head 1.20; access; symbols pkgsrc-2023Q4:1.20.0.6 pkgsrc-2023Q4-base:1.20 pkgsrc-2023Q3:1.20.0.4 pkgsrc-2023Q3-base:1.20 pkgsrc-2023Q2:1.20.0.2 pkgsrc-2023Q2-base:1.20 pkgsrc-2023Q1:1.19.0.24 pkgsrc-2023Q1-base:1.19 pkgsrc-2022Q4:1.19.0.22 pkgsrc-2022Q4-base:1.19 pkgsrc-2022Q3:1.19.0.20 pkgsrc-2022Q3-base:1.19 pkgsrc-2022Q2:1.19.0.18 pkgsrc-2022Q2-base:1.19 pkgsrc-2022Q1:1.19.0.16 pkgsrc-2022Q1-base:1.19 pkgsrc-2021Q4:1.19.0.14 pkgsrc-2021Q4-base:1.19 pkgsrc-2021Q3:1.19.0.12 pkgsrc-2021Q3-base:1.19 pkgsrc-2021Q2:1.19.0.10 pkgsrc-2021Q2-base:1.19 pkgsrc-2021Q1:1.19.0.8 pkgsrc-2021Q1-base:1.19 pkgsrc-2020Q4:1.19.0.6 pkgsrc-2020Q4-base:1.19 pkgsrc-2020Q3:1.19.0.4 pkgsrc-2020Q3-base:1.19 pkgsrc-2020Q2:1.19.0.2 pkgsrc-2020Q2-base:1.19 pkgsrc-2020Q1:1.18.0.8 pkgsrc-2020Q1-base:1.18 pkgsrc-2019Q4:1.18.0.10 pkgsrc-2019Q4-base:1.18 pkgsrc-2019Q3:1.18.0.6 pkgsrc-2019Q3-base:1.18 pkgsrc-2019Q2:1.18.0.4 pkgsrc-2019Q2-base:1.18 pkgsrc-2019Q1:1.18.0.2 pkgsrc-2019Q1-base:1.18 pkgsrc-2018Q4:1.16.0.8 pkgsrc-2018Q4-base:1.16 pkgsrc-2018Q3:1.16.0.6 pkgsrc-2018Q3-base:1.16 pkgsrc-2018Q2:1.16.0.4 pkgsrc-2018Q2-base:1.16 pkgsrc-2018Q1:1.16.0.2 pkgsrc-2018Q1-base:1.16 pkgsrc-2017Q4:1.15.0.10 pkgsrc-2017Q4-base:1.15 pkgsrc-2017Q3:1.15.0.8 pkgsrc-2017Q3-base:1.15 pkgsrc-2017Q2:1.15.0.4 pkgsrc-2017Q2-base:1.15 pkgsrc-2017Q1:1.15.0.2 pkgsrc-2017Q1-base:1.15 pkgsrc-2016Q4:1.14.0.4 pkgsrc-2016Q4-base:1.14 pkgsrc-2016Q3:1.14.0.2 pkgsrc-2016Q3-base:1.14 pkgsrc-2016Q2:1.12.0.12 pkgsrc-2016Q2-base:1.12 pkgsrc-2016Q1:1.12.0.10 pkgsrc-2016Q1-base:1.12 pkgsrc-2015Q4:1.12.0.8 pkgsrc-2015Q4-base:1.12 pkgsrc-2015Q3:1.12.0.6 pkgsrc-2015Q3-base:1.12 pkgsrc-2015Q2:1.12.0.4 pkgsrc-2015Q2-base:1.12 pkgsrc-2015Q1:1.12.0.2 pkgsrc-2015Q1-base:1.12 pkgsrc-2014Q4:1.11.0.44 pkgsrc-2014Q4-base:1.11 pkgsrc-2014Q3:1.11.0.42 pkgsrc-2014Q3-base:1.11 pkgsrc-2014Q2:1.11.0.40 pkgsrc-2014Q2-base:1.11 pkgsrc-2014Q1:1.11.0.38 pkgsrc-2014Q1-base:1.11 pkgsrc-2013Q4:1.11.0.36 pkgsrc-2013Q4-base:1.11 pkgsrc-2013Q3:1.11.0.34 pkgsrc-2013Q3-base:1.11 pkgsrc-2013Q2:1.11.0.32 pkgsrc-2013Q2-base:1.11 pkgsrc-2013Q1:1.11.0.30 pkgsrc-2013Q1-base:1.11 pkgsrc-2012Q4:1.11.0.28 pkgsrc-2012Q4-base:1.11 pkgsrc-2012Q3:1.11.0.26 pkgsrc-2012Q3-base:1.11 pkgsrc-2012Q2:1.11.0.24 pkgsrc-2012Q2-base:1.11 pkgsrc-2012Q1:1.11.0.22 pkgsrc-2012Q1-base:1.11 pkgsrc-2011Q4:1.11.0.20 pkgsrc-2011Q4-base:1.11 pkgsrc-2011Q3:1.11.0.18 pkgsrc-2011Q3-base:1.11 pkgsrc-2011Q2:1.11.0.16 pkgsrc-2011Q2-base:1.11 pkgsrc-2011Q1:1.11.0.14 pkgsrc-2011Q1-base:1.11 pkgsrc-2010Q4:1.11.0.12 pkgsrc-2010Q4-base:1.11 pkgsrc-2010Q3:1.11.0.10 pkgsrc-2010Q3-base:1.11 pkgsrc-2010Q2:1.11.0.8 pkgsrc-2010Q2-base:1.11 pkgsrc-2010Q1:1.11.0.6 pkgsrc-2010Q1-base:1.11 pkgsrc-2009Q4:1.11.0.4 pkgsrc-2009Q4-base:1.11 pkgsrc-2009Q3:1.11.0.2 pkgsrc-2009Q3-base:1.11 pkgsrc-2009Q2:1.10.0.2 pkgsrc-2009Q2-base:1.10 pkgsrc-2009Q1:1.9.0.16 