head 1.80; access; symbols pkgsrc-2023Q4:1.79.0.2 pkgsrc-2023Q4-base:1.79 pkgsrc-2023Q3:1.77.0.4 pkgsrc-2023Q3-base:1.77 pkgsrc-2023Q2:1.77.0.2 pkgsrc-2023Q2-base:1.77 pkgsrc-2023Q1:1.76.0.2 pkgsrc-2023Q1-base:1.76 pkgsrc-2022Q4:1.74.0.4 pkgsrc-2022Q4-base:1.74 pkgsrc-2022Q3:1.74.0.2 pkgsrc-2022Q3-base:1.74 pkgsrc-2022Q2:1.73.0.12 pkgsrc-2022Q2-base:1.73 pkgsrc-2022Q1:1.73.0.10 pkgsrc-2022Q1-base:1.73 pkgsrc-2021Q4:1.73.0.8 pkgsrc-2021Q4-base:1.73 pkgsrc-2021Q3:1.73.0.6 pkgsrc-2021Q3-base:1.73 pkgsrc-2021Q2:1.73.0.4 pkgsrc-2021Q2-base:1.73 pkgsrc-2021Q1:1.73.0.2 pkgsrc-2021Q1-base:1.73 pkgsrc-2020Q4:1.72.0.2 pkgsrc-2020Q4-base:1.72 pkgsrc-2020Q3:1.71.0.2 pkgsrc-2020Q3-base:1.71 pkgsrc-2020Q2:1.70.0.10 pkgsrc-2020Q2-base:1.70 pkgsrc-2020Q1:1.70.0.6 pkgsrc-2020Q1-base:1.70 pkgsrc-2019Q4:1.70.0.8 pkgsrc-2019Q4-base:1.70 pkgsrc-2019Q3:1.70.0.4 pkgsrc-2019Q3-base:1.70 pkgsrc-2019Q2:1.70.0.2 pkgsrc-2019Q2-base:1.70 pkgsrc-2019Q1:1.69.0.8 pkgsrc-2019Q1-base:1.69 pkgsrc-2018Q4:1.69.0.6 pkgsrc-2018Q4-base:1.69 pkgsrc-2018Q3:1.69.0.4 pkgsrc-2018Q3-base:1.69 pkgsrc-2018Q2:1.69.0.2 pkgsrc-2018Q2-base:1.69 pkgsrc-2018Q1:1.68.0.2 pkgsrc-2018Q1-base:1.68 pkgsrc-2017Q4:1.67.0.10 pkgsrc-2017Q4-base:1.67 pkgsrc-2017Q3:1.67.0.8 pkgsrc-2017Q3-base:1.67 pkgsrc-2017Q2:1.67.0.4 pkgsrc-2017Q2-base:1.67 pkgsrc-2017Q1:1.67.0.2 pkgsrc-2017Q1-base:1.67 pkgsrc-2016Q4:1.65.0.4 pkgsrc-2016Q4-base:1.65 pkgsrc-2016Q3:1.65.0.2 pkgsrc-2016Q3-base:1.65 pkgsrc-2016Q2:1.64.0.4 pkgsrc-2016Q2-base:1.64 pkgsrc-2016Q1:1.64.0.2 pkgsrc-2016Q1-base:1.64 pkgsrc-2015Q4:1.63.0.2 pkgsrc-2015Q4-base:1.63 pkgsrc-2015Q3:1.62.0.2 pkgsrc-2015Q3-base:1.62 pkgsrc-2015Q2:1.61.0.6 pkgsrc-2015Q2-base:1.61 pkgsrc-2015Q1:1.61.0.4 pkgsrc-2015Q1-base:1.61 pkgsrc-2014Q4:1.61.0.2 pkgsrc-2014Q4-base:1.61 pkgsrc-2014Q3:1.60.0.10 pkgsrc-2014Q3-base:1.60 pkgsrc-2014Q2:1.60.0.8 pkgsrc-2014Q2-base:1.60 pkgsrc-2014Q1:1.60.0.6 pkgsrc-2014Q1-base:1.60 pkgsrc-2013Q4:1.60.0.4 pkgsrc-2013Q4-base:1.60 pkgsrc-2013Q3:1.60.0.2 pkgsrc-2013Q3-base:1.60 pkgsrc-2013Q2:1.59.0.2 pkgsrc-2013Q2-base:1.59 pkgsrc-2013Q1:1.57.0.2 pkgsrc-2013Q1-base:1.57 pkgsrc-2012Q4:1.55.0.2 pkgsrc-2012Q4-base:1.55 pkgsrc-2012Q3:1.54.0.6 pkgsrc-2012Q3-base:1.54 pkgsrc-2012Q2:1.54.0.4 pkgsrc-2012Q2-base:1.54 pkgsrc-2012Q1:1.54.0.2 pkgsrc-2012Q1-base:1.54 pkgsrc-2011Q4:1.53.0.2 pkgsrc-2011Q4-base:1.53 pkgsrc-2011Q3:1.52.0.6 pkgsrc-2011Q3-base:1.52 pkgsrc-2011Q2:1.52.0.4 pkgsrc-2011Q2-base:1.52 pkgsrc-2011Q1:1.52.0.2 pkgsrc-2011Q1-base:1.52 pkgsrc-2010Q4:1.51.0.4 pkgsrc-2010Q4-base:1.51 pkgsrc-2010Q3:1.51.0.2 pkgsrc-2010Q3-base:1.51 pkgsrc-2010Q2:1.50.0.2 pkgsrc-2010Q2-base:1.50 pkgsrc-2010Q1:1.48.0.2 pkgsrc-2010Q1-base:1.48 pkgsrc-2009Q4:1.47.0.4 pkgsrc-2009Q4-base:1.47 pkgsrc-2009Q3:1.47.0.2 pkgsrc-2009Q3-base:1.47 pkgsrc-2009Q2:1.46.0.2 pkgsrc-2009Q2-base:1.46 pkgsrc-2009Q1:1.45.0.2 pkgsrc-2009Q1-base:1.45 pkgsrc-2008Q4:1.44.0.2 pkgsrc-2008Q4-base:1.44 pkgsrc-2008Q3:1.43.0.12 pkgsrc-2008Q3-base:1.43 cube-native-xorg:1.43.0.10 cube-native-xorg-base:1.43 pkgsrc-2008Q2:1.43.0.8 pkgsrc-2008Q2-base:1.43 cwrapper:1.43.0.6 pkgsrc-2008Q1:1.43.0.4 pkgsrc-2008Q1-base:1.43 pkgsrc-2007Q4:1.43.0.2 pkgsrc-2007Q4-base:1.43 pkgsrc-2007Q3:1.42.0.6 pkgsrc-2007Q3-base:1.42 pkgsrc-2007Q2:1.42.0.4 pkgsrc-2007Q2-base:1.42 pkgsrc-2007Q1:1.42.0.2 pkgsrc-2007Q1-base:1.42 pkgsrc-2006Q4:1.40.0.6 pkgsrc-2006Q4-base:1.40 pkgsrc-2006Q3:1.40.0.4 pkgsrc-2006Q3-base:1.40 pkgsrc-2006Q2:1.40.0.2 pkgsrc-2006Q2-base:1.40 pkgsrc-2006Q1:1.39.0.2 pkgsrc-2006Q1-base:1.39 pkgsrc-2005Q4:1.36.0.2 pkgsrc-2005Q4-base:1.36 pkgsrc-2005Q3:1.34.0.4 pkgsrc-2005Q3-base:1.34 pkgsrc-2005Q2:1.34.0.2 pkgsrc-2005Q2-base:1.34 pkgsrc-2005Q1:1.33.0.2 pkgsrc-2005Q1-base:1.33 pkgsrc-2004Q4:1.32.0.2 pkgsrc-2004Q4-base:1.32 pkgsrc-2004Q3:1.31.0.2 pkgsrc-2004Q3-base:1.31 pkgsrc-2004Q2:1.30.0.2 pkgsrc-2004Q2-base:1.30 pkgsrc-2004Q1:1.29.0.2 pkgsrc-2004Q1-base:1.29 pkgsrc-2003Q4:1.28.0.2 pkgsrc-2003Q4-base:1.28 netbsd-1-6-1:1.22.0.2 netbsd-1-6-1-base:1.22 netbsd-1-6:1.20.0.8 netbsd-1-6-RELEASE-base:1.20 pkgviews:1.20.0.4 pkgviews-base:1.20 buildlink2:1.20.0.2 buildlink2-base:1.20 netbsd-1-5-PATCH003:1.20 netbsd-1-5-PATCH001:1.14 netbsd-1-5-RELEASE:1.10 netbsd-1-4-PATCH003:1.10 netbsd-1-4-PATCH002:1.9 comdex-fall-1999:1.7 netbsd-1-4-PATCH001:1.5 netbsd-1-4-RELEASE:1.4 pkgsrc-base:1.1.1.1 TNF:1.1.1; locks; strict; comment @# @; 1.80 date 2023.12.30.12.08.20; author zafer; state Exp; branches; next 1.79; commitid nO8v8zsvAkVP7uSE; 1.79 date 2023.11.12.13.23.58; author wiz; state Exp; branches; next 1.78; commitid SjpNXQIV5XeZ3kME; 1.78 date 2023.10.21.17.11.40; author gdt; state Exp; branches; next 1.77; commitid Sr0Nb6aaZLDw2wJE; 1.77 date 2023.05.22.11.39.04; author wiz; state Exp; branches; next 1.76; commitid wHwCxvZphlIb6XpE; 1.76 date 2023.01.29.21.18.06; author ryoon; state Exp; branches; next 1.75; commitid QL7aBXsBGmQvUtbE; 1.75 date 2023.01.03.17.38.25; author wiz; state Exp; branches; next 1.74; commitid vvAqE6UmuqFFx78E; 1.74 date 2022.07.27.18.56.42; author wiz; state Exp; branches; next 1.73; commitid eUsa6UoDh5T88zND; 1.73 date 2021.02.20.14.37.23; author bsiegert; state Exp; branches; next 1.72; commitid Y1ut7Lr1GxcmtsIC; 1.72 date 2020.11.26.16.08.13; author bsiegert; state Exp; branches; next 1.71; commitid hGiSzm4C0iyPJpxC; 1.71 date 2020.08.17.20.20.23; author leot; state Exp; branches; next 1.70; commitid ybGS4iX9Fz8imskC; 1.70 date 2019.05.23.19.23.21; author rillig; state Exp; branches; next 1.69; commitid aWlQW8HYUUFCAmoB; 1.69 date 2018.04.21.13.38.07; author wiz; state Exp; branches; next 1.68; commitid 0QhVHzZeuQ3OrjzA; 1.68 date 2018.03.12.11.17.48; author wiz; state Exp; branches; next 1.67; commitid Mv60lx3Uo1UqW9uA; 1.67 date 2017.02.28.15.20.11; author ryoon; state Exp; branches; next 1.66; commitid VGStpD9ALmxKpJHz; 