head 1.3; access; symbols pkgsrc-2013Q4:1.2.0.10 pkgsrc-2013Q4-base:1.2 pkgsrc-2013Q3:1.2.0.8 pkgsrc-2013Q3-base:1.2 pkgsrc-2013Q2:1.2.0.6 pkgsrc-2013Q2-base:1.2 pkgsrc-2013Q1:1.2.0.4 pkgsrc-2013Q1-base:1.2 pkgsrc-2012Q4:1.2.0.2 pkgsrc-2012Q4-base:1.2 pkgsrc-2012Q3:1.1.1.1.0.42 pkgsrc-2012Q3-base:1.1.1.1 pkgsrc-2012Q2:1.1.1.1.0.40 pkgsrc-2012Q2-base:1.1.1.1 pkgsrc-2012Q1:1.1.1.1.0.38 pkgsrc-2012Q1-base:1.1.1.1 pkgsrc-2011Q4:1.1.1.1.0.36 pkgsrc-2011Q4-base:1.1.1.1 pkgsrc-2011Q3:1.1.1.1.0.34 pkgsrc-2011Q3-base:1.1.1.1 pkgsrc-2011Q2:1.1.1.1.0.32 pkgsrc-2011Q2-base:1.1.1.1 pkgsrc-2011Q1:1.1.1.1.0.30 pkgsrc-2011Q1-base:1.1.1.1 pkgsrc-2010Q4:1.1.1.1.0.28 pkgsrc-2010Q4-base:1.1.1.1 pkgsrc-2010Q3:1.1.1.1.0.26 pkgsrc-2010Q3-base:1.1.1.1 pkgsrc-2010Q2:1.1.1.1.0.24 pkgsrc-2010Q2-base:1.1.1.1 pkgsrc-2010Q1:1.1.1.1.0.22 pkgsrc-2010Q1-base:1.1.1.1 pkgsrc-2009Q4:1.1.1.1.0.20 pkgsrc-2009Q4-base:1.1.1.1 pkgsrc-2009Q3:1.1.1.1.0.18 pkgsrc-2009Q3-base:1.1.1.1 pkgsrc-2009Q2:1.1.1.1.0.16 pkgsrc-2009Q2-base:1.1.1.1 pkgsrc-2009Q1:1.1.1.1.0.14 pkgsrc-2009Q1-base:1.1.1.1 pkgsrc-2008Q4:1.1.1.1.0.12 pkgsrc-2008Q4-base:1.1.1.1 pkgsrc-2008Q3:1.1.1.1.0.10 pkgsrc-2008Q3-base:1.1.1.1 cube-native-xorg:1.1.1.1.0.8 cube-native-xorg-base:1.1.1.1 pkgsrc-2008Q2:1.1.1.1.0.6 pkgsrc-2008Q2-base:1.1.1.1 cwrapper:1.1.1.1.0.4 pkgsrc-2008Q1:1.1.1.1.0.2 pkgsrc-2008Q1-base:1.1.1.1 pkgsrc-base:1.1.1.1 TNF:1.1.1; locks; strict; comment @# @; 1.3 date 2014.02.26.01.16.56; author gdt; state dead; branches; next 1.2; commitid wpnDkWfltFtm2yqx; 1.2 date 2012.12.15.00.29.31; author pettai; state Exp; branches; next 1.1; 1.1 date 2008.03.04.11.30.08; author shannonjr; state Exp; branches 1.1.1.1; next ; 1.1.1.1 date 2008.03.04.11.30.08; author shannonjr; state Exp; branches; next ; desc @@ 1.3 log @Drop old patches that I don't understand. There were two patches to cast __FUNCTION__ to const char *; this is apparently to work around a warning. gcc on NetBSD 6 and clang on osx 10.9 do not emit a warning with the unpatched code. Upstream doesn't understand the patch, and I don't etiher. ok pettai@@ Take maintainership. @ text @$NetBSD: patch-ad,v 1.2 2012/12/15 00:29:31 pettai Exp $ --- src/ccid_usb.c.orig 2012-12-11 19:45:39.000000000 +0000 +++ src/ccid_usb.c @@@@ -1106,7 +1106,7 @@@@ int InterruptRead(int reader_index, int switch (ret) { case LIBUSB_TRANSFER_COMPLETED: - DEBUG_XXD("NotifySlotChange: ", buffer, actual_length); + DEBUG_XXD("NotifySlotChange: ", (const unsigned char *) buffer, actual_length); break; case LIBUSB_TRANSFER_TIMED_OUT: @ 1.2 log @A major version bump gives a long changelog... 1.4.5: - Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID), BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with fingerprint), SDS DOMINO-Key TWIN Pro - Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND - SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not the vendor name and version of the driver but of the IFD: InterFace Device i.e. the smart card reader. We then return the USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION - reduce binary size bu removing unused features from simclist - Fix some warnings reported bu Coverity 1.4.4: - Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio Generic - Activate USB automatic power suspend. The Linux kernel should power off the reader automatically if it is not used (pcscd is not running). - Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines. They just duplicate wLcdLayout - some minor bugs removed 1.4.3: - Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011, Feitian ePass2003 readers - use :libudev: instead of :libhal: naming scheme. - Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch and the associated documentation. - the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so disable it - some minor bugs removed 1.4.2: - Add support of Feitian SCR310 reader (also known as 301v2), ACS APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200, Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers - Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II - Ease detection of OpenCT by pcsc-lite - disable use of interrupt card events for multi slots readers (the algorithm is bogus and can't be used) - fix minor problems detected by the clang tool - some minor bugs removed 1.4.1: - Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free Software Initiative of Japan Gnuk token readers - Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they are no more supported since version 1.4.0 - SecurePINVerify() & SecurePINModify(): Accept big and little endian byte orders for multibytes fields. The application should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more and just use the normal byte order of the architecture. - Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT - Add --enable-embedded (default is no) to build libccid for an embedded system. This will activate the NO_LOG option to disable logging and limit RAM and disk consumption. - Remove --enable-udev option since it is not used anymore with libhal. The udev rules file is now used to change the access rights of the device and not send a hotplug signal to pcscd. See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html - some minor bugs removed 1.4.0: - add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00, C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader, Gemalto Hybrid Smartcard Reader - Add support of the SCM SDI 010 again. At least the contact interface can be used. - Use libusb-1.0 instead of libusb-0.1 - add support of TAG_IFD_STOP_POLLING_THREAD and use of the asynchronous libusb API to be able to stop a transfer. - Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have TAG_IFD_STOP_POLLING_THREAD defined - The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and BLUDRIVEII_CCID) is no more supported with libusb-1.0 - correctly get the IFSC from the ATR (ATR parsing was not always correct) - some minor bugs removed @ text @d1 1 a1 1 $NetBSD$ @ 1.1 log @Initial revision @ text @d3 1 a3 1 --- src/ccid_usb.c.orig 2008-02-08 02:16:38.000000000 -0700 d5 7 a11 6 @@@@ -880,7 +880,7 @@@@ int InterruptRead(int reader_index) usbDevice[reader_index].filename, strerror(errno)); } else - DEBUG_XXD("NotifySlotChange: ", buffer, ret); + DEBUG_XXD("NotifySlotChange: ", (const unsigned char *) buffer, ret); d13 1 a13 2 return ret; } /* InterruptRead */ @ 1.1.1.1 log @This package provides a generic USB CCID (Chip/Smart Card Interface Devices) driver and ICCD (Integrated Circuit(s) Card Devices). See the USB CCID and ICCD specifications from the USB working group. @ text @@