head 1.10; access; symbols pkgsrc-2026Q1:1.10.0.158 pkgsrc-2026Q1-base:1.10 pkgsrc-2025Q4:1.10.0.156 pkgsrc-2025Q4-base:1.10 pkgsrc-2025Q3:1.10.0.154 pkgsrc-2025Q3-base:1.10 pkgsrc-2025Q2:1.10.0.152 pkgsrc-2025Q2-base:1.10 pkgsrc-2025Q1:1.10.0.150 pkgsrc-2025Q1-base:1.10 pkgsrc-2024Q4:1.10.0.148 pkgsrc-2024Q4-base:1.10 pkgsrc-2024Q3:1.10.0.146 pkgsrc-2024Q3-base:1.10 pkgsrc-2024Q2:1.10.0.144 pkgsrc-2024Q2-base:1.10 pkgsrc-2024Q1:1.10.0.142 pkgsrc-2024Q1-base:1.10 pkgsrc-2023Q4:1.10.0.140 pkgsrc-2023Q4-base:1.10 pkgsrc-2023Q3:1.10.0.138 pkgsrc-2023Q3-base:1.10 pkgsrc-2023Q2:1.10.0.136 pkgsrc-2023Q2-base:1.10 pkgsrc-2023Q1:1.10.0.134 pkgsrc-2023Q1-base:1.10 pkgsrc-2022Q4:1.10.0.132 pkgsrc-2022Q4-base:1.10 pkgsrc-2022Q3:1.10.0.130 pkgsrc-2022Q3-base:1.10 pkgsrc-2022Q2:1.10.0.128 pkgsrc-2022Q2-base:1.10 pkgsrc-2022Q1:1.10.0.126 pkgsrc-2022Q1-base:1.10 pkgsrc-2021Q4:1.10.0.124 pkgsrc-2021Q4-base:1.10 pkgsrc-2021Q3:1.10.0.122 pkgsrc-2021Q3-base:1.10 pkgsrc-2021Q2:1.10.0.120 pkgsrc-2021Q2-base:1.10 pkgsrc-2021Q1:1.10.0.118 pkgsrc-2021Q1-base:1.10 pkgsrc-2020Q4:1.10.0.116 pkgsrc-2020Q4-base:1.10 pkgsrc-2020Q3:1.10.0.114 pkgsrc-2020Q3-base:1.10 pkgsrc-2020Q2:1.10.0.110 pkgsrc-2020Q2-base:1.10 pkgsrc-2020Q1:1.10.0.90 pkgsrc-2020Q1-base:1.10 pkgsrc-2019Q4:1.10.0.112 pkgsrc-2019Q4-base:1.10 pkgsrc-2019Q3:1.10.0.108 pkgsrc-2019Q3-base:1.10 pkgsrc-2019Q2:1.10.0.106 pkgsrc-2019Q2-base:1.10 pkgsrc-2019Q1:1.10.0.104 pkgsrc-2019Q1-base:1.10 pkgsrc-2018Q4:1.10.0.102 pkgsrc-2018Q4-base:1.10 pkgsrc-2018Q3:1.10.0.100 pkgsrc-2018Q3-base:1.10 pkgsrc-2018Q2:1.10.0.98 pkgsrc-2018Q2-base:1.10 pkgsrc-2018Q1:1.10.0.96 pkgsrc-2018Q1-base:1.10 pkgsrc-2017Q4:1.10.0.94 pkgsrc-2017Q4-base:1.10 pkgsrc-2017Q3:1.10.0.92 pkgsrc-2017Q3-base:1.10 pkgsrc-2017Q2:1.10.0.88 pkgsrc-2017Q2-base:1.10 pkgsrc-2017Q1:1.10.0.86 pkgsrc-2017Q1-base:1.10 pkgsrc-2016Q4:1.10.0.84 pkgsrc-2016Q4-base:1.10 pkgsrc-2016Q3:1.10.0.82 pkgsrc-2016Q3-base:1.10 pkgsrc-2016Q2:1.10.0.80 pkgsrc-2016Q2-base:1.10 pkgsrc-2016Q1:1.10.0.78 pkgsrc-2016Q1-base:1.10 pkgsrc-2015Q4:1.10.0.76 pkgsrc-2015Q4-base:1.10 pkgsrc-2015Q3:1.10.0.74 pkgsrc-2015Q3-base:1.10 pkgsrc-2015Q2:1.10.0.72 pkgsrc-2015Q2-base:1.10 pkgsrc-2015Q1:1.10.0.70 pkgsrc-2015Q1-base:1.10 pkgsrc-2014Q4:1.10.0.68 pkgsrc-2014Q4-base:1.10 pkgsrc-2014Q3:1.10.0.66 pkgsrc-2014Q3-base:1.10 pkgsrc-2014Q2:1.10.0.64 pkgsrc-2014Q2-base:1.10 pkgsrc-2014Q1:1.10.0.62 pkgsrc-2014Q1-base:1.10 pkgsrc-2013Q4:1.10.0.60 pkgsrc-2013Q4-base:1.10 pkgsrc-2013Q3:1.10.0.58 pkgsrc-2013Q3-base:1.10 pkgsrc-2013Q2:1.10.0.56 pkgsrc-2013Q2-base:1.10 pkgsrc-2013Q1:1.10.0.54 pkgsrc-2013Q1-base:1.10 pkgsrc-2012Q4:1.10.0.52 pkgsrc-2012Q4-base:1.10 pkgsrc-2012Q3:1.10.0.50 pkgsrc-2012Q3-base:1.10 pkgsrc-2012Q2:1.10.0.48 pkgsrc-2012Q2-base:1.10 pkgsrc-2012Q1:1.10.0.46 pkgsrc-2012Q1-base:1.10 pkgsrc-2011Q4:1.10.0.44 pkgsrc-2011Q4-base:1.10 pkgsrc-2011Q3:1.10.0.42 pkgsrc-2011Q3-base:1.10 pkgsrc-2011Q2:1.10.0.40 pkgsrc-2011Q2-base:1.10 pkgsrc-2011Q1:1.10.0.38 pkgsrc-2011Q1-base:1.10 pkgsrc-2010Q4:1.10.0.36 pkgsrc-2010Q4-base:1.10 pkgsrc-2010Q3:1.10.0.34 pkgsrc-2010Q3-base:1.10 pkgsrc-2010Q2:1.10.0.32 pkgsrc-2010Q2-base:1.10 pkgsrc-2010Q1:1.10.0.30 pkgsrc-2010Q1-base:1.10 pkgsrc-2009Q4:1.10.0.28 pkgsrc-2009Q4-base:1.10 pkgsrc-2009Q3:1.10.0.26 pkgsrc-2009Q3-base:1.10 pkgsrc-2009Q2:1.10.0.24 pkgsrc-2009Q2-base:1.10 pkgsrc-2009Q1:1.10.0.22 pkgsrc-2009Q1-base:1.10 pkgsrc-2008Q4:1.10.0.20 pkgsrc-2008Q4-base:1.10 pkgsrc-2008Q3:1.10.0.18 pkgsrc-2008Q3-base:1.10 cube-native-xorg:1.10.0.16 cube-native-xorg-base:1.10 pkgsrc-2008Q2:1.10.0.14 pkgsrc-2008Q2-base:1.10 cwrapper:1.10.0.12 pkgsrc-2008Q1:1.10.0.10 pkgsrc-2008Q1-base:1.10 pkgsrc-2007Q4:1.10.0.8 pkgsrc-2007Q4-base:1.10 pkgsrc-2007Q3:1.10.0.6 pkgsrc-2007Q3-base:1.10 pkgsrc-2007Q2:1.10.0.4 pkgsrc-2007Q2-base:1.10 pkgsrc-2007Q1:1.10.0.2 pkgsrc-2007Q1-base:1.10 pkgsrc-2006Q4:1.9.0.6 pkgsrc-2006Q4-base:1.9 pkgsrc-2006Q3:1.9.0.4 pkgsrc-2006Q3-base:1.9 pkgsrc-2006Q2:1.9.0.2 pkgsrc-2006Q2-base:1.9 pkgsrc-2006Q1:1.8.0.14 pkgsrc-2006Q1-base:1.8 pkgsrc-2005Q4:1.8.0.12 pkgsrc-2005Q4-base:1.8 pkgsrc-2005Q3:1.8.0.10 pkgsrc-2005Q3-base:1.8 pkgsrc-2005Q2:1.8.0.8 pkgsrc-2005Q2-base:1.8 pkgsrc-2005Q1:1.8.0.6 pkgsrc-2005Q1-base:1.8 pkgsrc-2004Q4:1.8.0.4 pkgsrc-2004Q4-base:1.8 pkgsrc-2004Q3:1.8.0.2 pkgsrc-2004Q3-base:1.8 pkgsrc-2004Q2:1.7.0.6 pkgsrc-2004Q2-base:1.7 pkgsrc-2004Q1:1.7.0.4 pkgsrc-2004Q1-base:1.7 pkgsrc-2003Q4:1.7.0.2 pkgsrc-2003Q4-base:1.7 netbsd-1-6-1:1.5.0.6 netbsd-1-6-1-base:1.5 netbsd-1-6:1.5.0.8 netbsd-1-6-RELEASE-base:1.5 pkgviews:1.5.0.4 pkgviews-base:1.5 buildlink2:1.5.0.2 buildlink2-base:1.5 netbsd-1-5-PATCH003:1.5 netbsd-1-5-RELEASE:1.3 netbsd-1-4-PATCH003:1.3 netbsd-1-4-PATCH002:1.3 comdex-fall-1999:1.2 netbsd-1-4-PATCH001:1.2 netbsd-1-4-RELEASE:1.2 netbsd-1-3-PATCH003:1.1; locks; strict; comment @# @; 1.10 date 2007.03.23.22.08.56; author dmcmahill; state Exp; branches; next 1.9; 1.9 date 2006.05.22.19.20.04; author wiz; state Exp; branches; next 1.8; 1.8 date 2004.07.15.04.00.47; author dmcmahill; state Exp; branches; next 1.7; 1.7 date 2003.02.24.03.35.30; author dmcmahill; state Exp; branches; next 1.6; 1.6 date 2003.02.22.04.31.12; author dmcmahill; state dead; branches; next 1.5; 1.5 date 2001.12.22.00.03.26; author dmcmahill; state Exp; branches; next 1.4; 1.4 date 2001.04.08.16.25.28; author dmcmahill; state dead; branches; next 1.3; 1.3 date 99.12.22.13.25.42; author dmcmahill; state Exp; branches; next 1.2; 1.2 date 99.03.05.11.22.34; author frueauf; state Exp; branches; next 