head	1.2;
access;
symbols
	perseant-exfatfs-base-20250801:1.2
	perseant-exfatfs-base-20240630:1.2
	cjep_sun2x:1.2.0.44
	cjep_sun2x-base:1.2
	cjep_staticlib_x-base1:1.2
	cjep_staticlib_x:1.2.0.42
	cjep_staticlib_x-base:1.2
	phil-wifi-20200421:1.2
	phil-wifi-20200411:1.2
	phil-wifi-20200406:1.2
	pgoyette-compat-merge-20190127:1.2
	pgoyette-compat-20190127:1.2
	pgoyette-compat-20190118:1.2
	pgoyette-compat-1226:1.2
	pgoyette-compat-1126:1.2
	pgoyette-compat-1020:1.2
	pgoyette-compat-0930:1.2
	pgoyette-compat-0906:1.2
	pgoyette-compat-0728:1.2
	pgoyette-compat-0625:1.2
	pgoyette-compat-0521:1.2
	pgoyette-compat-0502:1.2
	pgoyette-compat-0422:1.2
	pgoyette-compat-0415:1.2
	pgoyette-compat-0407:1.2
	pgoyette-compat-0330:1.2
	pgoyette-compat-0322:1.2
	pgoyette-compat-0315:1.2
	pgoyette-compat:1.2.0.40
	pgoyette-compat-base:1.2
	perseant-stdc-iso10646:1.2.0.38
	perseant-stdc-iso10646-base:1.2
	prg-localcount2-base3:1.2
	prg-localcount2-base2:1.2
	prg-localcount2-base1:1.2
	prg-localcount2:1.2.0.36
	prg-localcount2-base:1.2
	pgoyette-localcount-20170426:1.2
	bouyer-socketcan-base1:1.2
	pgoyette-localcount-20170320:1.2
	bouyer-socketcan:1.2.0.34
	bouyer-socketcan-base:1.2
	pgoyette-localcount-20170107:1.2
	pgoyette-localcount-20161104:1.2
	localcount-20160914:1.2
	pgoyette-localcount-20160806:1.2
	pgoyette-localcount-20160726:1.2
	pgoyette-localcount:1.2.0.32
	pgoyette-localcount-base:1.2
	netbsd-5-2-3-RELEASE:1.2
	netbsd-5-1-5-RELEASE:1.2
	yamt-pagecache-base9:1.2
	yamt-pagecache-tag8:1.2
	tls-earlyentropy:1.2.0.28
	tls-earlyentropy-base:1.2
	riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.2
	riastradh-drm2-base3:1.2
	netbsd-5-2-2-RELEASE:1.2
	netbsd-5-1-4-RELEASE:1.2
	netbsd-5-2-1-RELEASE:1.2
	netbsd-5-1-3-RELEASE:1.2
	agc-symver:1.2.0.30
	agc-symver-base:1.2
	tls-maxphys-base:1.2
	yamt-pagecache-base8:1.2
	netbsd-5-2:1.2.0.26
	yamt-pagecache-base7:1.2
	netbsd-5-2-RELEASE:1.2
	netbsd-5-2-RC1:1.2
	yamt-pagecache-base6:1.2
	yamt-pagecache-base5:1.2
	yamt-pagecache-base4:1.2
	netbsd-5-1-2-RELEASE:1.2
	netbsd-5-1-1-RELEASE:1.2
	yamt-pagecache-base3:1.2
	yamt-pagecache-base2:1.2
	yamt-pagecache:1.2.0.24
	yamt-pagecache-base:1.2
	bouyer-quota2-nbase:1.2
