsd-5-2-3-RELEASE:1.1.1.4 netbsd-5-1-5-RELEASE:1.1.1.4 netbsd-6-0-6-RELEASE:1.1.1.4 netbsd-6-1-5-RELEASE:1.1.1.4 netbsd-7:1.1.1.4.0.38 netbsd-7-base:1.1.1.4 yamt-pagecache-base9:1.1.1.4 yamt-pagecache-tag8:1.1.1.4 netbsd-6-1-4-RELEASE:1.1.1.4 netbsd-6-0-5-RELEASE:1.1.1.4 tls-earlyentropy:1.1.1.4.0.36 tls-earlyentropy-base:1.1.1.4 riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.1.1.4 riastradh-drm2-base3:1.1.1.4 netbsd-6-1-3-RELEASE:1.1.1.4 netbsd-6-0-4-RELEASE:1.1.1.4 netbsd-5-2-2-RELEASE:1.1.1.4 netbsd-5-1-4-RELEASE:1.1.1.4 netbsd-6-1-2-RELEASE:1.1.1.4 netbsd-6-0-3-RELEASE:1.1.1.4 netbsd-5-2-1-RELEASE:1.1.1.4 netbsd-5-1-3-RELEASE:1.1.1.4 netbsd-6-1-1-RELEASE:1.1.1.4 riastradh-drm2-base2:1.1.1.4 riastradh-drm2-base1:1.1.1.4 riastradh-drm2:1.1.1.4.0.30 riastradh-drm2-base:1.1.1.4 netbsd-6-1:1.1.1.4.0.34 netbsd-6-0-2-RELEASE:1.1.1.4 netbsd-6-1-RELEASE:1.1.1.4 netbsd-6-1-RC4:1.1.1.4 netbsd-6-1-RC3:1.1.1.4 agc-symver:1.1.1.4.0.32 agc-symver-base:1.1.1.4 netbsd-6-1-RC2:1.1.1.4 netbsd-6-1-RC1:1.1.1.4 yamt-pagecache-base8:1.1.1.4 netbsd-5-2:1.1.1.4.0.28 netbsd-6-0-1-RELEASE:1.1.1.4 yamt-pagecache-base7:1.1.1.4 netbsd-5-2-RELEASE:1.1.1.4 netbsd-5-2-RC1:1.1.1.4 matt-nb6-plus-nbase:1.1.1.4 yamt-pagecache-base6:1.1.1.4 netbsd-6-0:1.1.1.4.0.26 netbsd-6-0-RELEASE:1.1.1.4 netbsd-6-0-RC2:1.1.1.4 tls-maxphys:1.1.1.4.0.24 tls-maxphys-base:1.1.1.4 matt-nb6-plus:1.1.1.4.0.22 matt-nb6-plus-base:1.1.1.4 netbsd-6-0-RC1:1.1.1.4 yamt-pagecache-base5:1.1.1.4 yamt-pagecache-base4:1.1.1.4 netbsd-6:1.1.1.4.0.20 netbsd-6-base:1.1.1.4 netbsd-5-1-2-RELEASE:1.1.1.4 netbsd-5-1-1-RELEASE:1.1.1.4 yamt-pagecache-base3:1.1.1.4 yamt-pagecache-base2:1.1.1.4 yamt-pagecache:1.1.1.4.0.2 yamt-pagecache-base:1.1.1.4 cherry-xenmp:1.1.1.4.0.18 cherry-xenmp-base:1.1.1.4 bouyer-quota2-nbase:1.1.1.4 bouyer-quota2:1.1.1.4.0.16 bouyer-quota2-base:1.1.1.4 matt-mips64-premerge-20101231:1.1.1.4 matt-nb5-mips64-premerge-20101231:1.1.1.4 matt-nb5-pq3:1.1.1.4.0.14 matt-nb5-pq3-base:1.1.1.4 netbsd-5-1:1.1.1.4.0.12 netbsd-5-1-RELEASE:1.1.1.4 netbsd-5-1-RC4:1.1.1.4 matt-nb5-mips64-k15:1.1.1.4 netbsd-5-1-RC3:1.1.1.4 netbsd-5-1-RC2:1.1.1.4 netbsd-5-1-RC1:1.1.1.4 netbsd-5-0-2-RELEASE:1.1.1.4 matt-nb5-mips64-premerge-20091211:1.1.1.4 matt-premerge-20091211:1.1.1.4 matt-nb5-mips64-u2-k2-k4-k7-k8-k9:1.1.1.4 matt-nb4-mips64-k7-u2a-k9b:1.1.1.4 matt-nb5-mips64-u1-k1-k5:1.1.1.4 matt-nb5-mips64:1.1.1.4.0.10 netbsd-5-0-1-RELEASE:1.1.1.4 jym-xensuspend-nbase:1.1.1.4 netbsd-5-0:1.1.1.4.0.8 netbsd-5-0-RELEASE:1.1.1.4 netbsd-5-0-RC4:1.1.1.4 netbsd-5-0-RC3:1.1.1.4 netbsd-5-0-RC2:1.1.1.4 jym-xensuspend:1.1.1.4.0.6 jym-xensuspend-base:1.1.1.4 netbsd-5-0-RC1:1.1.1.4 netbsd-5:1.1.1.4.0.4 netbsd-5-base:1.1.1.4 matt-mips64-base2:1.1.1.4 matt-mips64:1.1.1.3.0.28 netbsd-4-0-1-RELEASE:1.1.1.3 wrstuden-revivesa-base-3:1.1.1.4 wrstuden-revivesa-base-2:1.1.1.4 wrstuden-fixsa-newbase:1.1.1.3 texinfo-4-8:1.1.1.4 wrstuden-revivesa-base-1:1.1.1.3 yamt-pf42-base4:1.1.1.3 yamt-pf42-base3:1.1.1.3 hpcarm-cleanup-nbase:1.1.1.3 yamt-pf42-baseX:1.1.1.3 yamt-pf42-base2:1.1.1.3 wrstuden-revivesa:1.1.1.3.0.26 wrstuden-revivesa-base:1.1.1.3 yamt-pf42:1.1.1.3.0.24 yamt-pf42-base:1.1.1.3 keiichi-mipv6:1.1.1.3.0.22 keiichi-mipv6-base:1.1.1.3 matt-armv6-nbase:1.1.1.3 matt-armv6-prevmlocking:1.1.1.3 wrstuden-fixsa-base-1:1.1.1.3 netbsd-4-0:1.1.1.3.0.20 netbsd-4-0-RELEASE:1.1.1.3 cube-autoconf:1.1.1.3.0.18 cube-autoconf-base:1.1.1.3 netbsd-4-0-RC5:1.1.1.3 netbsd-4-0-RC4:1.1.1.3 netbsd-4-0-RC3:1.1.1.3 netbsd-4-0-RC2:1.1.1.3 netbsd-4-0-RC1:1.1.1.3 matt-armv6:1.1.1.3.0.16 