head	1.2;
access;
symbols
	perseant-exfatfs-base-20250801:1.2
	perseant-exfatfs-base-20240630:1.2
	cjep_sun2x:1.2.0.44
	cjep_sun2x-base:1.2
	cjep_staticlib_x-base1:1.2
	cjep_staticlib_x:1.2.0.42
	cjep_staticlib_x-base:1.2
	phil-wifi-20200421:1.2
	phil-wifi-20200411:1.2
	phil-wifi-20200406:1.2
	pgoyette-compat-merge-20190127:1.2
	pgoyette-compat-20190127:1.2
	pgoyette-compat-20190118:1.2
	pgoyette-compat-1226:1.2
	pgoyette-compat-1126:1.2
	pgoyette-compat-1020:1.2
	pgoyette-compat-0930:1.2
	pgoyette-compat-0906:1.2
	pgoyette-compat-0728:1.2
	pgoyette-compat-0625:1.2
	pgoyette-compat-0521:1.2
	pgoyette-compat-0502:1.2
	pgoyette-compat-0422:1.2
	pgoyette-compat-0415:1.2
	pgoyette-compat-0407:1.2
	pgoyette-compat-0330:1.2
	pgoyette-compat-0322:1.2
	pgoyette-compat-0315:1.2
	pgoyette-compat:1.2.0.40
	pgoyette-compat-base:1.2
	perseant-stdc-iso10646:1.2.0.38
	perseant-stdc-iso10646-base:1.2
	prg-localcount2-base3:1.2
	prg-localcount2-base2:1.2
	prg-localcount2-base1:1.2
	prg-localcount2:1.2.0.36
	prg-localcount2-base:1.2
	pgoyette-localcount-20170426:1.2
	bouyer-socketcan-base1:1.2
	pgoyette-localcount-20170320:1.2
	bouyer-socketcan:1.2.0.34
	bouyer-socketcan-base:1.2
	pgoyette-localcount-20170107:1.2
	pgoyette-localcount-20161104:1.2
	localcount-20160914:1.2
	pgoyette-localcount-20160806:1.2
	pgoyette-localcount-20160726:1.2
	pgoyette-localcount:1.2.0.32
	pgoyette-localcount-base:1.2
	netbsd-5-2-3-RELEASE:1.2
	netbsd-5-1-5-RELEASE:1.2
	yamt-pagecache-base9:1.2
	yamt-pagecache-tag8:1.2
	tls-earlyentropy:1.2.0.28
	tls-earlyentropy-base:1.2
	riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.2
	riastradh-drm2-base3:1.2
	netbsd-5-2-2-RELEASE:1.2
	netbsd-5-1-4-RELEASE:1.2
	netbsd-5-2-1-RELEASE:1.2
	netbsd-5-1-3-RELEASE:1.2
	agc-symver:1.2.0.30
	agc-symver-base:1.2
	tls-maxphys-base:1.2
	yamt-pagecache-base8:1.2
	netbsd-5-2:1.2.0.26
	yamt-pagecache-base7:1.2
	netbsd-5-2-RELEASE:1.2
	netbsd-5-2-RC1:1.2
	yamt-pagecache-base6:1.2
	yamt-pagecache-base5:1.2
	yamt-pagecache-base4:1.2
	netbsd-5-1-2-RELEASE:1.2
	netbsd-5-1-1-RELEASE:1.2
	yamt-pagecache-base3:1.2
	yamt-pagecache-base2:1.2
	yamt-pagecache:1.2.0.24
	yamt-pagecache-base:1.2
	bouyer-quota2-nbase:1.2
