head	1.2;
access;
symbols
	perseant-exfatfs-base-20250801:1.2
	perseant-exfatfs-base-20240630:1.2
	cjep_sun2x:1.2.0.24
	cjep_sun2x-base:1.2
	cjep_staticlib_x-base1:1.2
	cjep_staticlib_x:1.2.0.22
	cjep_staticlib_x-base:1.2
	phil-wifi-20200421:1.2
	phil-wifi-20200411:1.2
	phil-wifi-20200406:1.2
	pgoyette-compat-merge-20190127:1.2
	pgoyette-compat-20190127:1.2
	pgoyette-compat-20190118:1.2
	pgoyette-compat-1226:1.2
	pgoyette-compat-1126:1.2
	pgoyette-compat-1020:1.2
	pgoyette-compat-0930:1.2
	pgoyette-compat-0906:1.2
	pgoyette-compat-0728:1.2
	pgoyette-compat-0625:1.2
	pgoyette-compat-0521:1.2
	pgoyette-compat-0502:1.2
	pgoyette-compat-0422:1.2
	pgoyette-compat-0415:1.2
	pgoyette-compat-0407:1.2
	pgoyette-compat-0330:1.2
	pgoyette-compat-0322:1.2
	pgoyette-compat-0315:1.2
	pgoyette-compat:1.2.0.20
	pgoyette-compat-base:1.2
	perseant-stdc-iso10646:1.2.0.18
	perseant-stdc-iso10646-base:1.2
	prg-localcount2-base3:1.2
	prg-localcount2-base2:1.2
	prg-localcount2-base1:1.2
	prg-localcount2:1.2.0.16
	prg-localcount2-base:1.2
	pgoyette-localcount-20170426:1.2
	bouyer-socketcan-base1:1.2
	pgoyette-localcount-20170320:1.2
	bouyer-socketcan:1.2.0.14
	bouyer-socketcan-base:1.2
	pgoyette-localcount-20170107:1.2
	pgoyette-localcount-20161104:1.2
	localcount-20160914:1.2
	pgoyette-localcount-20160806:1.2
	pgoyette-localcount-20160726:1.2
	pgoyette-localcount:1.2.0.12
	pgoyette-localcount-base:1.2
	netbsd-5-2-3-RELEASE:1.1.1.3
	netbsd-5-1-5-RELEASE:1.1.1.3
	yamt-pagecache-base9:1.2
	yamt-pagecache-tag8:1.2
	tls-earlyentropy:1.2.0.8
	tls-earlyentropy-base:1.2
	riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.2
	riastradh-drm2-base3:1.2
	netbsd-5-2-2-RELEASE:1.1.1.3
	netbsd-5-1-4-RELEASE:1.1.1.3
	netbsd-5-2-1-RELEASE:1.1.1.3
	netbsd-5-1-3-RELEASE:1.1.1.3
	agc-symver:1.2.0.10
	agc-symver-base:1.2
	tls-maxphys-base:1.2
	yamt-pagecache-base8:1.2
	netbsd-5-2:1.1.1.3.0.38
	yamt-pagecache-base7:1.2
	netbsd-5-2-RELEASE:1.1.1.3
	matt-nb6-plus-base:1.1.1.3
	matt-nb6-plus:1.2.0.6
	matt-nb6-plus-nbase:1.1.1.3
	netbsd-5-2-RC1:1.1.1.3
	yamt-pagecache-base6:1.2
	yamt-pagecache-base5:1.2
	yamt-pagecache-base4:1.2
	netbsd-5-1-2-RELEASE:1.1.1.3
	netbsd-5-1-1-RELEASE:1.1.1.3
	yamt-pagecache-base3:1.2
	yamt-pagecache-base2:1.2
	yamt-pagecache:1.2.0.4
	yamt-pagecache-base:1.2
	bouyer-quota2-nbase:1.2
	bouyer-quota2:1.2.0.2
	bouyer-quota2-base:1.2
	matt-nb5-mips64-premerge-20101231:1.1.1.3
	matt-nb5-pq3:1.1.1.3.0.36
	matt-nb5-pq3-base:1.1.1.3
	netbsd-5-1:1.1.1.3.0.34
	netbsd-5-1-RELEASE:1.1.1.3
	netbsd-5-1-RC4:1.1.1.3
	matt-nb5-mips64-k15:1.1.1.3
	netbsd-5-1-RC3:1.1.1.3
	netbsd-5-1-RC2:1.1.1.3
	netbsd-5-1-RC1:1.1.1.3
	netbsd-5-0-2-RELEASE:1.1.1.3
	matt-nb5-mips64-premerge-20091211:1.1.1.3
	matt-nb5-mips64-u2-k2-k4-k7-k8-k9:1.1.1.3