matt-armv6-base:1.1.1.3 matt-mips64-base:1.1.1.3 hpcarm-cleanup:1.1.1.3.0.14 hpcarm-cleanup-base:1.1.1.3 netbsd-3-1-1-RELEASE:1.1.1.3 netbsd-3-0-3-RELEASE:1.1.1.3 wrstuden-fixsa:1.1.1.3.0.12 wrstuden-fixsa-base:1.1.1.3 abandoned-netbsd-4-base:1.1.1.3 abandoned-netbsd-4:1.1.1.3.0.6 netbsd-3-1:1.1.1.3.0.8 netbsd-3-1-RELEASE:1.1.1.3 netbsd-3-0-2-RELEASE:1.1.1.3 netbsd-3-1-RC4:1.1.1.3 netbsd-3-1-RC3:1.1.1.3 netbsd-3-1-RC2:1.1.1.3 netbsd-3-1-RC1:1.1.1.3 netbsd-4:1.1.1.3.0.10 netbsd-4-base:1.1.1.3 netbsd-3-0-1-RELEASE:1.1.1.3 netbsd-3-0:1.1.1.3.0.4 netbsd-3-0-RELEASE:1.1.1.3 netbsd-3-0-RC6:1.1.1.3 netbsd-3-0-RC5:1.1.1.3 netbsd-3-0-RC4:1.1.1.3 netbsd-3-0-RC3:1.1.1.3 netbsd-3-0-RC2:1.1.1.3 netbsd-3-0-RC1:1.1.1.3 netbsd-2-0-3-RELEASE:1.1.1.2 netbsd-2-1:1.1.1.2.0.6 netbsd-2-1-RELEASE:1.1.1.2 netbsd-2-1-RC6:1.1.1.2 netbsd-2-1-RC5:1.1.1.2 netbsd-2-1-RC4:1.1.1.2 netbsd-2-1-RC3:1.1.1.2 netbsd-2-1-RC2:1.1.1.2 netbsd-2-1-RC1:1.1.1.2 netbsd-2-0-2-RELEASE:1.1.1.2 netbsd-3:1.1.1.3.0.2 netbsd-3-base:1.1.1.3 netbsd-2-0-1-RELEASE:1.1.1.2 netbsd-2:1.1.1.2.0.4 netbsd-2-base:1.1.1.2 netbsd-2-0-RELEASE:1.1.1.2 netbsd-2-0-RC5:1.1.1.2 netbsd-2-0-RC4:1.1.1.2 netbsd-2-0-RC3:1.1.1.2 netbsd-2-0-RC2:1.1.1.2 netbsd-2-0-RC1:1.1.1.2 texinfo-4-7:1.1.1.3 netbsd-2-0:1.1.1.2.0.2 netbsd-2-0-base:1.1.1.2 texinfo-4-6:1.1.1.2 texinfo-4-5:1.1.1.1 texinfo-4-3:1.1.1.1 FSF:1.1.1; locks; strict; comment @# @; 1.2 date 2016.01.14.00.41.42; author christos; state dead; branches; next 1.1; commitid 5Plxct6IJ6dFLPQy; 1.1 date 2003.01.17.14.54.19; author wiz; state Exp; branches 1.1.1.1; next ; 1.1.1.1 date 2003.01.17.14.54.19; author wiz; state Exp; branches; next 1.1.1.2; 1.1.1.2 date 2003.07.03.14.58.40; author wiz; state Exp; branches; next 1.1.1.3; 1.1.1.3 date 2004.07.12.23.26.34; author wiz; state Exp; branches 1.1.1.3.26.1; next 1.1.1.4; 1.1.1.4 date 2008.09.02.07.46.21; author christos; state Exp; branches; next ; 1.1.1.3.26.1 date 2008.09.18.04.48.26; author wrstuden; state Exp; branches; next ; desc @@ 1.2 log @Texinfo has moved. @ text @#! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. if test -z "$depfile"; then base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` dir=`echo "$object" | sed 's,/.*$,/,'` if test "$dir" = "$object"; then dir= fi # FIXME: should be _deps on DOS. depfile="$dir.deps/$base" fi tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@@" "-Wp,-MDupdate,$tmpdepfile" else "$@@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. This file always lives in the current directory. # Also, the AIX compiler puts `$object:' at the start of each line; # $object doesn't have directory information. stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" outname="$stripped.o" if test "$libtool" = yes; then "$@@" -Wc,-M else "$@@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1="$dir.libs/$base.lo.d" tmpdepfile2="$dir.libs/$base.d" "$@@" -Wc,-MD else tmpdepfile1="$dir$base.o.d" tmpdepfile2="$dir$base.d" "$@@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a space and a tab in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o. "$@@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. We will use -o /dev/null later, # however we can't do the remplacement now because # `-o $object' might simply not be used IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M "$@@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@@" || exit $? # X makedepend shift cleared=no for arg in "$@@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@@" "$arg"; shift ;; -*) ;; *) set fnord "$@@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout. "$@@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@@" "$arg" shift # fnord shift # $arg ;; esac done "$@@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@@" shift shift ;; *) set fnord "$@@" "$arg" shift shift ;; esac done "$@@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @Import of texinfo-4.3. @ text @@ 1.1.1.2 log @Import of texinfo-4.6. @ text @d4 1 a4 1 # Copyright 1999, 2000, 2003 Free Software Foundation, Inc. a208 30 icc) # Must come before tru64. # Intel's C compiler understands `-MD -MF file'. However # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: "$@@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; d244 1 a244 1 sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" d268 3 a270 1 # Remove `-o $object'. d290 1 a290 5 # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" a308 7 # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi d321 1 a321 3 # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) @ 1.1.1.3 log @Import of texinfo-4.7, as prepared by texinfo2netbsd. Changes since 4.6: 4.7 (9 April 2004) * Language: . new commands @@float, @@caption, @@shortcaption, @@listoffloats for initial implementation of floating material (figures, tables, etc). Ironically, they do not yet actually float anywhere. . new commands @@docbook, @@ifdocbook, @@ifnotdocbook for conditional Docbook. . new commands @@ordf{} and @@ordm{} for Spanish feminine/masculine ordinals. . new commands @@deftypecv[x] for class variables in typed OO languages. . new command @@registeredsymbol for the r-in-a-circle symbol. . new command @@headitem to make a heading row in @@multitable. . new command @@LaTeX{} for the LaTeX logo. . new command @@comma{} to avoid comma-parsing problems. . @@url is now a synonym for @@uref; new command @@indicateurl has the old meaning of just displaying a url as text. . @@quotation now accepts an optional argument for labelling the text as a `Note', `Tip', etc. . @@defun (et al.) heading lines can now be continued with a lone @@. . @@acronym accepts an optional argument for the meaning of the acronym. * makeinfo: . New environment variable TEXINFO_OUTPUT_FORMAT determines the output format at runtime, if no options are specified. . New option --plaintext, equivalent to --no-headers with Info output. . All outputs: - sections are numbered by default. . Info output: - punctuation is inserted after @@pxref and @@ref, if needed to make cross-references valid. - line numbers included in index menus, so Info readers can go to the exact line of an entry, not just a node. Also in plaintext output. - ^@@^H[index^@@^H] cookie included in index menus, so Info readers can handle the ] etc. commands better. . HTML output: - new algorithm for cross-references to other manuals, for maximum portability and stability. - include node name in with split output. - @@multicolumn fractions become percentages. - entities used for bullets, quotes, dashes, and others. - index entries are links to the exact locations. - <h4> and <h5> used for @@sub and @@subsubsections again. - accented dotless i supported. . XML output: many new tags and structure to preserve more source features. . Docbook output: - upgraded DTD to Docbook XML 4.2, no longer using Docbook SGML. - improved translation in general, for instance: - line annotations and marked quotations. * texi2dvi: . if available, use etex (pdfetex if --pdf) by default. . if the input file includes thumbpdf.sty (for LaTeX), then run