	bouyer-quota2:1.2.0.22
	bouyer-quota2-base:1.2
	matt-nb5-pq3:1.2.0.20
	matt-nb5-pq3-base:1.2
	netbsd-5-1:1.2.0.18
	netbsd-5-1-RELEASE:1.2
	netbsd-5-1-RC4:1.2
	netbsd-5-1-RC3:1.2
	netbsd-5-1-RC2:1.2
	netbsd-5-1-RC1:1.2
	netbsd-5-0-2-RELEASE:1.2
	netbsd-5-0-1-RELEASE:1.2
	jym-xensuspend-nbase:1.2
	netbsd-5-0:1.2.0.16
	netbsd-5-0-RELEASE:1.2
	netbsd-5-0-RC4:1.2
	netbsd-5-0-RC3:1.2
	netbsd-5-0-RC2:1.2
	jym-xensuspend:1.2.0.14
	jym-xensuspend-base:1.2
	netbsd-5-0-RC1:1.2
	netbsd-5:1.2.0.12
	netbsd-5-base:1.2
	mjf-devfs2:1.2.0.10
	mjf-devfs2-base:1.2
	yamt-pf42-base4:1.2
	yamt-pf42-base3:1.2
	hpcarm-cleanup-nbase:1.2
	yamt-pf42-base2:1.2
	yamt-pf42:1.2.0.8
	yamt-pf42-base:1.2
	keiichi-mipv6:1.2.0.6
	keiichi-mipv6-base:1.2
	cube-autoconf:1.2.0.4
	cube-autoconf-base:1.2
	hpcarm-cleanup:1.2.0.2
	hpcarm-cleanup-base:1.2
	netbsd-3-1-1-RELEASE:1.1.1.1
	netbsd-3-0-3-RELEASE:1.1.1.1
	abandoned-netbsd-4-base:1.1.1.1
	abandoned-netbsd-4:1.1.1.1.0.12
	predelete-gcc-3:1.1.1.1
	netbsd-3-1:1.1.1.1.0.14
	netbsd-3-1-RELEASE:1.1.1.1
	netbsd-3-0-2-RELEASE:1.1.1.1
	netbsd-3-1-RC4:1.1.1.1
	netbsd-3-1-RC3:1.1.1.1
	netbsd-3-1-RC2:1.1.1.1
	netbsd-3-1-RC1:1.1.1.1
	netbsd-3-0-1-RELEASE:1.1.1.1
	gcc-3-3-6:1.1.1.1
	netbsd-3-0:1.1.1.1.0.10
	netbsd-3-0-RELEASE:1.1.1.1
	netbsd-3-0-RC6:1.1.1.1
	netbsd-3-0-RC5:1.1.1.1
	netbsd-3-0-RC4:1.1.1.1
	netbsd-3-0-RC3:1.1.1.1
	netbsd-3-0-RC2:1.1.1.1
	netbsd-3-0-RC1:1.1.1.1
	netbsd-2-0-3-RELEASE:1.1.1.1
	netbsd-2-1:1.1.1.1.0.8
	netbsd-2-1-RELEASE:1.1.1.1
	netbsd-2-1-RC6:1.1.1.1
	netbsd-2-1-RC5:1.1.1.1
	netbsd-2-1-RC4:1.1.1.1
	netbsd-2-1-RC3:1.1.1.1
	netbsd-2-1-RC2:1.1.1.1
	netbsd-2-1-RC1:1.1.1.1
	netbsd-2-0-2-RELEASE:1.1.1.1
	netbsd-3:1.1.1.1.0.6
	netbsd-3-base:1.1.1.1
	netbsd-2-0-1-RELEASE:1.1.1.1
	netbsd-2:1.1.1.1.0.4
	netbsd-2-base:1.1.1.1
	netbsd-2-0-RELEASE:1.1.1.1
	netbsd-2-0-RC5:1.1.1.1
	netbsd-2-0-RC4:1.1.1.1
	netbsd-2-0-RC3:1.1.1.1
	netbsd-2-0-RC2:1.1.1.1
	netbsd-2-0-RC1:1.1.1.1
	netbsd-2-0:1.1.1.1.0.2
	netbsd-2-0-base:1.1.1.1
	gcc-3-3-3:1.1.1.1
	gcc-3-3-3-20040209:1.1.1.1
	mrg-before-3-3-3pre-20040209:1.1.1.1
	gcc-3-3-2:1.1.1.1
	gcc-3-3-1:1.1.1.1
	gcc-3-3-1-20030720:1.1.1.1
	FSF:1.1.1;
locks; strict;
comment	@# @;