	matt-nb4-mips64-k7-u2a-k9b:1.1.1.3
	matt-nb5-mips64-u1-k1-k5:1.1.1.3
	matt-nb5-mips64:1.1.1.3.0.32
	netbsd-5-0-1-RELEASE:1.1.1.3
	jym-xensuspend-nbase:1.1.1.3
	netbsd-5-0:1.1.1.3.0.30
	netbsd-5-0-RELEASE:1.1.1.3
	netbsd-5-0-RC4:1.1.1.3
	netbsd-5-0-RC3:1.1.1.3
	netbsd-5-0-RC2:1.1.1.3
	jym-xensuspend:1.1.1.3.0.28
	jym-xensuspend-base:1.1.1.3
	netbsd-5-0-RC1:1.1.1.3
	netbsd-5:1.1.1.3.0.26
	netbsd-5-base:1.1.1.3
	matt-mips64-base2:1.1.1.3
	matt-mips64:1.1.1.3.0.24
	mjf-devfs2:1.1.1.3.0.22
	mjf-devfs2-base:1.1.1.3
	netbsd-4-0-1-RELEASE:1.1.1.3
	wrstuden-revivesa-base-3:1.1.1.3
	wrstuden-revivesa-base-2:1.1.1.3
	wrstuden-fixsa-newbase:1.1.1.3
	wrstuden-revivesa-base-1:1.1.1.3
	yamt-pf42-base4:1.1.1.3
	yamt-pf42-base3:1.1.1.3
	hpcarm-cleanup-nbase:1.1.1.3
	yamt-pf42-baseX:1.1.1.3
	yamt-pf42-base2:1.1.1.3
	wrstuden-revivesa:1.1.1.3.0.20
	wrstuden-revivesa-base:1.1.1.3
	yamt-pf42:1.1.1.3.0.18
	yamt-pf42-base:1.1.1.3
	keiichi-mipv6:1.1.1.3.0.16
	keiichi-mipv6-base:1.1.1.3
	matt-armv6-nbase:1.1.1.3
	matt-armv6-prevmlocking:1.1.1.3
	wrstuden-fixsa-base-1:1.1.1.3
	netbsd-4-0:1.1.1.3.0.14
	netbsd-4-0-RELEASE:1.1.1.3
	cube-autoconf:1.1.1.3.0.12
	cube-autoconf-base:1.1.1.3
	netbsd-4-0-RC5:1.1.1.3
	netbsd-4-0-RC4:1.1.1.3
	netbsd-4-0-RC3:1.1.1.3
	netbsd-4-0-RC2:1.1.1.3
	netbsd-4-0-RC1:1.1.1.3
	matt-armv6:1.1.1.3.0.10
	matt-armv6-base:1.1.1.3
	matt-mips64-base:1.1.1.3
	hpcarm-cleanup:1.1.1.3.0.8
	hpcarm-cleanup-base:1.1.1.3
	netbsd-3-1-1-RELEASE:1.1.1.2
	netbsd-3-0-3-RELEASE:1.1.1.2
	wrstuden-fixsa:1.1.1.3.0.6
	wrstuden-fixsa-base:1.1.1.3
	abandoned-netbsd-4-base:1.1.1.3
	abandoned-netbsd-4:1.1.1.3.0.2
	netbsd-3-1:1.1.1.2.0.6
	netbsd-3-1-RELEASE:1.1.1.2
	netbsd-3-0-2-RELEASE:1.1.1.2
	netbsd-3-1-RC4:1.1.1.2
	netbsd-3-1-RC3:1.1.1.2
	netbsd-3-1-RC2:1.1.1.2
	netbsd-3-1-RC1:1.1.1.2
	netbsd-4:1.1.1.3.0.4
	netbsd-4-base:1.1.1.3
	netbsd-3-0-1-RELEASE:1.1.1.2
	binutils-2-16-1:1.1.1.3
	netbsd-3-0:1.1.1.2.0.4
	netbsd-3-0-RELEASE:1.1.1.2
	netbsd-3-0-RC6:1.1.1.2
	netbsd-3-0-RC5:1.1.1.2
	netbsd-3-0-RC4:1.1.1.2
	netbsd-3-0-RC3:1.1.1.2
	netbsd-3-0-RC2:1.1.1.2
	netbsd-3-0-RC1:1.1.1.2
	netbsd-2-0-3-RELEASE:1.1.1.1
	netbsd-2-1:1.1.1.1.0.6
	netbsd-2-1-RELEASE:1.1.1.1
	netbsd-2-1-RC6:1.1.1.1
	netbsd-2-1-RC5:1.1.1.1
	netbsd-2-1-RC4:1.1.1.1
	netbsd-2-1-RC3:1.1.1.1
	netbsd-2-1-RC2:1.1.1.1
	netbsd-2-1-RC1:1.1.1.1
	netbsd-2-0-2-RELEASE:1.1.1.1
	netbsd-3:1.1.1.2.0.2
	netbsd-3-base:1.1.1.2
	netbsd-2-0-1-RELEASE:1.1.1.1
	netbsd-2:1.1.1.1.0.4
	netbsd-2-base:1.1.1.1
	binutils-2-15-20041204:1.1.1.2
	netbsd-2-0-RELEASE:1.1.1.1
	netbsd-2-0-RC5:1.1.1.1
	netbsd-2-0-RC4:1.1.1.1
	netbsd-2-0-RC3:1.1.1.1
	netbsd-2-0-RC2:1.1.1.1
	netbsd-2-0-RC1:1.1.1.1
	netbsd-2-0:1.1.1.1.0.2
	netbsd-2-0-base:1.1.1.1
	binutils-2-14:1.1.1.1
	FSF:1.1.1;
locks; strict;
comment	@# @;