	bouyer-quota2:1.2.0.22
	bouyer-quota2-base:1.2
	matt-nb5-pq3:1.2.0.20
	matt-nb5-pq3-base:1.2
	netbsd-5-1:1.2.0.18
	netbsd-5-1-RELEASE:1.2
	netbsd-5-1-RC4:1.2
	netbsd-5-1-RC3:1.2
	netbsd-5-1-RC2:1.2
	netbsd-5-1-RC1:1.2
	netbsd-5-0-2-RELEASE:1.2
	netbsd-5-0-1-RELEASE:1.2
	jym-xensuspend-nbase:1.2
	netbsd-5-0:1.2.0.16
	netbsd-5-0-RELEASE:1.2
	netbsd-5-0-RC4:1.2
	netbsd-5-0-RC3:1.2
	netbsd-5-0-RC2:1.2
	jym-xensuspend:1.2.0.14
	jym-xensuspend-base:1.2
	netbsd-5-0-RC1:1.2
	netbsd-5:1.2.0.12
	netbsd-5-base:1.2
	mjf-devfs2:1.2.0.10
	mjf-devfs2-base:1.2
	yamt-pf42-base4:1.2
	yamt-pf42-base3:1.2
	hpcarm-cleanup-nbase:1.2
	yamt-pf42-base2:1.2
	yamt-pf42:1.2.0.8
	yamt-pf42-base:1.2
	keiichi-mipv6:1.2.0.6
	keiichi-mipv6-base:1.2
	cube-autoconf:1.2.0.4
	cube-autoconf-base:1.2
	hpcarm-cleanup:1.2.0.2
	hpcarm-cleanup-base:1.2
	netbsd-3-1-1-RELEASE:1.1.1.1
	netbsd-3-0-3-RELEASE:1.1.1.1
	abandoned-netbsd-4-base:1.1.1.1
	abandoned-netbsd-4:1.1.1.1.0.12
	predelete-gcc-3:1.1.1.1
	netbsd-3-1:1.1.1.1.0.14
	netbsd-3-1-RELEASE:1.1.1.1
	netbsd-3-0-2-RELEASE:1.1.1.1
	netbsd-3-1-RC4:1.1.1.1
	netbsd-3-1-RC3:1.1.1.1
	netbsd-3-1-RC2:1.1.1.1
	netbsd-3-1-RC1:1.1.1.1
	netbsd-3-0-1-RELEASE:1.1.1.1
	gcc-3-3-6:1.1.1.1
	netbsd-3-0:1.1.1.1.0.10
	netbsd-3-0-RELEASE:1.1.1.1
	netbsd-3-0-RC6:1.1.1.1
	netbsd-3-0-RC5:1.1.1.1
	netbsd-3-0-RC4:1.1.1.1
	netbsd-3-0-RC3:1.1.1.1
	netbsd-3-0-RC2:1.1.1.1
	netbsd-3-0-RC1:1.1.1.1
	netbsd-2-0-3-RELEASE:1.1.1.1
	netbsd-2-1:1.1.1.1.0.8
	netbsd-2-1-RELEASE:1.1.1.1
	netbsd-2-1-RC6:1.1.1.1
	netbsd-2-1-RC5:1.1.1.1
	netbsd-2-1-RC4:1.1.1.1
	netbsd-2-1-RC3:1.1.1.1
	netbsd-2-1-RC2:1.1.1.1
	netbsd-2-1-RC1:1.1.1.1
	netbsd-2-0-2-RELEASE:1.1.1.1
	netbsd-3:1.1.1.1.0.6
	netbsd-3-base:1.1.1.1
	netbsd-2-0-1-RELEASE:1.1.1.1
	netbsd-2:1.1.1.1.0.4
	netbsd-2-base:1.1.1.1
	netbsd-2-0-RELEASE:1.1.1.1
	netbsd-2-0-RC5:1.1.1.1
	netbsd-2-0-RC4:1.1.1.1
	netbsd-2-0-RC3:1.1.1.1
	netbsd-2-0-RC2:1.1.1.1
	netbsd-2-0-RC1:1.1.1.1
	netbsd-2-0:1.1.1.1.0.2
	netbsd-2-0-base:1.1.1.1
	gcc-3-3-3:1.1.1.1
	gcc-3-3-3-20040209:1.1.1.1
	mrg-before-3-3-3pre-20040209:1.1.1.1
	gcc-3-3-2:1.1.1.1
	gcc-3-3-1:1.1.1.1
	gcc-3-3-1-20030720:1.1.1.1
	FSF:1.1.1;
locks; strict;
comment	@# @;