1.2
date	2006.11.19.08.36.54;	author skrll;	state dead;
branches;
next	1.1;

1.1
date	2003.07.23.02.42.43;	author mrg;	state Exp;
branches
	1.1.1.1;
next	;

1.1.1.1
date	2003.07.23.02.42.43;	author mrg;	state Exp;
branches;
next	;


desc
@@


1.2
log
@Act as mrg's keyboard and delete gcc 3.
@
text
@#!/usr/bin/env bash

# Script to do automated testing and data collection for various test
# files, so that we don't have to do this by hand on every test file.
# It attempts to collect some diagnostic info about size and speed that
# should be useful in the future as the library gets tuned for size
# and speed.  In addition, it tests static and shared linkage, iff each
# has been enabled.

# Invocation 
# mkcheck [01] 

# 1: variables
#
# WHICH determines if you are
# (0) testing the build binary and headers, or
# (1) testing the installed binary and headers, or
WHICH=$1
if [ "$WHICH"x = 0x ]; then
  echo "running mkcheck"
  echo "$0: testing the build directory"
elif [ "$WHICH"x = 1x ]; then
  echo "running mkcheck"
  echo "$0: testing the install directory"
else
  echo 'Usage: mkcheck 0    /* test the build directory    */'
  echo '       mkcheck 1    /* test the install directory  */'
  exit 1;
fi

# Now that we've successfully translated the numerical option into
# a symbolic one, we can safely ignore it.
shift

# This has been true all along.  Found out about it the hard way...
case $BASH_VERSION in
    1*)  echo 'You need bash 2.x to run mkcheck.  Exiting.'; exit 1 ;;
    *)   ;;   # ??
esac

BUILD_DIR=@@glibcpp_builddir@@
SRC_DIR=@@glibcpp_srcdir@@
PREFIX_DIR=@@glibcpp_prefixdir@@
if [ "$WHICH"x = 0x ]; then
  CXX=`$BUILD_DIR/testsuite_flags --build-cxx`
  INCLUDES=`$BUILD_DIR/testsuite_flags --build-includes`
else
  CXX=`$BUILD_DIR/testsuite_flags --install-cxx`
  INCLUDES=`$BUILD_DIR/testsuite_flags --install-includes`
fi
CXXFLAGS=`$BUILD_DIR/testsuite_flags --cxxflags`
LIBTOOL="$BUILD_DIR/libtool"
LTEXE="$LIBTOOL --mode=execute"
#LTCXX="$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $INCLUDES"
LTCXX="$CXX $CXXFLAGS $INCLUDES"

# specific libtool flag(s) to use shared libraries, if any
SH_FLAG="-Wl,--rpath -Wl,$BUILD_DIR/../../gcc -Wl,--rpath -Wl,$BUILD_DIR/src/.libs"

# specific libtool flag(s) to use static libraries, if any
ST_FLAG="-static"
#ST_FLAG="-all-static"

# Set up the testing directory, which should be in a directory called
# "testsuite" in the root level of the build directory.
TEST_DIR="$BUILD_DIR/testsuite"
# help libtool keep quiet
if [ ! -d ${TEST_DIR}/.libs ]; then
    mkdir $TEST_DIR/.libs    
fi

# the name of the file that will collect and hold all this useful data:
RESULTS_FILE="$TEST_DIR/$(date +%Y%m%d)-mkcheck.txt"

# the name of the log file that will append compiler diagnostics:
LOG_FILE="$TEST_DIR/$(date +%Y%m%d)-mkchecklog.txt"

# the names of the specific test files to be run
TESTS_FILE="$TEST_DIR/$(date +%Y%m%d)-mkcheckfiles.txt"


#
# 2: clean, make files, append general test info
#

# Remove old executables.
rm -rf "$TEST_DIR"/*exe
rm -rf "$TEST_DIR"/compile.out

# Remove old core files (which now get left in cwd, not $TEST_DIR).
rm -rf ./*core*

if [ -f $RESULTS_FILE ]; then
    rm $RESULTS_FILE
fi
if [ -f $LOG_FILE ]; then
    rm $LOG_FILE
fi

# Make a list of the files we're going to run, or use an old one if it exists.
if [ ! -f "$TESTS_FILE" ]; then
    echo "making file $TESTS_FILE"
    for LONG_NAME in $SRC_DIR/testsuite/*/*.cc
    do
        DIR_NAME=$(dirname $LONG_NAME)
        SHORT_NAME="`basename $DIR_NAME`/`basename $LONG_NAME`"
        echo "$SHORT_NAME" >> $TESTS_FILE
    done
fi

# Nasty solution to replace GNU date(1)'s %s time_t output function.
TIMER_COMMAND=$TEST_DIR/printnow.exe
if [ ! -x "$TIMER_COMMAND" ]; then
    echo "making utility $TIMER_COMMAND"
    gcc -o "$TIMER_COMMAND" "$SRC_DIR/testsuite/printnow.c"
    strip "$TIMER_COMMAND"
fi

# Copy over the data files for filebufs
cp $SRC_DIR/testsuite/27_io/*.txt $TEST_DIR
cp $SRC_DIR/testsuite/27_io/*.tst $TEST_DIR
chmod u+w $TEST_DIR/*.txt
chmod u+w $TEST_DIR/*.tst