1.2
date	2009.11.07.17.58.15;	author skrll;	state dead;
branches
	1.2.6.1;
next	1.1;

1.1
date	2003.11.26.11.31.15;	author mrg;	state Exp;
branches
	1.1.1.1;
next	;

1.2.6.1
date	2009.11.07.17.58.15;	author matt;	state dead;
branches;
next	1.2.6.2;

1.2.6.2
date	2012.11.20.18.39.23;	author matt;	state Exp;
branches;
next	;

1.1.1.1
date	2003.11.26.11.31.15;	author mrg;	state Exp;
branches;
next	1.1.1.2;

1.1.1.2
date	2004.12.08.09.52.50;	author mrg;	state Exp;
branches;
next	1.1.1.3;

1.1.1.3
date	2006.02.02.20.38.12;	author skrll;	state Exp;
branches;
next	;


desc
@@


1.2
log
@Remove old binutils.
@
text
@#   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
#   1999, 2000, 2001, 2002, 2003 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#

# This Makefile contains release scripts for gdb, binutils, and other
# packages which live in src.  It used to be part of the top level Makefile,
# but that turned out to be very messy and hard to maintain.

# This stuff really ought to be cleaned up and turned into something other
# than a Makefile.  As it is it's heavily recursive.

# This is the name of this script (!).  Needed due to horrible recursion.
SELF = src-release

SHELL = /bin/sh

BZIPPROG = bzip2
MD5PROG = md5sum

# pwd command to use.  Allow user to override default by setting PWDCMD in
# the environment to account for automounters.  The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# subprocesses and overrides the setting from the user's environment.
PWD = $${PWDCMD-pwd}

#
# Support for building net releases

# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
	config.guess config.if config.sub config move-if-change \
	mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \
	Makefile.def Makefile.tpl src-release

# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
	make-stds.texi standards.info* configure.texi configure.info* \
	configbuild.* configdev.* fdl.texi texi2pod.pl


# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question

# NOTE: No double quotes in the below.  It is used within shell script
# as VER="$(VER)"
VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif test -f $(TOOL)/version.in; then \
	  head -1 $(TOOL)/version.in; \
	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
	else \
	  echo VERSION; \
	fi`
PACKAGE = $(TOOL)