1.66 date 2017.01.19.18.52.29; author agc; state Exp; branches; next 1.65; commitid ufZDMu4cgHZdRBCz; 1.65 date 2016.08.03.10.23.32; author adam; state Exp; branches; next 1.64; commitid AsJCxHnjaXbduQgz; 1.64 date 2016.01.22.06.12.52; author zafer; state Exp; branches; next 1.63; commitid xnE1nPqG7XfglTRy; 1.63 date 2015.11.18.14.19.55; author ryoon; state Exp; branches; next 1.62; commitid xxkPK0OWudQL7AJy; 1.62 date 2015.06.30.09.57.42; author ryoon; state Exp; branches; next 1.61; commitid jeIUM6gvNqaTcrry; 1.61 date 2014.10.09.14.07.13; author wiz; state Exp; branches; next 1.60; commitid fBDATFVmQ3454xTx; 1.60 date 2013.09.04.12.31.26; author obache; state Exp; branches; next 1.59; commitid NW7BZOzY687vo74x; 1.59 date 2013.06.04.22.17.16; author tron; state Exp; branches; next 1.58; commitid wB5zURIqYs6HAlSw; 1.58 date 2013.06.03.10.06.10; author wiz; state Exp; branches; next 1.57; commitid kGMtnUPdN4amz9Sw; 1.57 date 2013.02.16.11.24.56; author wiz; state Exp; branches; next 1.56; 1.56 date 2013.01.26.21.39.05; author adam; state Exp; branches; next 1.55; 1.55 date 2012.10.28.06.31.08; author asau; state Exp; branches; next 1.54; 1.54 date 2012.01.18.14.49.30; author adam; state Exp; branches; next 1.53; 1.53 date 2011.11.01.06.02.47; author sbd; state Exp; branches; next 1.52; 1.52 date 2011.01.13.13.39.41; author wiz; state Exp; branches; next 1.51; 1.51 date 2010.09.16.08.06.18; author adam; state Exp; branches; next 1.50; 1.50 date 2010.06.13.22.45.35; author wiz; state Exp; branches; next 1.49; 1.49 date 2010.06.02.13.13.14; author adam; state Exp; branches; next 1.48; 1.48 date 2010.01.18.09.59.32; author wiz; state Exp; branches; next 1.47; 1.47 date 2009.08.26.19.58.28; author sno; state Exp; branches; next 1.46; 1.46 date 2009.05.01.15.27.04; author zafer; state Exp; branches; next 1.45; 1.45 date 2009.01.09.13.17.04; author obache; state Exp; branches; next 1.44; 1.44 date 2008.12.01.09.45.55; author tonnerre; state Exp; branches; next 1.43; 1.43 date 2007.11.16.11.50.48; author martin; state Exp; branches; next 1.42; 1.42 date 2007.02.22.19.27.24; author wiz; state Exp; branches; next 1.41; 1.41 date 2007.01.07.09.14.15; author rillig; state Exp; branches; next 1.40; 1.40 date 2006.04.17.13.46.52; author wiz; state Exp; branches; next 1.39; 1.39 date 2006.03.04.21.31.04; author jlam; state Exp; branches; next 1.38; 1.38 date 2006.02.05.23.11.29; author joerg; state Exp; branches; next 1.37; 1.37 date 2005.12.29.06.22.24; author jlam; state Exp; branches; next 1.36; 1.36 date 2005.12.05.23.55.23; author rillig; state Exp; branches; next 1.35; 1.35 date 2005.10.23.19.50.55; author heinz; state Exp; branches; next 1.34; 1.34 date 2005.04.11.21.48.02; author tv; state Exp; branches; next 1.33; 1.33 date 2004.12.28.08.02.33; author minskim; state Exp; branches; next 1.32; 1.32 date 2004.10.03.00.18.27; author tv; state Exp; branches; next 1.31; 1.31 date 2004.06.20.21.52.08; author xtraeme; state Exp; branches; next 1.30; 1.30 date 2004.04.09.00.39.20; author minskim; state Exp; branches; next 1.29; 1.29 date 2004.01.20.12.28.00; author agc; state Exp; branches; next 1.28; 1.28 date 2003.07.17.22.56.07; author grant; state Exp; branches; next 1.27; 1.27 date 2003.07.01.14.32.59; author jwise; state Exp; branches; next 1.26; 1.26 date 2003.06.23.11.20.39; author adam; state Exp; branches; next 1.25; 1.25 date 2003.06.02.01.15.58; author jschauma; state Exp; branches; next 1.24; 1.24 date 2003.03.29.12.42.56; author jmmv; state Exp; branches; next 1.23; 1.23 date 2003.03.22.03.11.29; author wiz; state Exp; branches; next 1.22; 1.22 date 2003.01.28.22.04.33; author jlam; state Exp; branches; next 1.21; 1.21 date 2002.08.25.21.52.25; author jlam; state Exp; branches; next 1.20; 1.20 date 2002.03.13.17.37.53; author fredb; state Exp; branches 1.20.2.1; next 1.19; 1.19 date 2002.02.24.14.55.59; author veego; state Exp; branches; next 1.18; 1.18 date 2002.02.19.13.09.37; author martti; state Exp; branches; next 1.17; 1.17 date 2001.12.02.06.56.47; author jlam; state Exp; branches; next 1.16; 1.16 date 2001.12.01.15.08.02; author jlam; state Exp; branches; next 1.15; 1.15 date 2001.12.01.02.26.24; author briggs; state Exp; branches; next 1.14; 1.14 date 2001.05.05.12.12.14; author wiz; state Exp; branches; next 1.13; 1.13 date 2001.02.17.17.22.46; author wiz; state Exp; branches; next 1.12; 1.12 date 2000.11.14.00.01.27; author briggs; state Exp; branches; next 1.11; 1.11 date 2000.10.18.16.41.23; author mjl; state Exp; branches; next 1.10; 1.10 date 2000.04.26.03.21.35; author hubertf; state Exp; branches; next 1.9; 1.9 date 99.11.29.04.06.27; author explorer; state Exp; branches; next 1.8; 1.8 date 99.11.01.03.38.18; author jlam; state Exp; branches; next 1.7; 1.7 date 99.08.27.09.06.37; author agc; state Exp; branches; next 1.6; 1.6 date 99.08.26.20.25.43; author mjl; state Exp; branches; next 1.5; 1.5 date 99.05.03.20.25.37; author tv; state Exp; branches; next 1.4; 1.4 date 99.04.09.20.19.11; author mjl; state Exp; branches; next 1.3; 1.3 date 99.03.30.22.41.41; author mjl; state Exp; branches; next 1.2; 1.2 date 99.03.23.21.16.06; author mjl; state Exp; branches; next 1.1; 1.1 date 98.11.07.13.22.53; author frueauf; state Exp; branches 1.1.1.1; next ; 1.20.2.1 date 2002.06.30.06.24.36; author jlam; state Exp; branches; next ; 1.1.1.1 date 98.11.07.13.22.53; author frueauf; state Exp; branches; next ; desc @@ 1.80 log @update homepage and master site @ text @# $NetBSD: Makefile,v 1.79 2023/11/12 13:23:58 wiz Exp $ DISTNAME= webalizer-2.23-08-src PKGNAME= webalizer-2.23.8 PKGREVISION= 7 CATEGORIES= www MASTER_SITES= # EXTRACT_SUFX= .tar.bz2 MAINTAINER= pkgsrc-users@@NetBSD.org HOMEPAGE= https://webalizer.net/ COMMENT= Web server log file analysis program