# Emit useful info about compiler and platform
echo "host: $(uname -mrsv)" >> $RESULTS_FILE
echo "compiler: $($CXX -v 2>&1)" >> $RESULTS_FILE
echo "compiler flags: $CXXFLAGS" >> $RESULTS_FILE
echo "date: $(date +%Y%m%d)" >> $RESULTS_FILE
echo "" >> $RESULTS_FILE

explanation='+: pass, -b: build failure, -r: run failure, x: disabled'
printf "%s\n     %s\n"  'p == pass/fail execution test'  "$explanation"  \
       >> $RESULTS_FILE
echo "ctime == time to compile and link" >> $RESULTS_FILE
echo "etime == time for executable to run" >> $RESULTS_FILE
echo "text == size of the executable text section" >> $RESULTS_FILE
echo "data == size of the executable data section" >> $RESULTS_FILE
echo "total == size of the executable" >> $RESULTS_FILE
echo "" >> $RESULTS_FILE

echo "p" | awk '{printf("%s ", $1)}' >> $RESULTS_FILE
echo "ctime" "etime" | awk '{printf("%s\t%s\t", $1, $2)}' >> $RESULTS_FILE
echo "text" "data" | awk '{printf("%s\t%s\t", $1, $2)}' >> $RESULTS_FILE
echo "total" "name" | awk '{printf("%s\t%s\t", $1, $2)}' >> $RESULTS_FILE
echo "" >> $RESULTS_FILE

# Counters.  These could be members of an array, but they'd all have to
# become individuals anyhow if we ever change this script to super-portable sh.
shared_pass=0
shared_fail=0
static_pass=0
static_fail=0


#
# 2.5:  support functions
#

# Figure out how to extract size information from binaries.  We take
# the text of the value we want as an argument, and leave the size in
# the appropriate variable.
#
# We discover what kind of size(1) we are using *once* and build a shell
# function named 'size_command' to wrap it.  (The "function" keyword is
# redundant here, but helps me read it, so there.)  Previously we were
# re-discovering the size(1) arguments three times for each test; sloooow.
#
# It is VERY IMPORTANT not to compare these numbers across platforms.
# Different size(1)'s extract section information differently.  For
# example, using the native Sun size(1) and GNU size(1) built for Suns
# on the exact same binary will give very different numbers, due to all
# the variance in command-line options and arbitrary names of ELF sections.
#
# and suddenly we go to 2-space indentations...
setup_size_command()
{
  if size --version 2> /dev/null | grep -c GNU > /dev/null;
  then    # Then we're using a GNU size(1) built for this platform.
    # We lose .rodata and .data1 and who knows what else... kludge.
    function size_command()
    {
      case $1 in
        TEXT)  TEXT=$(size -B $EXENAME | tail -1 | awk '{print $1}')  ;;
        DATA)  DATA=$(size -B $EXENAME | tail -1 | awk '{print $2}')  ;;
        SIZE)  SIZE=$(size -B $EXENAME | tail -1 | awk '{print $4}')  ;;
      esac
    }
  else
    # Not using GNU size; check for platform.  These numbers seem to match
    # up to text/data/total, although their meanings seem to be different.
    # THIS TABLE IS SORTED.  KEEP IT THAT WAY.
    case @@host_os@@ in
      *aix*)
        function size_command()
        {
          case $1 in
            TEXT)  TEXT=$(size -X32_64 $EXENAME | awk '{print $2}')  ;;
            DATA)  DATA=$(size -X32_64 $EXENAME | awk '{print $4}')  ;;
            SIZE)  SIZE=$(size -X32_64 $EXENAME | awk '{print $12}')  ;;
          esac
        }
        ;;
      *hpux*)
        function size_command()
        {
          case $1 in
            TEXT)  TEXT=$(size  $EXENAME | awk '{print $1}')  ;;
            DATA)  DATA=$(size  $EXENAME | awk '{print $3}')  ;;
            SIZE)  SIZE=$(size  $EXENAME | awk '{print $7}')  ;;
          esac
        }
        ;;
      *irix*)
        function size_command()
        {
          case $1 in
            TEXT)  TEXT=$(size -4 $EXENAME | awk '{print $1}')  ;;
            DATA)  DATA=$(size -4 $EXENAME | awk '{print $3}')  ;;
            SIZE)  SIZE=$(size -4 $EXENAME | awk '{print $7}')  ;;
          esac
        }
        ;;
      *solaris*)
        function size_command()
        {
          case $1 in
            TEXT)  TEXT=$(size $EXENAME | awk '{print $1}')  ;;
            DATA)  DATA=$(size $EXENAME | awk '{print $3}')  ;;
            SIZE)  SIZE=$(size $EXENAME | awk '{print $7}')  ;;
          esac
        }
        ;;
      *)
        echo ' * Warning!  Skipping section sizes!' 1>&2
        function size_command()
        {
        case $1 in
          TEXT)  TEXT=0 ;;
          DATA)  DATA=0 ;;
          SIZE)  SIZE=0 ;;
        esac
        }
        ;;
    esac
  fi
}