.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-djunpack \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) gdb-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	echo "==> Making $(PACKAGE)-$(VER)/"
	# Take out texinfo from a few places.
	sed -e '/^all\.normal: /s/\all-texinfo //' \
	    -e '/^	install-texinfo /d' \
	<Makefile.in >tmp
	mv -f tmp Makefile.in
	#
	./configure sun4
	$(MAKE) configure-host configure-target \
	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
	# Make links, and run "make diststuff" or "make info" when needed.
	rm -rf proto-toplev ; mkdir proto-toplev
	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
	for d in $$dirs ; do \
	  if [ -d $$d ]; then \
	    if [ ! -f $$d/Makefile ] ; then true ; \
	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
		(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
	        (cd $$d ; $(MAKE) info ) || exit 1 ; \
	    fi ; \
	    if [ -d $$d/proto-$$d.dir ]; then \
	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
	    else \
	      ln -s ../$$d proto-toplev/$$d ; \
	    fi ; \
	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
	done
	cd etc && $(MAKE) info
	$(MAKE) distclean
	#
	mkdir proto-toplev/etc
	(cd proto-toplev/etc; \
	 for i in $(ETC_SUPPORT); do \
		ln -s ../../etc/$$i . ; \
	 done)
	#
	# Take out texinfo from configurable dirs
	rm proto-toplev/configure.in
	sed -e '/^host_tools=/s/texinfo //' \
	    <configure.in >proto-toplev/configure.in
	#
	mkdir proto-toplev/texinfo
	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
	if test -r texinfo/util/tex3patch ; then \
	  mkdir proto-toplev/texinfo/util && \
	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
	else true; fi
	chmod -R og=u . || chmod og=u `find . -print`
	#
	# Create .gmo files from .po files.
	for f in `find . -name '*.po' -type f -print`; do \
	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
	done
	#
	-rm -f $(PACKAGE)-$(VER)
	ln -s proto-toplev $(PACKAGE)-$(VER)

.PHONY: do-tar
do-tar:
	echo "==> Making $(PACKAGE)-$(VER).tar"
	-rm -f $(PACKAGE)-$(VER).tar
	find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
		| tar cTfh - $(PACKAGE)-$(VER).tar

.PHONY: do-bz2
do-bz2:
	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
	-rm -f $(PACKAGE)-$(VER).tar.bz2
	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar

.PHONY: do-md5sum
do-md5sum:
	echo "==> Adding md5 checksum to top-level directory"
	cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
		| xargs $(MD5PROG) > ../md5.sum
	mv md5.sum proto-toplev

.PHONY: do-djunpack
do-djunpack:
	echo "==> Adding updated djunpack.bat to top-level directory"
	echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
	sed < djunpack.bat > djunpack.new \
		-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
	mv djunpack.new djunpack.bat
	-rm -f proto-toplev/djunpack.bat
	ln -s ../djunpack.bat proto-toplev/djunpack.bat

TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)

.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
	$(MAKE) -f $(SELF) taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"

# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
	$(MAKE) -f $(SELF) taz TOOL=binutils \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"

.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
	$(MAKE) -f $(SELF) taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"

GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
	$(MAKE) -f  $(SELF) taz TOOL=gnats \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"

.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"

DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
	$(MAKE) -f $(SELF) taz TOOL=dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"

.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"

.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"

.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"

.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean.  For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
	$(MAKE) -f $(SELF) taz TOOL=newlib \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
		DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib

.NOEXPORT:
MAKEOVERRIDES=
@


1.2.6.1
log
@file src-release was added on branch matt-nb6-plus on 2012-11-20 18:39:23 +0000
@
text
@d1 327
@


1.2.6.2
log
@Bring back GPL2 version of binutils.
@
text
@a0 336
#   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
#   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#

# This Makefile contains release scripts for gdb, binutils, and other
# packages which live in src.  It used to be part of the top level Makefile,
# but that turned out to be very messy and hard to maintain.

# This stuff really ought to be cleaned up and turned into something other
# than a Makefile.  As it is it's heavily recursive.