WRKSRC= ${WRKDIR}/${DISTNAME:S/-src//} BDB_ACCEPTED= db4 db5 GNU_CONFIGURE= yes CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR} CONFIGURE_ARGS+= --enable-dns EGDIR= ${PREFIX}/share/examples CONF_FILES= ${EGDIR}/webalizer.conf.sample ${PKG_SYSCONFDIR}/webalizer.conf DOC_SUBDIR= share/doc/webalizer DOCDIR= ${PREFIX}/${DOC_SUBDIR} DOCFILES= CHANGES Copyright DNS.README README README.FIRST INSTALLATION_DIRS= bin ${PKGMANDIR}/man1 share/examples ${DOC_SUBDIR} SUBST_CLASSES+= webalizer SUBST_STAGE.webalizer= post-build SUBST_FILES.webalizer= sample.conf webalizer.1 SUBST_VARS.webalizer= PKG_SYSCONFDIR PKG_OPTIONS_VAR= PKG_OPTIONS.webalizer PKG_SUPPORTED_OPTIONS= bzip2 geoip .include "../../mk/bsd.options.mk" .if !empty(PKG_OPTIONS:Mbzip2) . include "../../archivers/bzip2/buildlink3.mk" CONFIGURE_ARGS+= --enable-bz2 .endif # option bzip2 .if !empty(PKG_OPTIONS:Mgeoip) . include "../../net/GeoIP/buildlink3.mk" CONFIGURE_ARGS+= --enable-geoip CONFIGURE_ARGS+= --with-geodb=${BUILDLINK_PREFIX.GeoIP}/share/GeoIP .endif # option geoip post-install: .for f in ${DOCFILES} ${INSTALL_DATA} ${WRKSRC}/${f} ${DESTDIR}${DOCDIR}/${f} .endfor BUILDLINK_TRANSFORM+= l:db:${BDB_TYPE} .include "../../devel/zlib/buildlink3.mk" .include "../../graphics/gd/buildlink3.mk" .include "../../graphics/png/buildlink3.mk" .include "../../mk/bdb.buildlink3.mk" .include "../../mk/bsd.pkg.mk" @ 1.79 log @*: revebump for new brotli option for freetype2 Addresses PR 57693 @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.78 2023/10/21 17:11:40 gdt Exp $ d7 1 a7 1 MASTER_SITES= ftp://ftp.mrunix.net/pub/webalizer/ d11 1 a11 1 HOMEPAGE= http://www.webalizer.org/ @ 1.78 log @recursive revbump for tiff update @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.77 2023/05/22 11:39:04 wiz Exp $ d5 1 a5 1 PKGREVISION= 6 @ 1.77 log @*: recursive bump for libimagequant 4.x @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.76 2023/01/29 21:18:06 ryoon Exp $ d5 1 a5 1 PKGREVISION= 5 @ 1.76 log @*: Recursive revbup from graphics/freetype2 @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.75 2023/01/03 17:38:25 wiz Exp $ d5 1 a5 1 PKGREVISION= 4 @ 1.75 log @*: recursive bump for tiff shlib major bump @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.74 2022/07/27 18:56:42 wiz Exp $ d5 1 a5 1 PKGREVISION= 3 @ 1.74 log @webalizer: fix png library name. Add explicit png buildlink3.mk inclusion, since this uses png directly. Bump PKGREVISION. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.73 2021/02/20 14:37:23 bsiegert Exp $ d5 1 a5 1 PKGREVISION= 2 @ 1.73 log @webalizer: fix crashes Use memmove instead of memcpy with overlapping arguments. Patch from Adrian Immanuel Kiess in PR pkg/55809. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.72 2020/11/26 16:08:13 bsiegert Exp $ d5 1 a5 1 PKGREVISION= 1 d56 1 @ 1.72 log @Update webalizer to latest 2.23-08 (from 2013). Perhaps this contains a fix for the buffer overflows seen in PR pkg/55809. Fixes: o Fix sporadic eol problem with some IIS/W3C logs o Fix compiler directive syntax error (broke some 64 bit systems) Changes/Additions: o Modest speed improvements in hash table code @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.71 2020/08/17 20:20:23 leot Exp $ d5 1 @ 1.71 log @*: revbump after fontconfig bl3 changes (libuuid removal) @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.70 2019/05/23 19:23:21 rillig Exp $ d3 2 a4 3 DISTNAME= webalizer-2.21-02-src PKGNAME= webalizer-2.21.2 PKGREVISION= 16 @ 1.70 log @all: replace SUBST_SED with the simpler SUBST_VARS pkglint -Wall -r --only "substitution command" -F With manual review and indentation fixes since pkglint doesn't get that part correct in every case. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.69 2018/04/21 13:38:07 wiz Exp $ d5 1 a5 1 PKGREVISION= 15 @ 1.69 log @*: gd.tuwien.ac.at/ftp.tuwien.ac.at is gone, remove it from various mastersites @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.68 2018/03/12 11:17:48 wiz Exp $ d31 1 a31 1 SUBST_SED.webalizer= -e "s|@@PKG_SYSCONFDIR@@|${PKG_SYSCONFDIR}|g" @ 1.68 log @Recursive bumps for fontconfig and libzip dependency changes. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.67 2017/02/28 15:20:11 ryoon Exp $ a7 1 MASTER_SITES+= http://gd.tuwien.ac.at/infosys/logeval/webalizer/ @ 1.67 log @Recursive revbump from graphics/libwebp @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.66 2017/01/19 18:52:29 agc Exp $ d5 1 a5 1 PKGREVISION= 14 @ 1.66 log @Convert all occurrences (353 by my count) of MASTER_SITES= site1 \ site2 style continuation lines to be simple repeated MASTER_SITES+= site1 MASTER_SITES+= site2 lines. As previewed on tech-pkg. With thanks to rillig for fixing pkglint accordingly. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.65 2016/08/03 10:23:32 adam Exp $ d5 1 a5 1 PKGREVISION= 13 @ 1.65 log @Revbump after graphics/gd update @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.64 2016/01/22 06:12:52 zafer Exp $ d7 2 a8 2 MASTER_SITES= ftp://ftp.mrunix.net/pub/webalizer/ \ http://gd.tuwien.ac.at/infosys/logeval/webalizer/ @ 1.64 log @remove one dead mirror (not resolved). @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.63 2015/11/18 14:19:55 ryoon Exp $ d5 1 a5 1 PKGREVISION= 12 @ 1.63 log @Recursive revbump from multimedia/libvpx @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.62 2015/06/30 09:57:42 ryoon Exp $ a7 1 http://webalizer.linux-mirror.org/pub/webalizer/ \ @ 1.62 log @Recursive revbump from pkgsrc/multimedia/libvpx. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.61 2014/10/09 14:07:13 wiz Exp $ d5 1 a5 1 PKGREVISION= 11 @ 1.61 log @Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.60 2013/09/04 12:31:26 obache Exp $ d5 1 a5 1 PKGREVISION= 10 @ 1.60 log @recursive bump from graphics/gd shlib major bump. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.59 2013/06/04 22:17:16 tron Exp $ a15 2 PKG_INSTALLATION_TYPES= overwrite pkgviews @ 1.59 log @Try to fix the fallout caused by the fix for PR pkg/47882. Part 3: Recursively bump package revisions again after the "freetype2" and "fontconfig" handling was fixed. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.58 2013/06/03 10:06:10 wiz Exp $ d5 1 a5 1 PKGREVISION= 9 @ 1.58 log @Bump freetype2 and fontconfig dependencies to current pkgsrc versions, to address issues with NetBSD-6(and earlier)'s fontconfig not being new enough for pango. While doing that, also bump freetype2 dependency to current pkgsrc version. Suggested by tron in PR 47882 @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.57 2013/02/16 11:24:56 wiz Exp $ d5 1 a5 1 PKGREVISION= 8 @ 1.57 log @Recursive bump for png-1.6. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.56 2013/01/26 21:39:05 adam Exp $ d5 1 a5 1 PKGREVISION= 7 @ 1.56 log @Revbump after graphics/jpeg and textproc/icu @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.55 2012/10/28 06:31:08 asau Exp $ d5 1 a5 1 PKGREVISION= 6 @ 1.55 log @Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.54 2012/01/18 14:49:30 adam Exp $ d5 1 a5 1 PKGREVISION= 5 @ 1.54 log @Revbump after db5 update @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.53 2011/11/01 06:02:47 sbd Exp $ a16 1 PKG_DESTDIR_SUPPORT= user-destdir @ 1.53 log @Recursive bump for graphics/freetype2 buildlink addition. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.52 2011/01/13 13:39:41 wiz Exp $ d5 1 a5 1 PKGREVISION= 4 @ 1.52 log @png shlib name changed for png>=1.5.0, so bump PKGREVISIONs. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.51 2010/09/16 08:06:18 adam Exp $ d5 1 a5 1 PKGREVISION= 3 @ 1.51 log @Revbump after updating databases/db5 @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.50 2010/06/13 22:45:35 wiz Exp $ d5 1 a5 1 PKGREVISION= 2 @ 1.50 log @Bump PKGREVISION for libpng shlib name change. Also add some patches to remove use of deprecated symbols and fix other problems when looking for or compiling against libpng-1.4.x. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.49 2010/06/02 13:13:14 adam Exp $ d5 1 a5 1 PKGREVISION= 1 @ 1.49 log @Changes 2.21.02: Fixes: * Added missing memory deallocation call in DNS lookup code. * Minor fixes to configure script Changes/Additions: * Added "YearTotals" config option for main index page totals @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.48 2010/01/18 09:59:32 wiz Exp $ d5 1 @ 1.48 log @Second try at jpeg-8 recursive PKGREVISION bump. @ text @d1 1 a1 2 # $NetBSD: Makefile,v 1.47 2009/08/26 19:58:28 sno Exp $ # d3 2 a4 3 DISTNAME= webalizer-2.20-03-src PKGNAME= webalizer-2.20.3 PKGREVISION= 2 d19 2 a20 1 GNU_CONFIGURE= YES d57 1 a57 2 BUILDLINK_TRANSFORM+= l:db:db4 .include "../../databases/db4/buildlink3.mk" d60 1 @ 1.47 log @bump revision because of graphics/jpeg update @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.46 2009/05/01 15:27:04 zafer Exp $ d6 1 a6 1 PKGREVISION= 1 @ 1.46 log @add one more mirror. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.45 2009/01/09 13:17:04 obache Exp $ d6 1 @ 1.45 log @Update Webalizer to 2.20.3. Pkgsrc changes: * Change HOMEPAGE to redirected one. * Add DESTDIR support (should be since 2.20.1) * Change to use --sysconfdir (should be since 2.20.1) * Add bzip2 support. * GeoIP support was added since 2.20.1, no need extra pach files anymore. Fixes PR 40344. * Changed to use db4 APIs since 2.20.1, dns support back again. * gettext and freetype2 are not used directly, remove dependency. * zlib is used directly, add dependency. * Honor PKGMANDIR. * Change complex PLIST handlings for docs to simply. * Change not to use prefix '_' in package specific variables. Upstream changes: This fixes a missing memory dealocation call in the DNS lookup code, a kludge to handle largefile support in the current zlib compression code on some platforms, and some minor configure script corrections. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.44 2008/12/01 09:45:55 tonnerre Exp $ d8 1 @ 1.44 log @Update webalizer to version 2.20-01. Other than 2.01-10, this version actually still exists. Changes since 2.01-10: * Fixed problem with timing totals. * Fixed referrer linking to avoid possible xss injection. * Fixed month change detection error that caused incorrect report dates when logs had a 'gap' longer than a year. * Fixed buffer overrun possibility in parsing code and user agent mangle logic. * Added symbolic link checks for file I/O to prevent possible privilege escalation exploits. Disallows reading from or writing to any file that is a symlink. Thanks to Julien Danjou. * Added code to preserve the history and incremental data files in the event of a crash before writing to them completely. Thanks to Robert Millan for the idea and initial code. * Added native geolocation services, which fully supports both IPv4 and IPv6 lookups. Adds the configuration keywords 'GeoDB' and 'GeoDBDatabase' along with the '-j' and '-J' command line options. * Added 'wcmgr', "The Webalizer (DNS) Cache file Manager" to the distribution to provide cache file maintenance. See the supplied man page for a description and usage information. * Changed history code and main index page to allow for more than 12 months of reports to be displayed. Added the config keywords 'IndexMonths' (-K command line option), 'GraphMonths' (-k command line option) and 'YearHeaders' to control how index is displayed. * Changed Berkeley DB code to use current 4.x APIs. * Added support for bzip2 compressed log files (.bz2) as a compile time option (--enable-bz2). If enabled, bzipped