thumbpdf. . more output if --debug. * texinfo.tex: . @@defun names are now printed in typewriter (instead of bold), and within the arguments, @@var text is printed in slanted typewriter. . @@tex code is executed inside a TeX group, so that any changes must be prefixed with \global (or the equivalent) to be effective. (This change was actually made years ago, but never made it into the NEWS.) * info: . new option --where (aka --location, -w) to report where an Info file would be found, instead of reading it. . by default, output ANSI terminal escape sequences as-is; new option --no-raw-escapes overrides this. . use the newly-generated index line numbers. * Distribution: . new script gendocs.sh (not installed), for use by GNU maintainers in getting their manuals on the GNU web site. Documented in maintain.texi (http://www.gnu.org/prep/maintain_toc.html). . Most code uses ANSI C prototypes, to some extent. . New translation: nb. . automake 1.8.3, autoconf 2.59, gettext 0.14.1. @ text @d2 1 d4 1 a4 4 scriptversion=2003-12-28.12 # Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. a27 31 case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to <bug-automake@@gnu.org>. EOF exit 0 ;; -v | --v*) echo "depcomp $scriptversion" exit 0 ;; esac d32 11 a43 3 # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} d175 4 a178 5 # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` d180 1 d186 1 a187 7 if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi a194 1 outname="$stripped.o" d210 3 a212 1 # Intel's C compiler understands `-MD -MF file'. However on d214 1 a214 1 # ICC 7.0 will fill foo.d with something like a221 6 # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... d231 1 a231 2 # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. d234 2 a235 5 sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" d273 1 a273 1 # That's a tab and a space in the []. d287 1 a287 1 # always write the preprocessed file to stdout, regardless of -o. d383 1 a383 1 # always write the preprocessed file to stdout. d425 1 a425 1 # always write the preprocessed file to stdout, regardless of -o, a464 9 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: @ 1.1.1.3.26.1 log @Sync with wrstuden-revivesa-base-2. @ text @d4 1 a4 1 scriptversion=2004-05-31.23 d6 1 a6 1 # Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. a289 5 # Dependencies are output in .lo.d with libtool 1.4. # With libtool 1.5 they are output both in $dir.libs/$base.o.d # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the # latter, because the former will be cleaned when $dir.libs is # erased. d291 1 a291 2 tmpdepfile2="$dir$base.o.d" tmpdepfile3="$dir.libs/$base.d" a295 1 tmpdepfile3="$dir$base.d" d302 1 a302 1 rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" d308 1 a308 1 elif test -f "$tmpdepfile2"; then a309 2 else tmpdepfile="$tmpdepfile3" @ 1.1.1.4 log @import last gplv2 version @ text @d4 1 a4 1 scriptversion=2004-05-31.23 d6 1 a6 1 # Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. a289 5 # Dependencies are output in .lo.d with libtool 1.4. # With libtool 1.5 they are output both in $dir.libs/$base.o.d # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the # latter, because the former will be cleaned when $dir.libs is # erased. d291 1 a291 2 tmpdepfile2="$dir$base.o.d" tmpdepfile3="$dir.libs/$base.d" a295 1 tmpdepfile3="$dir$base.d" d302 1 a302 1 rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" d308 1 a308 1 elif test -f "$tmpdepfile2"; then a309 2 else tmpdepfile="$tmpdepfile3" @