# This is the name of this script (!).  Needed due to horrible recursion.
SELF = src-release

SHELL = /bin/sh

BZIPPROG = bzip2
MD5PROG = md5sum

# pwd command to use.  Allow user to override default by setting PWDCMD in
# the environment to account for automounters.  The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# subprocesses and overrides the setting from the user's environment.
PWD = $${PWDCMD-pwd}

#
# Support for building net releases

# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
	config.guess config.sub config move-if-change \
	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \
	Makefile.def Makefile.tpl src-release

# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
	make-stds.texi standards.info* configure.texi configure.info* \
	configbuild.* configdev.* fdl.texi texi2pod.pl


# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question

# NOTE: No double quotes in the below.  It is used within shell script
# as VER="$(VER)"
VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif test -f $(TOOL)/version.in; then \
	  head -1 $(TOOL)/version.in; \
	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
	else \
	  echo VERSION; \
	fi`
PACKAGE = $(TOOL)

.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-djunpack \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f $(SELF) gdb-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f $(SELF) do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	echo "==> Making $(PACKAGE)-$(VER)/"
	# Take out texinfo from a few places.
	sed -e '/^all\.normal: /s/\all-texinfo //' \
	    -e '/^	install-texinfo /d' \
	<Makefile.in >tmp
	mv -f tmp Makefile.in
	#
	./configure i686-pc-linux-gnu
	$(MAKE) configure-host configure-target \
	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
	# Make links, and run "make diststuff" or "make info" when needed.
	rm -rf proto-toplev ; mkdir proto-toplev
	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
	for d in $$dirs ; do \
	  if [ -d $$d ]; then \
	    if [ ! -f $$d/Makefile ] ; then true ; \
	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
		(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
	        (cd $$d ; $(MAKE) info ) || exit 1 ; \
	    fi ; \
	    if [ -d $$d/proto-$$d.dir ]; then \
	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
	    else \
	      ln -s ../$$d proto-toplev/$$d ; \
	    fi ; \
	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
	done
	cd etc && $(MAKE) info
	$(MAKE) distclean
	# Kludge for pr gdb/708.  'configure' configures in
	# dejagnu/example/calc, but 'make distclean' does not clean in
	# dejagnu/example.  Someday somebody might fix this in dejagnu,
	# and then import a new dejagnu into sourceware.  Right now, a
	# couple of 'rm' commands will get the gdb snapshots working
	# again.  -- chastain 2003-08-15
	rm -f dejagnu/example/calc/config.status
	rm -f dejagnu/example/calc/config.log
	# Kludge for pr gdb/857.  intl/Makefile.in lacks a couple
	# of files in the distclean rule.  Zack W is planning to make
	# the gcc version of intl/ the master version and then push
	# that version to src soon.  See:
	#   http://sources.redhat.com/ml/binutils/2003-07/msg00032.html
	# After the src version of intl/ is upgraded, we can look at
	# moving this logic into intl/Makefile.in distclean rule
	# if it is still needed.  -- chastain 2003-09-12
	rm -f intl/config.cache
	rm -f intl/config.status
	rm -f intl/config.h
	rm -f intl/stamp-h
	#
	mkdir proto-toplev/etc
	(cd proto-toplev/etc; \
	 for i in $(ETC_SUPPORT); do \
		ln -s ../../etc/$$i . ; \
	 done)
	#
	# Take out texinfo from configurable dirs
	rm proto-toplev/configure.in
	sed -e '/^host_tools=/s/texinfo //' \
	    <configure.in >proto-toplev/configure.in
	#
	mkdir proto-toplev/texinfo
	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
	if test -r texinfo/util/tex3patch ; then \
	  mkdir proto-toplev/texinfo/util && \
	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
	else true; fi
	chmod -R og=u . || chmod og=u `find . -print`
	#
	# Create .gmo files from .po files.
	for f in `find . -name '*.po' -type f -print`; do \
	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
	done
	#
	-rm -f $(PACKAGE)-$(VER)
	ln -s proto-toplev $(PACKAGE)-$(VER)

CVS_NAMES= \( -name CVS -o -name '.cvsignore' \)

.PHONY: do-tar
do-tar:
	echo "==> Making $(PACKAGE)-$(VER).tar"
	-rm -f $(PACKAGE)-$(VER).tar
	find $(PACKAGE)-$(VER) -follow $(CVS_NAMES) -prune \
			-o -type f -print \
		| tar cTfh - $(PACKAGE)-$(VER).tar