files will be decompressed automatically during processing. * Added support for W3C formatted logs. Based on code submitted by Klaus Reimer. * Added GeoIP support as compile time option (--enable-geoip). Adds 'GeoIP' and 'GeoIPDatabase' config keywords, '-w' and '-W' command line options. (http://www.maxmind.com/) * Added IPv6 support. Based on initial code by Jose Carlos Meneiros and modified to support Solaris and other problematic platforms. * Added 'CacheIPs' config option to allow saving unresolved addresses in the DNS cache. * Added 'CacheTTL' config option which allows the DNS cache time to live (TTL) value to be specified at run-time. * Added 'SearchCaseI' config option to specify if search strings should be treated as case insensitive or not. The default value, 'yes', causes search strings to be treated as case insensitive. * Added 'HTAccess' config option. Allows writing a default .htaccess file to the output directory. * Added ability to display flags in the top country table. Adds the config keywords 'CountryFlags' and 'FlagDir', and -z command line option. * Added 'StripCGI' config option to configure how CGI variables on the end of URLs are treated (can now be stripped or left in place). * Added 'DefaultIndex' config option to enable/disable the use of "index." as a default index name to be stripped from the end of URLs. * Added 'TrimSquidURL' config option to allow squid log URLs to be reduced in granularity by a user definable amount. Thanks to code submitted by Stuart Gall. * Added 'OmitPage' config option (and the '-O' command line switch) to prevent specified URLs from being counted as pages even if they otherwise would be. Thanks to code submitted by Adam Morton. * Added 'IgnoreState' config option (and the -b command line switch) to allow ignoring any existing incremental data file (similar to the IgnoreHist/-i option). * Changed logic to always generate summary report (index.html), even if no records were processed. * Added color support to allow changing graph colors. Based on the Webalizer-usecolor code submitted by Benoit Rouits. Adds 11 new config options, see the README file for complete descriptions. * Added language 'lang=' specification in generated HTML files. * Added 'LinkReferrer' config option to allow/disallow links in the top referrers table. * Added 'PagePrefix' config option to allow URL prefix matches to be counted as pages, regardless of file extension or type. Thanks to code submitted by Remco Van de Meent. * Enabled large file support (LFS) to support logs greater than 2Gb in size on systems that support LFS. Also increased the size of most internal counters to handle larger sites. * Minor changes to generated HTML output * Updated language files country codes for current IANA TLDs * Changed the meaning of the -v command line switch. It now causes verbose information to be displayed at run-time (Informational and Debug messages). * Changed Group* config options to allow a quoted string for the match string. This allows spaces to be embedded in the string. * Changed log record parsing logic to allow spaces in URLs. * Made configuration keywords, boolean configuration values (yes/no), and log file types case insensitive. Also fixed defaults for invalid values to reflect documented defaults. * Changed configure script to use --sysconfdir to specify the location of the default webalizer.conf configuration file. Also added support for DESTDIR during install to aid binary package builds. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.43 2007/11/16 11:50:48 martin Exp $ d4 2 a5 2 DISTNAME= webalizer-2.20-01-src PKGNAME= webalizer-2.20.1 d12 1 a12 1 HOMEPAGE= http://www.mrunix.net/webalizer/ d16 1 d20 1 a20 1 CONFIGURE_ARGS+= --with-etcdir=${PKG_SYSCONFDIR:Q} a21 1 CONFIGURE_ENV+= ac_cv_GDLIB=${BUILDLINK_PREFIX.gd}/include d25 3 a27 3 _DOC_SUBDIR= share/doc/webalizer _DOCDIR= ${PREFIX}/${_DOC_SUBDIR} _DOCFILES= CHANGES Copyright DNS.README README README.FIRST d29 1 a29 4 PLIST_ADD= ${WRKSRC}/.PLIST_ADD PLIST_SRC= ${PKGDIR}/PLIST ${PLIST_ADD} INSTALLATION_DIRS= bin ${PKGMANDIR}/man1 share/examples ${_DOC_SUBDIR} d37 1 a37 1 PKG_SUPPORTED_OPTIONS= geoip d40 5 d46 1 a46 10 # we want the patch archive extracted... _GEOPATCH= geolizer_2.01-10-patch DISTFILES= ${DISTNAME}${EXTRACT_SUFX} DISTFILES+= ${_GEOPATCH}.20050520.tar.gz # ... _and_ the patch applied automatically PATCHFILES= ${_GEOPATCH}.20050520.tar.gz PATCH_SITES= http://sysd.org/proj/ PATCH_DIST_CAT= ${GZCAT} $$patchfile | ${TAR} -Oxf - "geolizer*/geolizer.patch" PATCH_DIST_STRIP= -p1 d48 1 a48 9 _DOCFILES+= GeoIP.README GeoIP.INSTALL post-extract: cd ${WRKDIR}/${_GEOPATCH} && \ ${MV} INSTALL ${WRKSRC}/GeoIP.INSTALL &&\ ${MV} GeoIP.README ${WRKSRC} . include "../../net/GeoIP/buildlink3.mk" d52 7 a58 12 @@${TEST} -r ${PLIST_ADD} && ${RM} ${PLIST_ADD} ; : @@cd ${WRKSRC}; \ for f in ${_DOCFILES}; do \ ${INSTALL_DATA} $$f ${_DOCDIR}/$$f; \ ${ECHO} "${_DOC_SUBDIR}/$$f" >> ${PLIST_ADD}; \ done; @@${ECHO} "@@dirrm ${_DOC_SUBDIR}" >> ${PLIST_ADD}; BDB_ACCEPTED=db1 db2 .include "../../mk/bdb.buildlink3.mk" .include "../../devel/gettext-lib/buildlink3.mk" .include "../../graphics/freetype2/buildlink3.mk" @ 1.43 log @The pkg did not fully work on archs with no db1 builtin, as discussed on tech-pkg. Thanks to various people for all the input. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.42 2007/02/22 19:27:24 wiz Exp $ d4 2 a5 3 DISTNAME= webalizer-2.01-10-src PKGNAME= webalizer-2.1.10 PKGREVISION= 7 @ 1.42 log @Whitespace cleanup, courtesy of pkglint. Patch provided by Sergey Svishchev in private mail. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.41 2007/01/07 09:14:15 rillig Exp $ d6 1 a6 1 PKGREVISION= 6 d76 2 @ 1.41 log @Mechanically replaced man/* with ${PKGMANDIR}/* in the definition of INSTALLATION_DIRS, as well as all occurrences of ${PREFIX}/man with ${PREFIX}/${PKGMANDIR}. Fixes PR 35265, although I did not use the patch provided therein. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.40 2006/04/17 13:46:52 wiz Exp $ d19 1 a19 1 GNU_CONFIGURE= YES d41 1 a41 1 PKG_SUPPORTED_OPTIONS= geoip @ 1.40 log @Bump BUILDLINK_ABI_DEPENDS.png and PKGREVISION for png-1.2.9nb2 update. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.39 2006/03/04 21:31:04 jlam Exp $ d33 1 a33 1 INSTALLATION_DIRS= bin man/man1 share/examples ${_DOC_SUBDIR} @ 1.39 log @Point MAINTAINER to pkgsrc-users@@NetBSD.org in the case where no developer is officially maintaining the package. The rationale for changing this from "tech-pkg" to "pkgsrc-users" is that it implies that any user can try to maintain the package (by submitting patches to the mailing list). Since the folks most likely to care about the package are the folks that want to use it or are already using it, this would leverage the energy of users who aren't developers. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.38 2006/02/05 23:11:29 joerg Exp $ d6 1 a6 1 PKGREVISION= 5 @ 1.38 log @Recursive revision bump / recommended bump for gettext ABI change. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.37 2005/12/29 06:22:24 jlam Exp $ d12 1 a12 1 MAINTAINER= tech-pkg@@NetBSD.org @ 1.37 log @Remove USE_PKGINSTALL from pkgsrc now that mk/install/pkginstall.mk automatically detects whether we want the pkginstall machinery to be used by the package Makefile. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.36 2005/12/05 23:55:23 rillig Exp $ d6 1 a6 1 PKGREVISION= 4 @ 1.36 log @Ran "pkglint --autofix", which corrected some of the quoting issues in CONFIGURE_ARGS. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.35 2005/10/23 19:50:55 heinz Exp $ a18 1 USE_PKGINSTALL= YES @ 1.35 log @Updated to version 2.1.10nb4. Pkgsrc changes: - Fix of PR pkg/29201: Applied optional GeoIP patch proposed in the PR (option geoip). - Converted the post-build target to the "subst" framework. - Removed an unnecessary CONFIGURE_ENV (setting a variable internal to autoconf). - We install now some documentation files. Description of GeoIP patch: =========================== By default, Webalizer uses DNS suffix to guess country and produce geographic stats. Some WWW hostings (mostly free ones) has reverse DNS feature disabled, so there's no DNS, and consequently no geographic stats. Well, Webalizer *has* internal Reverse DNS feature (aka "Webazolver"). But it's too slow, even running 100 threads. So, is there any other way? Sure! It's GeoIP library! GeoIP is a C library that enables the user to find the country that any IP address or hostname originates from. It uses a file based database that is accurate as of March 2002. This database simply contains IP blocks as keys, and countries as values. This database should be more complete and accurate than using reverse DNS lookups. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.34 2005/04/11 21:48:02 tv Exp $ d21 1 a21 1 CONFIGURE_ARGS+= --with-etcdir=${PKG_SYSCONFDIR} @ 1.34 log @Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.33 2004/12/28 08:02:33 minskim Exp $ d6 1 a6 1 PKGREVISION= 3 a8 1 ftp://webalizer.dexa.org/pub/webalizer/ \ d27 49 a75 2 INSTALLATION_DIRS= bin man/man1 share/examples a79 8 post-build: cd ${WRKSRC}; for file in sample.conf webalizer.1; do \ ${SED} -e "s|@@PKG_SYSCONFDIR@@|${PKG_SYSCONFDIR}|g" \ $${file} > $${file}.fixed; \ ${MV} -f ${WRKSRC}/$${file}.fixed ${WRKSRC}/$${file}; \ done @ 1.33 log @Add missing dependency on gettext-lib. While here, move buildlink3.mk files ahead of make targets. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.32 2004/10/03 00:18:27 tv Exp $ a19 1 USE_BUILDLINK3= YES @ 1.32 log @Libtool fix for PR pkg/26633, and other issues. Update libtool to 1.5.10 in the process. (More information on tech-pkg.) Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and installing .la files. Bump PKGREVISION (only) of all packages depending directly on the above via a buildlink3 include. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.31 2004/06/20 21:52:08 xtraeme Exp $ d32 4 a42 2 .include "../../graphics/freetype2/buildlink3.mk" .include "../../graphics/gd/buildlink3.mk" @ 1.31 log @Bump PKGREVISION and remove X11 support where appropiate. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.30 2004/04/09 00:39:20 minskim Exp $ d6 1 a6 1 PKGREVISION= 2 @ 1.30 log @bl3ify and enable pkgviews installation. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.29 2004/01/20 12:28:00 agc Exp $ d6 1 a6 1 PKGREVISION= 1 a21 1 USE_X11= YES @ 1.29 log @Move WRKSRC definition away from the first paragraph in a Makefile. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.28 2003/07/17 22:56:07 grant Exp $ d17 2 d20 1 a20 1 USE_BUILDLINK2= YES d31 2 d40 2 a41 2 .include "../../graphics/freetype2/buildlink2.mk" .include "../../graphics/gd/buildlink2.mk" @ 1.28 log @s/netbsd.org/NetBSD.org/ @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.27 2003/07/01 14:32:59 jwise Exp $ a6 1 WRKSRC= ${WRKDIR}/${DISTNAME:S/-src//} d17 1 @ 1.27 log @Update to use freetype2. Verified working. net/mrtg deserves the same treatment, but I won't have time to provide it. Anyone? @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.26 2003/06/23 11:20:39 adam Exp $ d14 1 a14 1 MAINTAINER= tech-pkg@@netbsd.org @ 1.26 log @Revision bumped because of gd shared library major bump; buildlink added for freetype-lib @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.25 2003/06/02 01:15:58 jschauma Exp $ d36 1 a36 1 .include "../../graphics/freetype-lib/buildlink2.mk" @ 1.25 log @Use tech-pkg@@ in favor of packages@@ as MAINTAINER for orphaned packages. Should anybody feel like they could be the maintainer for any of thewe packages, please adjust. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.24 2003/03/29 12:42:56 jmmv Exp $ d6 1 d36 1 @ 1.24 log @Place WRKSRC where it belongs, to make pkglint happy; ok'ed by wiz. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.23 2003/03/22 03:11:29 wiz Exp $ d13 1 a13 1 MAINTAINER= packages@@netbsd.org @ 1.23 log @Update to 2.1.10, from PR 20445. Changes: o Fix posible obscure buffer overflow bug in DNS resolver code o Added additional extended character fixes o Let code accept partial content response codes along with 200's o Added code to catch blank hostnames (yes, they have been found!) Will convert them into 'Unknown' @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.22 2003/01/28 22:04:33 jlam Exp $ d6 1 a15 2 WRKSRC= ${WRKDIR}/${DISTNAME:S/-src//} @ 1.22 log @Instead of including bsd.pkg.install.mk directly in a package Makefile, have it be automatically included by bsd.pkg.mk if USE_PKGINSTALL is set to "YES". This enforces the requirement that bsd.pkg.install.mk be included at the end of a package Makefile. Idea suggested by Julio M. Merino Vidal . @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.21 2002/08/25 21:52:25 jlam Exp $ d4 2 a5 3 DISTNAME= webalizer-2.01-09-src PKGNAME= webalizer-2.1.9 PKGREVISION= 1 @ 1.21 log @Merge packages from the buildlink2 branch back into the main trunk that have been converted to USE_BUILDLINK2. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.20.2.1 2002/06/30 06:24:36 jlam Exp $ d20 1 a37 2 .include "../../mk/bsd.pkg.install.mk" @ 1.20 log @Give all packages which depend on "png" a version bump, and update all dependencies on packages depending on "png" which contain shared libraries, all for the (imminent) update to the "png" package. [List courtesy of John Darrow, courtesy of "bulk-build".] @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.19 2002/02/24 14:55:59 veego Exp $ d19 2 a20 1 USE_BUILDLINK_ONLY= YES d24 1 a24 1 CONFIGURE_ENV+= ac_cv_GDLIB=${BUILDLINK_DIR}/include d36 2 a37 2 .include "../../graphics/gd/buildlink.mk" .include "../../mk/x11.buildlink.mk" @ 1.20.2.1 log @Convert to use the buildlink2 framework. Trim any unnecessary changes in the patches or remove them entirely. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.20 2002/03/13 17:37:53 fredb Exp $ d19 1 a19 2 USE_BUILDLINK2= YES USE_X11= YES d23 1 a23 1 CONFIGURE_ENV+= ac_cv_GDLIB=${BUILDLINK_PREFIX.gd}/include d35 2 a36 2 .include "../../graphics/gd/buildlink2.mk" @ 1.19 log @ftp.mrunix.net moved the webalizer directory into an pub directory. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.18 2002/02/19 13:09:37 martti Exp $ d6 1 @ 1.18 log @Updated webalizer to 2.1.9 Fixes several known bugs, as well as a cross-site scripting vulnerability (discovered by Flavio Veloso of Magnux Software), that could allow malicious HTML tags to be injected in the reports generated by the Webalizer. This release also includes several new and updated language files. All users are encouraged to upgrade as soon as possible. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.17 2001/12/02 06:56:47 jlam Exp $ d7 1 a7 1 MASTER_SITES= ftp://ftp.mrunix.net/webalizer/ \ @ 1.17 log @bsd.pkg.install.mk calls the INSTALL script at the right times automatically, so no need to do it ourselves. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.16 2001/12/01 15:08:02 jlam Exp $ d4 2 a5 2 DISTNAME= webalizer-2.01-06-src PKGNAME= webalizer-2.01.06 @ 1.16 log @Buildlink'ify, respect PKG_SYSCONFDIR, and use the general INSTALL scripts. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.15 2001/12/01 02:26:24 briggs Exp $ a32 6 pre-install: PKG_PREFIX=${PREFIX} ${SH} ${INSTALL_FILE} ${PKGNAME} PRE-INSTALL post-install: PKG_PREFIX=${PREFIX} ${SH} ${INSTALL_FILE} ${PKGNAME} POST-INSTALL @ 1.15 log @Make sure we can find libgd.* @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.14 2001/05/05 12:12:14 wiz Exp $ d12 1 a12 1 MAINTAINER= mjl@@netbsd.org d16 1 a16 2 DEPENDS+= gd-1.*:../../graphics/gd DEPENDS+= freetype-lib>=1.3.1:../../graphics/freetype-lib d18 18 a35 1 WRKSRC= ${WRKDIR}/webalizer-2.01-06 d37 2 a38 12 USE_X11= yes USE_XPM= yes GNU_CONFIGURE= yes CONFIGURE_ARGS= --with-gd=${LOCALBASE}/include --with-gdlib=${LOCALBASE}/lib \ --enable-dns post-patch: @@for f in webalizer.1; do \ ${SED} 's:@@@@prefix@@@@:'${PREFIX}':g' ${WRKSRC}/$$f \ >${WRKSRC}/$$f.new && \ ${MV} ${WRKSRC}/$$f.new ${WRKSRC}/$$f; \ done d40 3 @ 1.14 log @Add '--enable-dns' to CONFIGURE_ARGS. pkg/12753 by Dave Burgess. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.13 2001/02/17 17:22:46 wiz Exp $ d24 1 a24 1 CONFIGURE_ARGS= --with-gd=${LOCALBASE}/include \ @ 1.13 log @Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.12 2000/11/14 00:01:27 briggs Exp $ d24 2 a25 1 CONFIGURE_ARGS= --with-gd=${LOCALBASE}/include @ 1.12 log @Add USE_XPM and a dependancy on freetype-lib. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.11 2000/10/18 16:41:23 mjl Exp $ d14 1 @ 1.11 log @Updated to 2.01.06. Changes include: o Fixed possible segfault condition in MangleAgent code on some malformed user agent names. o Fixed DNS to prevent hangs on blank and malformed hostnames. o Fixed problem calculating visits. o Fixed hostname lowercase problem (wasn't) when using DNS lookups. o Fixed problem with incremental datafile which could cause a read error under certain circumstances o Fixed problem with hash table node creation o Fixed problem where country graph could be produced incorrectly o Found and fixed a problem with a possible 32-bit wrap around o Added DailyGraph and DailyStats configuration options o Improved visit calculation logic to reduce 'false' counts o Added reverse DNS lookup capability. o Added ability to dump Sites, URL's, Referrers, User Agents, Usernames and Search Strings to tab delimited files o Added username analysis, based on usernames found in the log, o Added the ability to display ALL sites, URL's, Referrers, User Agents and Search Strings on a seperate HTML page o Added support for squid proxy logs o Completely modified the way the various TOP tables are handled and sorted o Added the ability to group domains automatically o Added user configurable search engine specification o Changed code to use the latest version of GD which supports PNG o Added ability to override log file to STDIN by use of '-' o Added gzipped logfile support. o Minor changes to search string code to increase accuracy. o Minor changes to URL parse code to allow additional characters. o Major changes to hash table node format for reduced memory usage. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.10 2000/04/26 03:21:35 hubertf Exp $ d16 1 d21 1 @ 1.10 log @ * link in libjpeg (ELF issue?) * be more liberal about gd version @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.9 1999/11/29 04:06:27 explorer Exp $ d4 2 a5 2 DISTNAME= webalizer-1.30-04-src PKGNAME= webalizer-1.30.04 d10 1 a10 1 EXTRACT_SUFX= .tgz d12 1 a12 1 MAINTAINER= mjl@@emsi.priv.at d17 1 a17 1 WRKSRC= ${WRKDIR}/webalizer-1.30-04 @ 1.9 log @Connected to www.mrunix.net. 220 tex.eurobase.net FTP server (Version wu-2.6.0(1) Wed Oct 20 01:43:26 EDT 1999) ready. 331 Guest login ok, send your complete e-mail address as password. 530-Sorry, anonymous access is not allowed. If you are looking for 530-the Webalizer software, please visit ftp.mrunix.net 530 Login incorrect. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.8 1999/11/01 03:38:18 jlam Exp $ d15 1 a15 1 DEPENDS+= gd-1.7.3:../../graphics/gd @ 1.8 log @* Modify to support gd-1.7.3. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.7 1999/08/27 09:06:37 agc Exp $ d7 1 a7 1 MASTER_SITES= ftp://www.mrunix.net/webalizer/ \ @ 1.7 log @Update this package to depend on gd-1.6.3, with the resulting GIF -> PNG changes necessary. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.6 1999/08/26 20:25:43 mjl Exp $ d15 1 a15 1 DEPENDS= gd-1.6.3:../../graphics/gd d19 1 d21 1 a21 2 CONFIGURE_ARGS= --with-gdlib=${PREFIX}/lib \ --with-gd=${PREFIX}/include/gd d25 3 a27 2 ${SED} 's:@@@@prefix@@@@:'${PREFIX}':g' ${WRKSRC}/$$f >${WRKSRC}/$$f.new && \ ${MV} ${WRKSRC}/$$f.new ${WRKSRC}/$$f; \ @ 1.6 log @Updated to 1.30.04. Major changes include: o Fixed minor bug that would allow incorrect site totals for the first day of the month under certain conditions. o Added Top Entry and Exit Page tables. o Added 'Group' labels. Allows display of a specified label for grouped entries (in 'Top' tables). o Added 'Visits' totals. o Added Search String analysis. o Added native support for ftp logs (xferlog ala wu-ftpd). o Added background lines to graphs. o Added additonal 'Top' tables for SITES and URL's, sorted by KBytes instead of hits. o Added additional calculations for max/avg files, pages, visits and KBytes in monthly statistics. o Updated generated HTML code to fully comply with the HTML 4.0 Transitional spec. DOCTYPE header reflects this change as well. o Changed code to use 4 digit years in filenames. o Language files and documentation updated for new functions. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.5 1999/05/03 20:25:37 tv Exp $ d15 1 a15 1 DEPENDS= gd-1.3p1:../../graphics/gd @ 1.5 log @Change gd package "version" to 1.3p1 so that packages (particularly py-gd) will not try to link against the version without a shared library. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.4 1999/04/09 20:19:11 mjl Exp $ d4 2 a5 2 DISTNAME= webalizer-1.22-03-src PKGNAME= webalizer-1.22.03 d7 3 a9 2 MASTER_SITES= ftp://ftp.mrunix.net/pub/webalizer/ \ ftp://samhain.unix.cslab.tuwien.ac.at/pub/webalizer/ d17 5 a21 1 WRKSRC= ${WRKDIR}/webalizer-1.22-03 d24 1 a24 1 @@for f in webalizer.c webalizer.1; do \ @ 1.4 log @Updated to 1.22-03 as per PR/7341 by D'Arcy J.M. Cain (originally from Bradford L. Barrett ) In this version, a potential segfault condition that has been corrected. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.3 1999/03/30 22:41:41 mjl Exp $ d7 2 a8 3 MASTER_SITES= \ ftp://ftp.mrunix.net/pub/webalizer/ \ ftp://samhain.unix.cslab.tuwien.ac.at/pub/webalizer/ d14 1 a14 1 DEPENDS= gd-1.3:../../graphics/gd d16 1 a16 1 WRKSRC = ${WRKDIR}/webalizer-1.22-03 @ 1.3 log @Rename to webalizer-1.22.01 (no dash in version number) @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.2 1999/03/23 21:16:06 mjl Exp $ d4 2 a5 2 DISTNAME= webalizer-1.22-01-src PKGNAME= webalizer-1.22.01 d7 3 a9 1 MASTER_SITES= ftp://ftp.mrunix.net/pub/webalizer/ d17 1 a17 1 WRKSRC = ${WRKDIR}/webalizer-1.22-01 @ 1.2 log @Update webalizer to 1.22-01. @ text @d1 1 a1 1 # $NetBSD: Makefile,v 1.1.1.1 1998/11/07 13:22:53 frueauf Exp $ d5 1 a5 1 PKGNAME= webalizer-1.22-01 d15 1 a15 1 WRKSRC = ${WRKDIR}/${PKGNAME} @ 1.1 log @Initial revision @ text @d1 1 a1 1 # $NetBSD$ d4 2 a5 2 DISTNAME= webalizer-1.20-07-src PKGNAME= webalizer-1.20-07 d7 1 a7 2 MASTER_SITES= ftp://ftp.mrunix.net/pub/webalizer/ \ ftp://samhain.unix.cslab.tuwien.ac.at/pub/webalizer/ d15 1 a15 1 NO_WRKSUBDIR= yes d19 2 a20 2 ${SED} 's:@@@@prefix@@@@:'${PREFIX}':g' ${WRKDIR}/$$f >${WRKDIR}/$$f.new && \ ${MV} ${WRKDIR}/$$f.new ${WRKDIR}/$$f; \ a21 5 do-install: ${INSTALL_PROGRAM} ${WRKSRC}/webalizer ${PREFIX}/bin/ ${INSTALL_MAN} ${WRKSRC}/webalizer.1 ${PREFIX}/man/man1 ${INSTALL_DATA} ${WRKSRC}/sample.conf ${PREFIX}/etc/webalizer.conf-sample @ 1.1.1.1 log @Initial import of webalizer-1.20-07, a Web server log file analysis program. Provided in pr 6405 by Martin J. Laubach. @ text @@