1.1; 1.1 date 98.08.25.12.53.08; author agc; state Exp; branches; next ; desc @@ 1.10 log @Update to scilab-4.1. The old version was very out of date and there have been many many changes including many bug fixes, graphics improvements, editor improvements, new toolbox functions, etc. @ text @$NetBSD$ --- routines/pvm/pvm_proc_ctrl.c.orig 2005-10-22 18:53:11.000000000 +0000 +++ routines/pvm/pvm_proc_ctrl.c @@@@ -414,7 +414,8 @@@@ void C2F(scipvmspawn)(char *task, int * char cmd[256]; char *arg[4]; int nargs= -1; - + char *path; + arg[0] = NULL; cmd[0] = 0; @@@@ -427,7 +428,13 @@@@ void C2F(scipvmspawn)(char *task, int * strcpy(cmd, "scilex.exe"); #else /* I really need scilab here for gtk -version */ - strcpy(cmd, "scilab"); + if (path = getenv("SCI")){ + strcpy(cmd,path); + strcat(cmd,"/bin/scilab"); + } + else { + strcpy(cmd, "scilab"); + } #endif #if (defined __MSC__) || defined(__MINGW32__) if ( _stricmp(task,"null") != 0) @ 1.9 log @regen patch-ah with correct offset. @ text @d1 1 a1 1 $NetBSD: patch-ah,v 1.8 2004/07/15 04:00:47 dmcmahill Exp $ d3 1 a3 1 --- routines/pvm/pvm_proc_ctrl.c.orig 2005-01-07 20:49:25.000000000 +0000 d5 1 a5 1 @@@@ -388,7 +388,8 @@@@ void C2F(scipvmspawn)(char *task, int * d15 1 a15 1 @@@@ -401,7 +402,13 @@@@ void C2F(scipvmspawn)(char *task, int * d28 1 a28 1 #if (defined __MSC__) || (defined __ABSC__) || defined(__MINGW32__) @ 1.8 log @update to scilab-3.0 Main Changes Scilab 2.7 -> 3.0 ============================== NEW FUNCTIONALITIES =================== - continue instruction added - [a(i,j),b(..),..]=foo(..) syntax is now handled - arpack algorithms for sparse matrix eigenvalues/eigenvectors computation added - Levenberg-Marquardt algorithm of Minpack used to define function lsqrsolve - New graphics mode improved - beta and legendre function added (thanks to B Pincon) - Scicos has been extended to handle non causal systems description (supported by RNTL) - Matlab to Scilab translator has been re-written, and extended to current Matlab syntax. OTHERS IMPROVEMENTS =================== - Better discontinuities handling in Scicos - More efficient number parsing (thanks to B Pincon) - More efficient 3D Zoom (thanks to E Segre) - Improved scipad, shortcuts, language handling, colorization, bug fixes.. (thanks to E Segre) - for loop variable is no more removed at the end of the loops - figure sizes are now taken into account in Postscript export - Windows GUI improved - Graphic windows refresh improved under Windows - Scilab has been adapated to IA64 architecture - Helvetica (Arial on Windows) fonts added (corresponding font identifiers are from 6 to 9) (thanks to B Pincon) - N dimensionnal matrices efficiency improved (thanks to B Pincon) - logical expressions shortcuts handled in if - cd, ls, clc, clf, tohome functions added - functions with no argument can be called without () if called as a command @ text @d1 1 a1 1 $NetBSD$ d3 1 a3 1 --- routines/pvm/pvm_proc_ctrl.c.orig Sat Feb 28 13:50:09 2004 d5 1 a5 1 @@@@ -381,7 +381,8 @@@@ void C2F(scipvmspawn)(char *task, int * d15 1 a15 1 @@@@ -394,7 +395,13 @@@@ void C2F(scipvmspawn)(char *task, int * @ 1.7 log @- fix the tk shared library path to allow the scipad editor to work - make sure the path is correctly determined for pvm. - add a --tag= argument to libtool when building fortran code. This makes all selftests pass on my alpha. @ text @d3 1 a3 1 --- routines/pvm/pvm_proc_ctrl.c.orig Thu Sep 12 08:24:47 2002 d5 11 a15 1 @@@@ -373,7 +373,13 @@@@ void C2F(scipvmspawn)(char *task, int * @ 1.6 log @update to scilab-2.7. Main Changes Scilab 2.6 -> 2.7 ============================== THANKS ====== Scilab group wants to thank the increasing number of people who have contributed to this new version of Scilab, with special mention to Anders Blomdell, Stephane Mottelet, Dan McMahill Ton van Overbeek, Bruno Pincon and Enrico Segre. NEW FUNCTIONALITIES =================== Slicot based control routines (www.win.tue.nl/wgs/slicot.html) have been introduced with a special attention to identification functions, lyapunov, sylvester and riccati equation solvers. Interface with TeXmacs (www.texmacs.org) a high level scientific text editor. The editor allows you to write structured documents via a wysiwyg interface including Scilab sessions and results. An embedded text editor scipad derived from TkNotepad (www.mindspring.com/~joeja/programs.html) as been developped. C Code generation from Scicos discrete models Blocks defining DAE are now usable in Scicos. Statistic toolbox added (labostat). A new graphics version based on objects and entities has been developped (beta version). It allows to edit the properties of graphics objects. By default, the old graphics version is used. Tu use the new graphics version see the help of "graphics_entities". OTHERS IMPROVEMENTS =================== Linear algebra primitives now based on Lapack instead of Linpack/Eispack. Basic functions revised (thanks to B Pincon). stacksize use is no more restricted. Hypertext, xml based, online help. Binary Matlab file .mat loader (loadmatfile) added. Possibility to customize graphics window event handlers (seteventhandler). edit_graph, a graph editor for Metanet toolbox, written in Scilab, replaces xmetanet. It works on both Unix and Windows. INCOMPATIBLITIES ================ It is higly recommended to rebuild user's scilab functions libraries. This can be done as follow: predef(0);genlib('mylib','mylib_path',%t) gschur and gspec functions