# Test for file output
test_for_output()
{
    # This checks for emitted output files, which is useful when
    # testing file-related output.  The rules for this working are as
    # follows: the emitted file must have the ".txt" extension, and be
    # based on the actual *.cc file's name.  For example, 27/filbuf.cc
    # currently outputs files named 27/filebuf-2.txt and 27/filebuf-3.txt.
    # Also, the first emitted file must be in the form $NAME-1.txt.
    # The control file must follow the same constraints, but have a
    # ".tst" extension.  Thus, you have 27/filebuf-2.tst, etc.

    # NAME contains the source name, like 27/filebuf.cc
    # From that NAME, we want to generate some possible names, using
    # ls on MATCH, a pattern description generated with sed.

    # this is the name of the resulting diff file, if any
    DIFF_FILE="`echo $TEST_NAME | sed 's/cc$/diff/'`"
    # construct wildcard names, ie for $NAME=filebuf.cc, makes "filebuf*.tst"
    DATA_FILES="`echo $TEST_NAME | sed 's/\.cc/\*\.tst/g'`"
    # make sure there is at least one, then go
    ST_E="`echo $TEST_NAME | sed 's/\.cc/\-1\.tst/g'`"
    if [ -f $ST_E ]; then
        # list of actual files that match the wildcard above, ie
        # "filebuf-1.tst"
        ST_MATCH_LIST="`ls $DATA_FILES`"
        for i in $ST_MATCH_LIST; do
            # ST_OUT_FILE is generated in the build directory.
            PRE_NAME2="$TEST_DIR/`basename $i`"
            ST_OUT_FILE="`echo $PRE_NAME2 | sed 's/tst$/txt/'`"
            diff $ST_OUT_FILE $i > $DIFF_FILE
            if [ -s $DIFF_FILE ]; then
                RESULT="-r"
            else
                RESULT="+"
            fi
            rm $DIFF_FILE
        done
    else
        # the file does no output, and didn't abnormally
        # terminate, so assume passed.
        RESULT="+"
    fi
}
    

#
# 3: compile, link, execute, time
#
# Abstract out the common code for compiling, linking, executing and printing.
test_file()
{
    # NB: S_FLAG has to be last argument because it may be null, and
    # error checking hasn't been invented yet.
    NAME=$1
    EXENAME=$2
    S_FLAG=$3

    SRC_NAME="$SRC_DIR/testsuite/$1"
    TEST_NAME="$TEST_DIR/`basename $NAME`"

    # This would be deliciously easy if GNU date's %s were always around.
    # There are three ways to do this:  1) use the builtin 'time' like we
    # do later; then getting compiler errors into LOG_FILE is a nightmare.
    # 2) Grab the output of a formatted date(1) and do the math; harder
    # and harder as we try compiling at, say, top of the hour; we would
    # eventually have to calculate time_t anyhow.  Or 3) just grab two
    # time_t's (no more overhead than grabbing two date(1)'s).
    our_libs="-L$TEST_DIR -lv3test"
    compiler_invocation="$LTCXX $S_FLAG $SRC_NAME -o $EXENAME $our_libs"
    echo $compiler_invocation >> compile.out 2>&1
    COMP_TIME_START=$($TIMER_COMMAND)
    $compiler_invocation >> compile.out 2>&1
    COMP_TIME_END=$($TIMER_COMMAND)

    if [ $COMP_TIME_START -lt $COMP_TIME_END ]; then
        C_TIME=$[ $COMP_TIME_END - $COMP_TIME_START ]
    else
        C_TIME="0"
    fi

    if [ -f $EXENAME ]; then
#        rm compile.out
        size_command TEXT
        size_command DATA
        size_command SIZE