1.2
date	2006.11.19.08.37.01;	author skrll;	state dead;
branches;
next	1.1;

1.1
date	2003.07.23.02.42.53;	author mrg;	state Exp;
branches
	1.1.1.1;
next	;

1.1.1.1
date	2003.07.23.02.42.53;	author mrg;	state Exp;
branches;
next	;


desc
@@


1.2
log
@Act as mrg's keyboard and delete gcc 3.
@
text
@# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @@SHELL@@

srcdir = @@srcdir@@
top_srcdir = @@top_srcdir@@
VPATH = @@srcdir@@
prefix = @@prefix@@
exec_prefix = @@exec_prefix@@

bindir = @@bindir@@
sbindir = @@sbindir@@
libexecdir = @@libexecdir@@
datadir = @@datadir@@
sysconfdir = @@sysconfdir@@
sharedstatedir = @@sharedstatedir@@
localstatedir = @@localstatedir@@
libdir = @@libdir@@
infodir = @@infodir@@
mandir = @@mandir@@
includedir = @@includedir@@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@@PACKAGE@@
pkglibdir = $(libdir)/@@PACKAGE@@
pkgincludedir = $(includedir)/@@PACKAGE@@

top_builddir = ..

ACLOCAL = @@ACLOCAL@@
AUTOCONF = @@AUTOCONF@@
AUTOMAKE = @@AUTOMAKE@@
AUTOHEADER = @@AUTOHEADER@@

INSTALL = @@INSTALL@@
INSTALL_PROGRAM = @@INSTALL_PROGRAM@@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @@INSTALL_DATA@@
INSTALL_SCRIPT = @@INSTALL_SCRIPT@@
transform = @@program_transform_name@@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @@build_alias@@
build_triplet = @@build@@
host_alias = @@host_alias@@
host_triplet = @@host@@
target_alias = @@target_alias@@
target_triplet = @@target@@
AR = @@AR@@
AS = @@AS@@
ATOMICITY_INC_SRCDIR = @@ATOMICITY_INC_SRCDIR@@
AWK = @@AWK@@
BASIC_FILE_CC = @@BASIC_FILE_CC@@
BASIC_FILE_H = @@BASIC_FILE_H@@
CCODECVT_C = @@CCODECVT_C@@
CCODECVT_CC = @@CCODECVT_CC@@
CCODECVT_H = @@CCODECVT_H@@
CCOLLATE_CC = @@CCOLLATE_CC@@
CCTYPE_CC = @@CCTYPE_CC@@
CLOCALE_CC = @@CLOCALE_CC@@
CLOCALE_H = @@CLOCALE_H@@
CLOCALE_INTERNAL_H = @@CLOCALE_INTERNAL_H@@
CMESSAGES_CC = @@CMESSAGES_CC@@
CMESSAGES_H = @@CMESSAGES_H@@
CMONEY_CC = @@CMONEY_CC@@
CNUMERIC_CC = @@CNUMERIC_CC@@
CPP = @@CPP@@
CSTDIO_H = @@CSTDIO_H@@
CTIME_CC = @@CTIME_CC@@
CTIME_H = @@CTIME_H@@
CXXCPP = @@CXXCPP@@
C_INCLUDE_DIR = @@C_INCLUDE_DIR@@
DEBUG_FLAGS = @@DEBUG_FLAGS@@
DLLTOOL = @@DLLTOOL@@
EXEEXT = @@EXEEXT@@
EXTRA_CXX_FLAGS = @@EXTRA_CXX_FLAGS@@
GCJ = @@GCJ@@
GCJFLAGS = @@GCJFLAGS@@
GLIBCPP_IS_CROSS_COMPILING = @@GLIBCPP_IS_CROSS_COMPILING@@
LIBIO_INCLUDES = @@LIBIO_INCLUDES@@
LIBMATHOBJS = @@LIBMATHOBJS@@
LIBMATH_INCLUDES = @@LIBMATH_INCLUDES@@
LIBSUPCXX_PICFLAGS = @@LIBSUPCXX_PICFLAGS@@
LIBTOOL = @@LIBTOOL@@
LIBUNWIND_FLAG = @@LIBUNWIND_FLAG@@
LN_S = @@LN_S@@
MAINT = @@MAINT@@
MAKEINFO = @@MAKEINFO@@
OBJDUMP = @@OBJDUMP@@
OBJEXT = @@OBJEXT@@
OPT_LDFLAGS = @@OPT_LDFLAGS@@
OS_INC_SRCDIR = @@OS_INC_SRCDIR@@
PACKAGE = @@PACKAGE@@
RANLIB = @@RANLIB@@
SECTION_FLAGS = @@SECTION_FLAGS@@
SECTION_LDFLAGS = @@SECTION_LDFLAGS@@
STRIP = @@STRIP@@
SYMVER_MAP = @@SYMVER_MAP@@
TOPLEVEL_INCLUDES = @@TOPLEVEL_INCLUDES@@
USE_NLS = @@USE_NLS@@
VERSION = @@VERSION@@
WARN_FLAGS = @@WARN_FLAGS@@
WERROR = @@WERROR@@
baseline_file = @@baseline_file@@
check_msgfmt = @@check_msgfmt@@
enable_shared = @@enable_shared@@
enable_static = @@enable_static@@
glibcpp_CXX = @@glibcpp_CXX@@
glibcpp_MOFILES = @@glibcpp_MOFILES@@
glibcpp_POFILES = @@glibcpp_POFILES@@
glibcpp_basedir = @@glibcpp_basedir@@
glibcpp_builddir = @@glibcpp_builddir@@
glibcpp_localedir = @@glibcpp_localedir@@
glibcpp_prefixdir = @@glibcpp_prefixdir@@
glibcpp_srcdir = @@glibcpp_srcdir@@
glibcpp_thread_h = @@glibcpp_thread_h@@
glibcpp_toolexecdir = @@glibcpp_toolexecdir@@
glibcpp_toolexeclibdir = @@glibcpp_toolexeclibdir@@
gxx_include_dir = @@gxx_include_dir@@
ifGNUmake = @@ifGNUmake@@
libio_la = @@libio_la@@
libtool_VERSION = @@libtool_VERSION@@
toplevel_srcdir = @@toplevel_srcdir@@