.PHONY: do-bz2
do-bz2:
	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
	-rm -f $(PACKAGE)-$(VER).tar.bz2
	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar

.PHONY: do-md5sum
do-md5sum:
	echo "==> Adding md5 checksum to top-level directory"
	cd proto-toplev && find * -follow $(CVS_NAMES) -prune \
			-o -type f -print \
		| xargs $(MD5PROG) > ../md5.new
	-rm -f proto-toplev/md5.sum
	mv md5.new proto-toplev/md5.sum

.PHONY: do-djunpack
do-djunpack:
	echo "==> Adding updated djunpack.bat to top-level directory"
	echo - 's /gdb-[0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
	sed < djunpack.bat > djunpack.new \
		-e 's/gdb-[0-9][0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
	-rm -f proto-toplev/djunpack.bat
	mv djunpack.new proto-toplev/djunpack.bat

TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)

.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
	$(MAKE) -f $(SELF) taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"

# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep cpu
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
	$(MAKE) -f $(SELF) taz TOOL=binutils \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"

.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
	$(MAKE) -f $(SELF) taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"

GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
	$(MAKE) -f  $(SELF) taz TOOL=gnats \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"

.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"

DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
	$(MAKE) -f $(SELF) gdb-taz TOOL=dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
.PHONY: dejagnu.tar
dejagnu.tar: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
	$(MAKE) -f $(SELF) gdb-tar TOOL=dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"

.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"

.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"

.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"

.NOEXPORT:
MAKEOVERRIDES=
@


1.1
log
@Initial revision
@
text
@@


1.1.1.1
log
@initial import of binutils 2.14 into gnu/dist/binutils.
@
text
@@


1.1.1.2
log
@initial import of binutils 2.15 branch (20041204)
@
text
@d2 1
a2 1
#   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
d48 1
d139 1
a139 1
	./configure i686-pc-linux-gnu
a162 20
	# Kludge for pr gdb/708.  'configure' configures in
	# dejagnu/example/calc, but 'make distclean' does not clean in
	# dejagnu/example.  Someday somebody might fix this in dejagnu,
	# and then import a new dejagnu into sourceware.  Right now, a
	# couple of 'rm' commands will get the gdb snapshots working
	# again.  -- chastain 2003-08-15
	rm -f dejagnu/example/calc/config.status
	rm -f dejagnu/example/calc/config.log
	# Kludge for pr gdb/857.  intl/Makefile.in lacks a couple
	# of files in the distclean rule.  Zack W is planning to make
	# the gcc version of intl/ the master version and then push
	# that version to src soon.  See:
	#   http://sources.redhat.com/ml/binutils/2003-07/msg00032.html
	# After the src version of intl/ is upgraded, we can look at
	# moving this logic into intl/Makefile.in distclean rule
	# if it is still needed.  -- chastain 2003-09-12
	rm -f intl/config.cache
	rm -f intl/config.status
	rm -f intl/config.h
	rm -f intl/stamp-h
a190 2
CVS_NAMES= \( -name CVS -o -name '.cvsignore' \)

d195 1
a195 2
	find $(PACKAGE)-$(VER) -follow $(CVS_NAMES) -prune \
			-o -type f -print \
d207 1
a207 2
	cd proto-toplev && find * -follow $(CVS_NAMES) -prune \
			-o -type f -print \
d214 1
a214 1
	echo - 's /gdb-[0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
d216 1
a216 1
		-e 's/gdb-[0-9][0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
d233 1
a233 1
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep cpu
d267 1
a267 6
	$(MAKE) -f $(SELF) gdb-taz TOOL=dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
.PHONY: dejagnu.tar
dejagnu.tar: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
	$(MAKE) -f $(SELF) gdb-tar TOOL=dejagnu \
d307 19
@


1.1.1.3
log
@Import binutils 2.16.1.
@
text
@d47 1
a47 1
	config.guess config.sub config move-if-change \
d231 2
a232 3
		| xargs $(MD5PROG) > ../md5.new
	-rm -f proto-toplev/md5.sum
	mv md5.new proto-toplev/md5.sum
d240 1
d242 1
a242 1
	mv djunpack.new proto-toplev/djunpack.bat
d276 1
a276 1
GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim
d312 1
a312 1
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
@