        # Actually run the executable and time it.  Note that output
        # printed by the executable will be lost and cannot be redirected,
        # because we need to capture the output of 'time'.  Bummer.
        TIMEFORMAT='timemark %R'
        E_TIME_TEXT="$(exec 2>&1; time $LTEXE $EXENAME)"
        E_ABNORMAL_TERMINATION=$?
 
        if [ "$E_ABNORMAL_TERMINATION" -ne 0 ]; then
            RESULT='-r'
	    E_TIME="0"
            rm -f ./*core
            # sometimes you want to save all core files for review:
            #mv ./core $EXENAME.core
            # sometimes the OS allows you to name core files yourself:
            #mv ./*core $EXENAME.core
            #mv ./core* $EXENAME.core
        else
            test_for_output
	    # XXX This doesn't always result in a number.
	    # E_TIME="$(echo $E_TIME_TEXT | awk '{print $2}')"
	    E_TIME="0"
        fi

        # sometimes you want to save all failing exe files for review:
        if [ "$RESULT" = '+' ]; then
            rm "$EXENAME"
        fi
    else
        # the file did not compile/link.
        printf "\n" >> $LOG_FILE
        `cat compile.out >> $LOG_FILE` 
        rm compile.out
        RESULT="-b"
        TEXT="0"
        DATA="0"
        SIZE="0"
    fi

    # update the counters
    if test "$RESULT" = "+" ; then
        if test x"$S_FLAG" = x"$ST_FLAG"; then
            static_pass=`expr $static_pass + 1`
        else
            shared_pass=`expr $shared_pass + 1`
        fi
    else
        if test x"$S_FLAG" = x"$ST_FLAG"; then
            static_fail=`expr $static_fail + 1`
        else
            shared_fail=`expr $shared_fail + 1`
        fi
    fi

    printf "%s\t" "$RESULT"
    printf "%-2s %d\t%.3f\t%s\t%s\t%s\t%s %s\n"   \
        "$RESULT" $C_TIME $E_TIME $TEXT $DATA $SIZE $NAME >> $RESULTS_FILE
}

setup_size_command
echo ""
echo "Detailed test results in .${RESULTS_FILE/$BUILD_DIR}"
echo $explanation
echo "------------------------------------------------------------------------"
printf "static\tshared\ttest\n"
echo "------------------------------------------------------------------------"

TEST_TIME_START=$($TIMER_COMMAND)
for NAME in `cat $TESTS_FILE`
do
    PRE_NAME="$TEST_DIR/`basename $NAME`"
    ST_NAME="`echo $PRE_NAME | sed 's/cc$/st-exe/'`"
    SH_NAME="`echo $PRE_NAME | sed 's/cc$/sh-exe/'`"

    if test @@enable_static@@ = yes; then
        test_file $NAME $ST_NAME "$ST_FLAG"
    else
        printf "x\t"
        printf "static skipped\n" >> $RESULTS_FILE
    fi
    if test @@enable_shared@@ = yes; then
        test_file $NAME $SH_NAME "$SH_FLAG"
    else
        printf "x\t"
        printf "shared skipped\n" >> $RESULTS_FILE
    fi
    printf "%s\n" "$NAME"

    echo "" >> $RESULTS_FILE
done
TEST_TIME_END=$($TIMER_COMMAND)


#
# 4: summary
#
# grep can count faster than we can...
total_failures=`expr ${shared_fail} + ${static_fail}`
total_successes=`expr ${shared_pass} + ${static_pass}`
resultstext="pass/fail results:  ${static_pass}/${static_fail} static + ${shared_pass}/${shared_fail} shared = ${total_successes}/${total_failures} total"
if [ $total_failures -eq 0 ]; then
    resultstext="${resultstext}, WIN WIN"
fi
sed -e "/^date:/a\\
$resultstext" $RESULTS_FILE > ${RESULTS_FILE}.tmp
mv ${RESULTS_FILE}.tmp $RESULTS_FILE

if [ $TEST_TIME_START -lt $TEST_TIME_END ]; then
    TEST_TIME=$[ $TEST_TIME_END - $TEST_TIME_START ]
    echo "testrun == $TEST_TIME seconds"
    echo "testrun == $TEST_TIME seconds" >> $RESULTS_FILE
fi

exit 0
@


1.1
log
@Initial revision
@
text
@@


1.1.1.1
log
@initial import of GCC 3.3 sources.  (this is the latest GCC 3.3.1
prerelease snapshot, 3.3.1-20030720, we will update to 3.3.1 when
it becomes available.)
@
text
@@