are now obsolete and replaced by schur and spec. Geci and the communication library have been removed. Use PVM interface instead. Metanet graph editor has been rewritten. Use edit_graph instead. man pages have to be written in HTML or better in XML but chapters written in the old ascii files are still handled. Scicos internal data structure have been changed. Automatic translation is made when old diagrams are loaded. @ text @d1 1 a1 1 $NetBSD: patch-ah,v 1.5 2001/12/22 00:03:26 dmcmahill Exp $ d3 17 a19 14 fix the ascii() function. patch from Serge Steer on comp.soft-sys.math.scilab --- routines/interf/strelm.f.orig Wed Feb 28 05:17:35 2001 +++ routines/interf/strelm.f Wed Dec 12 16:17:42 2001 @@@@ -1478,6 +1478,6 @@@@ lr=ilr+6 do 20 i=0,n-1 - m=int(stk(l+i)) - istk(lr+i)=getcode(m) + c=char(int(stk(l+i))) + istk(lr+i)=getcode(c) 20 continue lstk(top+1)=sadr(lr+n) @ 1.5 log @- fix a bug in the ascii() function noticed on sparc. Patch from Serge Steer on comp.soft-sys.scilab - minor man page fixes - make the 'whatis' files used for the online help be lined up in columns which significantly enhances readability - minor fixes to the Makefile fragment for building scilab shared objects. bump rev to scilab-2.6nb2 @ text @d1 1 a1 1 $NetBSD$ @ 1.4 log @Update to scilab-2.6 Thanks to the scilab folks at INRIA for helping us get rid of 9 more patches! From the CHANGES file: Main Changes Scilab 2.5 -> 2.6 ============================== NEW FUNCTIONALITIES =================== Automatic graphic rescaling when combining 2D plots, axis handling Isometric 3D plots. Thanks to Enrico Segre 3D plots shading. Thanks to Stephane MOTTELET Error messages handling Grep function added Modeless message box added Profiling of functions execution added Real time simulation in Scicos. Thanks to Anders Blomdell Scicos diagram linearization and fixed point computation OTHERS IMPROVEMENTS =================== A more professional licence Input/Output improved (carriage return at the end of the file are not required anymore, OS independent ascii file input, handling of opened files ) More complete mexlib for MatlabV mex interface. Many bug corrected in integer types manipulation API improved, many examples given A better window management under KDE A better plugin interface (help, demos,...) and new Scilab functions for building and loading interfaces. Interactive demos for ODE and DAE solving added Scicos' GUI improved, customizable keyboard shortcuts added Default list, tlist and mlist display can be overloaded It is now possible to draw dashed lines in color. Background now work with postscript driver. Easiest argument passing to plot2d, plot3d,... GIF driver bugs fixed. INCOMPATIBLITY ============== help and scicos palettes handling have changed. Fraclab toolbox has been moved to the contributions part and is no more included in the package The Communication Toolbox (geci) is now obsolete. It will be removed in next release. Use PVM instead. @ text @d1 1 a1 1 $NetBSD: patch-ah,v 1.3 1999/12/22 13:25:42 dmcmahill Exp $ d3 14 a16 1859 --- ./configure.orig Tue Dec 14 06:57:13 1999 +++ ./configure Tue Dec 21 17:29:58 1999 @@@@ -167,14 +167,4 @@@@ --with-tk-include=TK_INC_DIR Tk include is in TK_INC_DIR [TK_INC_DIR=TCL_INC_DIR]." -ac_help="$ac_help - --enable-shared[=PKGS] build shared libraries [default=yes]" -ac_help="$ac_help - --enable-static[=PKGS] build static libraries [default=yes]" -ac_help="$ac_help - --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" -ac_help="$ac_help - --with-gnu-ld assume the C compiler uses GNU ld [default=no]" -ac_help="$ac_help - --disable-libtool-lock avoid locking (might break parallel builds)" # Initialize some variables set by options. @@@@ -716,5 +706,5 @@@@ echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:719: checking host system type" >&5 +echo "configure:709: checking host system type" >&5 host_alias=$host @@@@ -782,5 +772,5 @@@@ set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:785: checking for $ac_word" >&5 +echo "configure:775: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -815,5 +805,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:818: checking for $ac_word" >&5 +echo "configure:808: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -850,5 +840,5 @@@@ set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:853: checking for $ac_word" >&5 +echo "configure:843: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -885,5 +875,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:888: checking for $ac_word" >&5 +echo "configure:878: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -979,5 +969,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:982: checking for $ac_word" >&5 +echo "configure:972: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1046,5 +1036,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1049: checking for $ac_word" >&5 +echo "configure:1039: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1113,5 +1103,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1116: checking for $ac_word" >&5 +echo "configure:1106: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1174,5 +1164,5 @@@@ LIEEELIB= echo $ac_n "checking for main in -lieee""... $ac_c" 1>&6 -echo "configure:1177: checking for main in -lieee" >&5 +echo "configure:1167: checking for main in -lieee" >&5 ac_lib_var=`echo ieee'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -1182,5 +1172,5 @@@@ LIBS="-lieee $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -1221,5 +1211,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1224: checking for $ac_word" >&5 +echo "configure:1214: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1258,5 +1248,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1261: checking for $ac_word" >&5 +echo "configure:1251: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1292,5 +1282,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1295: checking for $ac_word" >&5 +echo "configure:1285: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1347,5 +1337,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1350: checking for $ac_word" >&5 +echo "configure:1340: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1417,5 +1407,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1420: checking for $ac_word" >&5 +echo "configure:1410: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1479,5 +1469,5 @@@@ LIEEELIB= echo $ac_n "checking for main in -lieee""... $ac_c" 1>&6 -echo "configure:1482: checking for main in -lieee" >&5 +echo "configure:1472: checking for main in -lieee" >&5 ac_lib_var=`echo ieee'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -1487,5 +1477,5 @@@@ LIBS="-lieee $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -1526,5 +1516,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1529: checking for $ac_word" >&5 +echo "configure:1519: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1563,5 +1553,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1566: checking for $ac_word" >&5 +echo "configure:1556: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1597,5 +1587,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1600: checking for $ac_word" >&5 +echo "configure:1590: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1648,5 +1638,5 @@@@ LIEEELIB= echo $ac_n "checking for main in -lieee""... $ac_c" 1>&6 -echo "configure:1651: checking for main in -lieee" >&5 +echo "configure:1641: checking for main in -lieee" >&5 ac_lib_var=`echo ieee'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -1656,5 +1646,5 @@@@ LIBS="-lieee $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -1695,5 +1685,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1698: checking for $ac_word" >&5 +echo "configure:1688: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1732,5 +1722,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1735: checking for $ac_word" >&5 +echo "configure:1725: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1766,5 +1756,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1769: checking for $ac_word" >&5 +echo "configure:1759: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1827,5 +1817,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1830: checking for $ac_word" >&5 +echo "configure:1820: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1864,5 +1854,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1867: checking for $ac_word" >&5 +echo "configure:1857: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1898,5 +1888,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1901: checking for $ac_word" >&5 +echo "configure:1891: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -1947,5 +1937,5 @@@@ LIEEELIB= echo $ac_n "checking for main in -lieee""... $ac_c" 1>&6 -echo "configure:1950: checking for main in -lieee" >&5 +echo "configure:1940: checking for main in -lieee" >&5 ac_lib_var=`echo ieee'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -1955,5 +1945,5 @@@@ LIBS="-lieee $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -1995,5 +1985,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1998: checking for $ac_word" >&5 +echo "configure:1988: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2032,5 +2022,5 @@@@ set dummy g77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2035: checking for $ac_word" >&5 +echo "configure:2025: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_G77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2066,5 +2056,5 @@@@ set dummy f2c; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2069: checking for $ac_word" >&5 +echo "configure:2059: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F2C'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2122,5 +2112,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2125: checking for $ac_word" >&5 +echo "configure:2115: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2189,5 +2179,5 @@@@ set dummy f77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2192: checking for $ac_word" >&5 +echo "configure:2182: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2257,5 +2247,5 @@@@ set dummy fort77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2260: checking for $ac_word" >&5 +echo "configure:2250: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2324,5 +2314,5 @@@@ set dummy fort77; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2327: checking for $ac_word" >&5 +echo "configure:2317: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2453,7 +2443,7 @@@@ LDFLAGS='-Wl,--export-dynamic' echo $ac_n "checking if the linker accepts --export-dynamic""... $ac_c" 1>&6 -echo "configure:2456: checking if the linker accepts --export-dynamic" >&5 +echo "configure:2446: checking if the linker accepts --export-dynamic" >&5 cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "$ac_t""yes" 1>&6 @@@@ -2484,5 +2474,5 @@@@ set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2487: checking for $ac_word" >&5 +echo "configure:2477: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2518,10 +2508,10 @@@@ fi else - for ac_prog in f77 f2c-f77 + for ac_prog in "${FC}" f77 f2c-f77 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2526: checking for $ac_word" >&5 +echo "configure:2516: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_F77'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2558,5 +2548,5 @@@@ fi - FC=$F77 + FC="$F77" FC_OPTIONS='-O2' FC_LDFLAGS="-Wl,-R${X11BASE}/lib" @@@@ -2567,7 +2557,7 @@@@ LDFLAGS='-Wl,--export-dynamic' echo $ac_n "checking if the linker accepts --export-dynamic""... $ac_c" 1>&6 -echo "configure:2570: checking if the linker accepts --export-dynamic" >&5 +echo "configure:2560: checking if the linker accepts --export-dynamic" >&5 cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "$ac_t""yes" 1>&6 @@@@ -2599,7 +2589,7 @@@@ LDFLAGS='-Wl,--export-dynamic' echo $ac_n "checking if the linker accepts --export-dynamic""... $ac_c" 1>&6 -echo "configure:2602: checking if the linker accepts --export-dynamic" >&5 +echo "configure:2592: checking if the linker accepts --export-dynamic" >&5 cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "$ac_t""yes" 1>&6 @@@@ -2649,5 +2639,5 @@@@ set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2652: checking for $ac_word" >&5 +echo "configure:2642: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -2682,5 +2672,5 @@@@ if test "$PERIFILE" = periX11.o; then echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2685: checking how to run the C preprocessor" >&5 +echo "configure:2675: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then @@@@ -2697,5 +2687,5 @@@@ # not just through cpp. cat > conftest.$ac_ext < @@@@ -2703,5 +2693,5 @@@@ EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2706: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then @@@@ -2714,5 +2704,5 @@@@ CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < @@@@ -2720,5 +2710,5 @@@@ EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then @@@@ -2731,5 +2721,5 @@@@ CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < @@@@ -2737,5 +2727,5 @@@@ EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then @@@@ -2766,5 +2756,5 @@@@ # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:2769: checking for X" >&5 +echo "configure:2759: checking for X" >&5 # Check whether --with-x or --without-x was given. @@@@ -2828,10 +2818,10 @@@@ # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2826: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then @@@@ -2902,5 +2892,5 @@@@ LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" @@@@ -3015,8 +3005,8 @@@@ "SunOS 5"*) echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 -echo "configure:3018: checking whether -R must be followed by a space" >&5 +echo "configure:3008: checking whether -R must be followed by a space" >&5 ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_R_nospace=yes @@@@ -3041,5 +3031,5 @@@@ LIBS="$ac_xsave_LIBS -R $x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_R_space=yes @@@@ -3080,5 +3070,5 @@@@ # the Alpha needs dnet_stub (dnet does not exist). echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 -echo "configure:3083: checking for dnet_ntoa in -ldnet" >&5 +echo "configure:3073: checking for dnet_ntoa in -ldnet" >&5 ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3088,5 +3078,5 @@@@ LIBS="-ldnet $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3121,5 +3111,5 @@@@ if test $ac_cv_lib_dnet_dnet_ntoa = no; then echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 -echo "configure:3124: checking for dnet_ntoa in -ldnet_stub" >&5 +echo "configure:3114: checking for dnet_ntoa in -ldnet_stub" >&5 ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3129,5 +3119,5 @@@@ LIBS="-ldnet_stub $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3169,10 +3159,10 @@@@ # on Irix 5.2, according to dickey@@clark.net. echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 -echo "configure:3172: checking for gethostbyname" >&5 +echo "configure:3162: checking for gethostbyname" >&5 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_gethostbyname=yes" @@@@ -3218,5 +3208,5 @@@@ if test $ac_cv_func_gethostbyname = no; then echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3221: checking for gethostbyname in -lnsl" >&5 +echo "configure:3211: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3226,5 +3216,5 @@@@ LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3267,10 +3257,10 @@@@ # We assume that if connect needs -lnsl, so does gethostbyname. echo $ac_n "checking for connect""... $ac_c" 1>&6 -echo "configure:3270: checking for connect" >&5 +echo "configure:3260: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_connect=yes" @@@@ -3316,5 +3306,5 @@@@ if test $ac_cv_func_connect = no; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 -echo "configure:3319: checking for connect in -lsocket" >&5 +echo "configure:3309: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3324,5 +3314,5 @@@@ LIBS="-lsocket $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3359,10 +3349,10 @@@@ # gomez@@mi.uni-erlangen.de says -lposix is necessary on A/UX. echo $ac_n "checking for remove""... $ac_c" 1>&6 -echo "configure:3362: checking for remove" >&5 +echo "configure:3352: checking for remove" >&5 if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_remove=yes" @@@@ -3408,5 +3398,5 @@@@ if test $ac_cv_func_remove = no; then echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 -echo "configure:3411: checking for remove in -lposix" >&5 +echo "configure:3401: checking for remove in -lposix" >&5 ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3416,5 +3406,5 @@@@ LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3451,10 +3441,10 @@@@ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. echo $ac_n "checking for shmat""... $ac_c" 1>&6 -echo "configure:3454: checking for shmat" >&5 +echo "configure:3444: checking for shmat" >&5 if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shmat=yes" @@@@ -3500,5 +3490,5 @@@@ if test $ac_cv_func_shmat = no; then echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 -echo "configure:3503: checking for shmat in -lipc" >&5 +echo "configure:3493: checking for shmat in -lipc" >&5 ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3508,5 +3498,5 @@@@ LIBS="-lipc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3552,5 +3542,5 @@@@ # --interran@@uluru.Stanford.EDU, kb@@cs.umb.edu. echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 -echo "configure:3555: checking for IceConnectionNumber in -lICE" >&5 +echo "configure:3545: checking for IceConnectionNumber in -lICE" >&5 ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3560,5 +3550,5 @@@@ LIBS="-lICE $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3612,5 +3602,5 @@@@ if test "$PERIFILE" = periX11.o; then echo $ac_n "checking "for X11 release"""... $ac_c" 1>&6 -echo "configure:3615: checking "for X11 release"" >&5 +echo "configure:3605: checking "for X11 release"" >&5 if eval "test \"`echo '$''{'ac_cv_X11_release'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@@@ -3661,5 +3651,5 @@@@ fi echo $ac_n "checking for main in -lXmu""... $ac_c" 1>&6 -echo "configure:3664: checking for main in -lXmu" >&5 +echo "configure:3654: checking for main in -lXmu" >&5 ac_lib_var=`echo Xmu'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3669,5 +3659,5 @@@@ LIBS="-lXmu -lXt -lXext $X_PRE_LIBS -lX11 $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3698,5 +3688,5 @@@@ echo $ac_n "checking for main in -lXaw3d""... $ac_c" 1>&6 -echo "configure:3701: checking for main in -lXaw3d" >&5 +echo "configure:3691: checking for main in -lXaw3d" >&5 ac_lib_var=`echo Xaw3d'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3706,5 +3696,5 @@@@ LIBS="-lXaw3d -lXmu -lXt -lXext $X_PRE_LIBS -lX11 $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3735,5 +3725,5 @@@@ echo $ac_n "checking for main in -lXaw""... $ac_c" 1>&6 -echo "configure:3738: checking for main in -lXaw" >&5 +echo "configure:3728: checking for main in -lXaw" >&5 ac_lib_var=`echo Xaw'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3743,5 +3733,5 @@@@ LIBS="-lXaw -lXmu -lXt -lXext $X_PRE_LIBS -lX11 $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3803,5 +3793,5 @@@@ echo $ac_n "checking "for leading and/or trailing underscores"""... $ac_c" 1>&6 -echo "configure:3806: checking "for leading and/or trailing underscores"" >&5 +echo "configure:3796: checking "for leading and/or trailing underscores"" >&5 cat << EOF > pipof.f subroutine pipof @@@@ -3855,7 +3845,7 @@@@ echo $ac_n "checking "for use of sharpsign in CPP"""... $ac_c" 1>&6 -echo "configure:3858: checking "for use of sharpsign in CPP"" >&5 +echo "configure:3848: checking "for use of sharpsign in CPP"" >&5 cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3857: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6 @@@@ -3883,5 +3873,5 @@@@ ############################################################## echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:3886: checking for main in -lm" >&5 +echo "configure:3876: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -3891,5 +3881,5 @@@@ LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -3928,10 +3918,10 @@@@ do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3931: checking for $ac_func" >&5 +echo "configure:3921: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" @@@@ -3983,10 +3973,10 @@@@ do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3986: checking for $ac_func" >&5 +echo "configure:3976: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" @@@@ -4038,10 +4028,10 @@@@ do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4041: checking for $ac_func" >&5 +echo "configure:4031: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" @@@@ -4093,10 +4083,10 @@@@ do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4096: checking for $ac_func" >&5 +echo "configure:4086: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" @@@@ -4148,10 +4138,10 @@@@ do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4151: checking for $ac_func" >&5 +echo "configure:4141: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" @@@@ -4208,15 +4198,15 @@@@ ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4211: checking for $ac_hdr" >&5 +echo "configure:4201: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4221: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then @@@@ -4250,5 +4240,5 @@@@ TERMCAPLIB=no echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6 -echo "configure:4253: checking for main in -ltermcap" >&5 +echo "configure:4243: checking for main in -ltermcap" >&5 ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4258,5 +4248,5 @@@@ LIBS="-ltermcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4287,5 +4277,5 @@@@ if test "$TERMCAPLIB" = no; then echo $ac_n "checking for main in -ltermlib""... $ac_c" 1>&6 -echo "configure:4290: checking for main in -ltermlib" >&5 +echo "configure:4280: checking for main in -ltermlib" >&5 ac_lib_var=`echo termlib'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4295,5 +4285,5 @@@@ LIBS="-ltermlib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4325,5 +4315,5 @@@@ if test "$TERMCAPLIB" = no; then echo $ac_n "checking for main in -lcurses""... $ac_c" 1>&6 -echo "configure:4328: checking for main in -lcurses" >&5 +echo "configure:4318: checking for main in -lcurses" >&5 ac_lib_var=`echo curses'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4333,5 +4323,5 @@@@ LIBS="-lcurses $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4381,14 +4371,23 @@@@ PVMSCILIB= PVMTARGET=pvm-bidon +PVMROOT= if test "$with_pvm" != no; then +#check for a locally installed PVM +if test -x $PVM_ROOT/lib/pvmgetarch ; then + PVMROOT=$PVM_ROOT + PVMTARGET=pvm-bidon +else + PVMROOT="$SCIDIR/pvm3" + PVMTARGET=scilex-lib +fi echo $ac_n "checking "for PVM architecture"""... $ac_c" 1>&6 -echo "configure:4388: checking "for PVM architecture"" >&5 +echo "configure:4387: checking "for PVM architecture"" >&5 if eval "test \"`echo '$''{'ac_cv_PVM_arch'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else -ac_cv_PVM_arch=`./pvm3/lib/pvmgetarch` +ac_cv_PVM_arch=`$PVMROOT/lib/pvmgetarch` fi @@@@ -4397,4 +4396,5 @@@@ if test "$ac_cv_PVM_arch" = UNKNOWN; then echo "configure: warning: "PVM unable to find architecture: I will not use PVM"" 1>&2 + PVMTARGET=pvm-bidon else cat >> confdefs.h <<\EOF @@@@ -4403,9 +4403,8 @@@@ PVMARCH="$ac_cv_PVM_arch" - PVMGLIB="\$(SCIDIR)/pvm3/lib/$ac_cv_PVM_arch/libgpvm3.a" - PVMLIB="\$(SCIDIR)/pvm3/lib/$ac_cv_PVM_arch/libpvm3.a" + PVMGLIB="$PVMROOT/lib/$ac_cv_PVM_arch/libgpvm3.a" + PVMLIB="$PVMROOT/lib/$ac_cv_PVM_arch/libpvm3.a" PVMSCIDIR=pvm PVMSCILIB="\$(SCIDIR)/libs/pvm.a" - PVMTARGET=scilex-lib fi @@@@ -4484,5 +4483,5 @@@@ echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6 -echo "configure:4487: checking for main in -ldl" >&5 +echo "configure:4486: checking for main in -ldl" >&5 ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4492,5 +4491,5 @@@@ LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4540,5 +4539,5 @@@@ echo $ac_n " Testing version (need $CHK_TCL_MAJOR.$CHK_TCL_MINOR or later)... " $ac_c cat > conftest.$ac_ext <&6 -echo "configure:4634: checking for Tcl_DoOneEvent in -lm" >&5 +echo "configure:4633: checking for Tcl_DoOneEvent in -lm" >&5 ac_lib_var=`echo m'_'Tcl_DoOneEvent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4639,5 +4638,5 @@@@ LIBS="-lm -l$NAME_LIB_TCL $X_LIBS $X_EXTRA_LIBS $TCLTK_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4672,5 +4671,5 @@@@ else echo $ac_n "checking for Tcl_DoOneEvent in -lm""... $ac_c" 1>&6 -echo "configure:4675: checking for Tcl_DoOneEvent in -lm" >&5 +echo "configure:4674: checking for Tcl_DoOneEvent in -lm" >&5 ac_lib_var=`echo m'_'Tcl_DoOneEvent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4680,5 +4679,5 @@@@ LIBS="-lm -L$USER_TCL_LIB_PATH -l$NAME_LIB_TCL $X_LIBS $X_EXTRA_LIBS $TCLTK_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4759,5 +4758,5 @@@@ echo $ac_n " Testing version (need $CHK_TK_MAJOR.$CHK_TK_MINOR or later)... " $ac_c cat > conftest.$ac_ext <&6 -echo "configure:4848: checking for Tk_BindEvent in -lm" >&5 +echo "configure:4847: checking for Tk_BindEvent in -lm" >&5 ac_lib_var=`echo m'_'Tk_BindEvent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4853,5 +4852,5 @@@@ LIBS="-lm -l$NAME_LIB_TK -lX11 $X_LIBS $X_EXTRA_LIBS $TCLTK_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4866: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4886,5 +4885,5 @@@@ else echo $ac_n "checking for Tk_BindEvent in -lm""... $ac_c" 1>&6 -echo "configure:4889: checking for Tk_BindEvent in -lm" >&5 +echo "configure:4888: checking for Tk_BindEvent in -lm" >&5 ac_lib_var=`echo m'_'Tk_BindEvent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then @@@@ -4894,5 +4893,5 @@@@ LIBS="-lm -L$USER_TK_LIB_PATH -l$NAME_LIB_TK -lX11 $X_LIBS $X_EXTRA_LIBS $TCLTK_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" @@@@ -4981,620 +4980,5 @@@@ echo "configuration of libtool" -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi - -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi - -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi - -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:5054: checking build system type" >&5 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5074: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5104: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@@" - shift - ac_cv_prog_CC="$@@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5155: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:5187: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 5198 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:5203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:5229: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:5234: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:5262: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:5305: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:5329: checking for GNU ld" >&5 -else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:5332: checking for non-GNU ld" >&5 -fi -if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$ac_cv_path_LD" -if test -n "$LD"; then - echo "$ac_t""$LD" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi -test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } - -echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:5368: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 - - -echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:5384: checking for BSD-compatible nm" >&5 -if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi -fi - -NM="$ac_cv_path_NM" -echo "$ac_t""$NM" 1>&6 - - -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:5421: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" -else - ac_cv_prog_LN_S=ln -fi -fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" - - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - : -fi - -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$host" in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 5465 "configure"' > conftest.