AUTOMAKE_OPTIONS = 1.3 cygnus
MAINT_CHARSET = latin1

mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs

# Cross compiler and multilib support.
CC = @@CC@@
CXX = @@glibcpp_CXX@@
toolexecdir = @@glibcpp_toolexecdir@@
toolexeclibdir = @@glibcpp_toolexeclibdir@@

# Need this library to both be part of libstdc++.a, and installed
# separately too.
# 1) separate libsupc++.la 
toolexeclib_LTLIBRARIES = libsupc++.la
# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a
noinst_LTLIBRARIES = libsupc++convenience.la

# Compile flags that should be constant throughout the build, both for
# SUBDIRS and for libstdc++-v3 in general.
OPTIMIZE_CXXFLAGS = @@OPTIMIZE_CXXFLAGS@@

# These bits are all figured out from configure. Look in acinclude.m4
# or configure.in to see how they are set. See GLIBCPP_EXPORT_FLAGS
CONFIG_CXXFLAGS = \
	@@SECTION_FLAGS@@ @@EXTRA_CXX_FLAGS@@ 


# Warning flags to use.
WARN_CXXFLAGS = \
	@@WARN_FLAGS@@ $(WERROR) -fdiagnostics-show-location=once


# Use common includes from acinclude.m4/GLIBCPP_EXPORT_INCLUDES
GLIBCPP_INCLUDES = @@GLIBCPP_INCLUDES@@
LIBSUPCXX_INCLUDES = @@LIBSUPCXX_INCLUDES@@
GCC_INCLUDES = -I$(toplevel_srcdir)/gcc -I$(toplevel_srcdir)/include

INCLUDES = \
	$(GCC_INCLUDES) $(GLIBCPP_INCLUDES) $(LIBSUPCXX_INCLUDES)


headers = \
	exception new typeinfo cxxabi.h exception_defines.h 


c_sources = \
	cxa_demangle.c \
	dyn-string.c 


sources = \
	del_op.cc \
	del_opnt.cc \
	del_opv.cc \
	del_opvnt.cc \
	eh_alloc.cc \
	eh_aux_runtime.cc \
	eh_catch.cc \
	eh_exception.cc \
	eh_globals.cc \
	eh_personality.cc \
	eh_terminate.cc \
	eh_throw.cc \
	eh_type.cc \
	guard.cc \
	new_handler.cc \
	new_op.cc \
	new_opnt.cc \
	new_opv.cc \
	new_opvnt.cc \
	pure.cc \
	tinfo.cc \
	tinfo2.cc \
	vec.cc


libsupc___la_SOURCES = $(sources) $(c_sources)
libsupc__convenience_la_SOURCES = $(sources) $(c_sources)

glibcppinstalldir = $(gxx_include_dir)
glibcppinstall_HEADERS = $(headers)