$ac_ext - if { (eval echo configure:5466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:5487: checking whether the C compiler needs -belf" >&5 -if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - lt_cv_cc_needs_belf=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - lt_cv_cc_needs_belf=no -fi -rm -f conftest* -fi - -echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - - -# Save cache, so that ltconfig can load it -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } - -# Reload cache, that may have been modified by ltconfig -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log - +#AM_PROG_LIBTOOL echo "end of configuration of libtool" @@@@ -5653,4 +5037,5 @@@@ + # for Makemex @@@@ -5822,17 +5207,8 @@@@ s%@@X_LIBS@@%$X_LIBS%g s%@@X_EXTRA_LIBS@@%$X_EXTRA_LIBS%g -s%@@build@@%$build%g -s%@@build_alias@@%$build_alias%g -s%@@build_cpu@@%$build_cpu%g -s%@@build_vendor@@%$build_vendor%g -s%@@build_os@@%$build_os%g -s%@@CC@@%$CC%g -s%@@LD@@%$LD%g -s%@@NM@@%$NM%g -s%@@LN_S@@%$LN_S%g -s%@@LIBTOOL@@%$LIBTOOL%g s%@@RM@@%$RM%g s%@@AR@@%$AR%g s%@@FILES_TO_CLEAN@@%$FILES_TO_CLEAN%g +s%@@CC@@%$CC%g s%@@CC_OPTIONS@@%$CC_OPTIONS%g s%@@CC_LDFLAGS@@%$CC_LDFLAGS%g @@@@ -5842,4 +5218,5 @@@@ s%@@FC_LDFLAGS@@%$FC_LDFLAGS%g s%@@FC_PICFLAGS@@%$FC_PICFLAGS%g +s%@@LD@@%$LD%g s%@@LD_LDFLAGS@@%$LD_LDFLAGS%g s%@@SCILAB_GS@@%$SCILAB_GS%g @@@@ -5873,4 +5250,5 @@@@ s%@@PVMGLIB@@%$PVMGLIB%g s%@@PVMTARGET@@%$PVMTARGET%g +s%@@PVMROOT@@%$PVMROOT%g s%@@TK_INC_PATH@@%$TK_INC_PATH%g s%@@TCL_INC_PATH@@%$TCL_INC_PATH%g @@@@ -5880,5 +5258,8 @@@@ s%@@DLLTOOL@@%$DLLTOOL%g s%@@LIBM@@%$LIBM%g +s%@@LIBTOOL@@%$LIBTOOL%g s%@@LIBTOOL_DEPS@@%$LIBTOOL_DEPS%g +s%@@LN_S@@%$LN_S%g +s%@@NM@@%$NM%g s%@@OBJDUMP@@%$OBJDUMP%g s%@@PACKAGE@@%$PACKAGE%g @ 1.3 log @Update the package from scilab-2.4.1 to scilab-2.5. Many thanks to the authors at Inria who, through their willingness to accept feedback, have helped me remove 39 patches! Changes to scilab include (from scilab-2.5/CHANGES): NEW FUNCTIONALITIES =================== Global variables have been introduced New graphic mode has been added to allow scrollbar handling (panner for X Window and scrollbars for Windows). GIF export format is now available for Scilab graphic windows. Keyboard events and window closing within graphical windows can now be captured. Scicos graphical user interface has been made more intuitive and keyboard shortcuts have been added. Scilab Binary files created by "save" are now system-independent so they can be exchanged. In particular (compiled macros) *.bin files and *.cos (scicos diagrams) can be exchanged. It is now possible to dynamically link C++ procedures with Scilab. A new data type "mlist" has been added. A new function "genlib" allows users to compile the .sci files in a given directory, generate associated library and load it. This function is particularly useful under windows if VC++ is not available. C formatted input output functions (printf, scanf, ..) have been interfaced to scilab. OTHERS IMPROVEMENTS =================== Efficiency has been improved using reference argument passing when possible instead of value passing. Hypermatrix opreations have been accelerated. On X Window systems 3D Athena Widgets are preferably used instead of standard Athena Widgets for a better look. The "Matlab 4" to Scilab translator has been completed and considerably improved. NEW TOOLBOXES ============= True integer data types (1,2 and 4 bytes) with associated operations and some functions acting on them have been added. A library of procedures has been added to allow the use of Matlab mex-files under Scilab. PORTS ===== Scilab has been successfully compiled with Windows ABSOFT development environment. INCOMPATIBILITIES ================= New Scilab "save"d files cannot be loaded by earlier Scilab versions. A new function "oldsave" has been added to save in old format. Scilab help mechanism has changed. The $MANCHAPTERS/Chapter is no more used, instead a Scilab variable "helps" is used. @ text @d1 1 a1 1 $NetBSD$ @ 1.2 log @Update scilab to 2.4.1. This is based on the work provided in pr 6889 by Dan McMahill. It fixes several serious problems for NetBSD/alpha and some for NetBSD/sparc. Thanx for doing the work, Dan! @ text @d3 1859 a1861 8 --- ./routines/default/mainsci.f.orig Mon Jul 20 07:37:23 1998 +++ ./routines/default/mainsci.f Mon Jul 20 07:37:23 1998 @@@@ -15,4 +15,5 @@@@ nargs = iargc() call fgetarg(0,pname) + call nofpex() i = 0 10 continue @ 1.1 log @Addition of scilab-2.4 to the packages collection. This is from Dan McMahill (mcmahill@@mtl.mit.edu) in PR pkg/6034. scilab is a high level scientific math programming environment with graphics. [scilab is HUGE.] The only major thing I changed was the way of creating the PLIST. @ text @@