LIBSUPCXX_CXXFLAGS = $(LIBSUPCXX_PICFLAGS)

# Use special rules for pulling things out of libiberty.  These
# objects should be compiled with the "C" compiler, not the C++
# compiler, and also should not use the C++ includes.
C_COMPILE = \
	$(CC) $(DEFS) $(GCC_INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# LTCOMPILE is copied from LTCXXCOMPILE below.
LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared --mode=compile $(CC) \
	    $(DEFS) $(GCC_INCLUDES) $(LIBSUPCXX_PICFLAGS) \
            $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion call for it. (ie, --enable-debug)
AM_CXXFLAGS = \
	-fno-implicit-templates \
	$(LIBSUPCXX_CXXFLAGS) \
	$(WARN_CXXFLAGS) \
	$(OPTIMIZE_CXXFLAGS) \
	$(CONFIG_CXXFLAGS) 


AM_MAKEFLAGS = \
	"gxx_include_dir=$(gxx_include_dir)"


# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use.
#
# We have to put --tag disable-shared after --tag CXX lest things
# CXX undo the affect of disable-shared.
LTCXXCOMPILE = $(LIBTOOL) --tag CXX --tag disable-shared \
               --mode=compile $(CXX) $(INCLUDES) \
	       $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(AM_CXXFLAGS) 


# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX --tag disable-shared \
          --mode=link $(CXX) \
          @@OPT_LDFLAGS@@ @@SECTION_LDFLAGS@@ $(AM_CXXFLAGS) $(LDFLAGS) -o $@@

CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
LTLIBRARIES =  $(noinst_LTLIBRARIES) $(toolexeclib_LTLIBRARIES)


DEFS = @@DEFS@@ -I. -I$(srcdir) -I..
CPPFLAGS = @@CPPFLAGS@@
LDFLAGS = @@LDFLAGS@@
LIBS = @@LIBS@@
libsupc__convenience_la_LDFLAGS = 
libsupc__convenience_la_LIBADD = 
libsupc__convenience_la_OBJECTS =  del_op.lo del_opnt.lo del_opv.lo \
del_opvnt.lo eh_alloc.lo eh_aux_runtime.lo eh_catch.lo eh_exception.lo \
eh_globals.lo eh_personality.lo eh_terminate.lo eh_throw.lo eh_type.lo \
guard.lo new_handler.lo new_op.lo new_opnt.lo new_opv.lo new_opvnt.lo \
pure.lo tinfo.lo tinfo2.lo vec.lo cxa_demangle.lo dyn-string.lo
libsupc___la_LDFLAGS = 
libsupc___la_LIBADD = 
libsupc___la_OBJECTS =  del_op.lo del_opnt.lo del_opv.lo del_opvnt.lo \
eh_alloc.lo eh_aux_runtime.lo eh_catch.lo eh_exception.lo eh_globals.lo \
eh_personality.lo eh_terminate.lo eh_throw.lo eh_type.lo guard.lo \
new_handler.lo new_op.lo new_opnt.lo new_opv.lo new_opvnt.lo pure.lo \
tinfo.lo tinfo2.lo vec.lo cxa_demangle.lo dyn-string.lo
CXXFLAGS = @@CXXFLAGS@@
CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CFLAGS = @@CFLAGS@@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@@
HEADERS =  $(glibcppinstall_HEADERS)

DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
SOURCES = $(libsupc__convenience_la_SOURCES) $(libsupc___la_SOURCES)
OBJECTS = $(libsupc__convenience_la_OBJECTS) $(libsupc___la_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .cc .lo .o .obj .s
$(srcdir)/Makefile.in: @@MAINTAINER_MODE_TRUE@@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --cygnus libsupc++/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@@ CONFIG_HEADERS= $(SHELL) ./config.status


mostlyclean-noinstLTLIBRARIES:

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)

distclean-noinstLTLIBRARIES:

maintainer-clean-noinstLTLIBRARIES:

mostlyclean-toolexeclibLTLIBRARIES:

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)

distclean-toolexeclibLTLIBRARIES:

maintainer-clean-toolexeclibLTLIBRARIES:

install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(toolexeclibdir)
	@@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toolexeclibdir)/$$p"; \
	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(toolexeclibdir)/$$p; \
	  else :; fi; \
	done

uninstall-toolexeclibLTLIBRARIES:
	@@$(NORMAL_UNINSTALL)
	list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(toolexeclibdir)/$$p; \
	done

.c.o:
	$(COMPILE) -c $<

# FIXME: We should only use cygpath when building on Windows,
# and only if it is available.
.c.obj:
	$(COMPILE) -c `cygpath -w $<`

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

libsupc++convenience.la: $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_DEPENDENCIES)
	$(CXXLINK)  $(libsupc__convenience_la_LDFLAGS) $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_LIBADD) $(LIBS)

libsupc++.la: $(libsupc___la_OBJECTS) $(libsupc___la_DEPENDENCIES)
	$(CXXLINK) -rpath $(toolexeclibdir) $(libsupc___la_LDFLAGS) $(libsupc___la_OBJECTS) $(libsupc___la_LIBADD) $(LIBS)
.cc.o:
	$(CXXCOMPILE) -c $<
.cc.obj:
	$(CXXCOMPILE) -c `cygpath -w $<`
.cc.lo:
	$(LTCXXCOMPILE) -c $<

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = libsupc++

distdir: $(DISTFILES)
	@@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am:
check: check-am
installcheck-am:
installcheck: installcheck-am
install-info-am: 
install-info: install-info-am
install-exec-am: install-toolexeclibLTLIBRARIES
install-exec: install-exec-am

install-data-am: install-glibcppinstallHEADERS
install-data: install-data-am

install-am: all-am
	@@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-toolexeclibLTLIBRARIES \
		uninstall-glibcppinstallHEADERS
uninstall: uninstall-am
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(toolexeclibdir) \
		$(DESTDIR)$(glibcppinstalldir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-noinstLTLIBRARIES \
		mostlyclean-toolexeclibLTLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-noinstLTLIBRARIES clean-toolexeclibLTLIBRARIES \
		clean-compile clean-libtool clean-tags clean-generic \
		mostlyclean-am

clean: clean-am

distclean-am:  distclean-noinstLTLIBRARIES \
		distclean-toolexeclibLTLIBRARIES distclean-compile \
		distclean-libtool distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-noinstLTLIBRARIES \
		maintainer-clean-toolexeclibLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@@echo "This command is intended for maintainers to use;"
	@@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \
clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \
mostlyclean-toolexeclibLTLIBRARIES distclean-toolexeclibLTLIBRARIES \
clean-toolexeclibLTLIBRARIES maintainer-clean-toolexeclibLTLIBRARIES \
uninstall-toolexeclibLTLIBRARIES install-toolexeclibLTLIBRARIES \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool uninstall-glibcppinstallHEADERS \
install-glibcppinstallHEADERS tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
check-am installcheck-am installcheck install-info-am install-info \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


cxa_demangle.c:
	rm -f $@@
	$(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@@
cxa_demangle.lo: cxa_demangle.c
	$(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
cxa_demangle.o: cxa_demangle.c
	$(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
dyn-string.c:
	rm -f $@@
	$(LN_S) $(toplevel_srcdir)/libiberty/dyn-string.c $@@
dyn-string.lo: dyn-string.c
	$(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
dyn-string.o: dyn-string.c
	$(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<

# We have to have rules modified from the default to counteract SUN make
# prepending each of $(glibcppinstall_HEADERS) with VPATH below.
install-glibcppinstallHEADERS: $(glibcppinstall_HEADERS)
	@@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(glibcppinstalldir)
	@@list='$(glibcppinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcppinstalldir)/$$q"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(glibcppinstalldir)/$$q; \
	done

uninstall-glibcppinstallHEADERS:
	@@$(NORMAL_UNINSTALL)
	list='$(glibcppinstall_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  rm -f $(DESTDIR)$(glibcppinstalldir)/$$q; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
@


1.1
log
@Initial revision
@
text
@@


1.1.1.1
log
@initial import of GCC 3.3 sources.  (this is the latest GCC 3.3.1
prerelease snapshot, 3.3.1-20030720, we will update to 3.3.1 when
it becomes available.)
@
text
@@