pkgsrc-2009Q1-base:1.9 pkgsrc-2008Q4:1.9.0.14 pkgsrc-2008Q4-base:1.9 pkgsrc-2008Q3:1.9.0.12 pkgsrc-2008Q3-base:1.9 cube-native-xorg:1.9.0.10 cube-native-xorg-base:1.9 pkgsrc-2008Q2:1.9.0.8 pkgsrc-2008Q2-base:1.9 cwrapper:1.9.0.6 pkgsrc-2008Q1:1.9.0.4 pkgsrc-2008Q1-base:1.9 pkgsrc-2007Q4:1.9.0.2 pkgsrc-2007Q4-base:1.9 pkgsrc-2007Q3:1.8.0.14 pkgsrc-2007Q3-base:1.8 pkgsrc-2007Q2:1.8.0.12 pkgsrc-2007Q2-base:1.8 pkgsrc-2007Q1:1.8.0.10 pkgsrc-2007Q1-base:1.8 pkgsrc-2006Q4:1.8.0.8 pkgsrc-2006Q4-base:1.8 pkgsrc-2006Q3:1.8.0.6 pkgsrc-2006Q3-base:1.8 pkgsrc-2006Q2:1.8.0.4 pkgsrc-2006Q2-base:1.8 pkgsrc-2006Q1:1.8.0.2 pkgsrc-2006Q1-base:1.8 pkgsrc-2005Q4:1.7.0.8 pkgsrc-2005Q4-base:1.7 pkgsrc-2005Q3:1.7.0.6 pkgsrc-2005Q3-base:1.7 pkgsrc-2005Q2:1.7.0.4 pkgsrc-2005Q2-base:1.7 pkgsrc-2005Q1:1.7.0.2 pkgsrc-2005Q1-base:1.7 pkgsrc-2004Q4:1.6.0.8 pkgsrc-2004Q4-base:1.6 pkgsrc-2004Q3:1.6.0.6 pkgsrc-2004Q3-base:1.6 pkgsrc-2004Q2:1.6.0.4 pkgsrc-2004Q2-base:1.6 pkgsrc-2004Q1:1.6.0.2 pkgsrc-2004Q1-base:1.6 pkgsrc-2003Q4:1.5.0.4 pkgsrc-2003Q4-base:1.5 netbsd-1-6-1:1.5.0.2 netbsd-1-6-1-base:1.5 netbsd-1-6:1.3.0.8 netbsd-1-6-RELEASE-base:1.3 pkgviews:1.3.0.4 pkgviews-base:1.3 buildlink2:1.3.0.2 buildlink2-base:1.3 netbsd-1-5-PATCH003:1.3; locks; strict; comment @# @; 1.20 date 2023.05.13.13.06.46; author nikita; state Exp; branches; next 1.19; commitid YJxZvKnJwcVURNoE; 1.19 date 2020.06.26.07.46.00; author otis; state Exp; branches; next 1.18; commitid UZzfk6Wmh1dvSHdC; 1.18 date 2019.02.18.16.30.26; author schmonz; state Exp; branches; next 1.17; commitid LOB9Mfu1Ia08FgcB; 1.17 date 2019.02.12.04.43.52; author maya; state Exp; branches; next 1.16; commitid BdGNegS97H5yWqbB; 1.16 date 2018.01.16.07.18.45; author maya; state Exp; branches; next 1.15; commitid D3RaTqgsYugQo4nA; 1.15 date 2017.01.05.17.14.52; author maya; state Exp; branches; next 1.14; commitid lFL1hit8jDBOMNAz; 1.14 date 2016.09.21.20.53.57; author maya; state Exp; branches; next 1.13; commitid hgbw97q5wJHpocnz; 1.13 date 2016.08.14.21.10.35; author maya; state Exp; branches; next 1.12; commitid 4e4Bqa33e5fzIjiz; 1.12 date 2015.01.06.12.40.06; author mef; state Exp; branches 1.12.12.1; next 1.11; commitid VwPeOfDqfRv3JX4y; 1.11 date 2009.07.27.12.59.44; author obache; state Exp; branches; next 1.10; 1.10 date 2009.06.14.17.37.46; author joerg; state Exp; branches; next 1.9; 1.9 date 2007.10.13.16.27.14; author adrianp; state Exp; branches; next 1.8; 1.8 date 2006.01.17.21.45.52; author veego; state Exp; branches; next 1.7; 1.7 date 2005.03.19.15.32.25; author jmmv; state Exp; branches; next 1.6; 1.6 date 2003.12.04.10.43.10; author veego; state Exp; branches; next 1.5; 1.5 date 2002.12.02.12.19.19; author jmmv; state Exp; branches 1.5.4.1; next 1.4; 1.4 date 2002.11.21.13.00.02; author grant; state Exp; branches; next 1.3; 1.3 date 2002.03.20.00.39.19; author hubertf; state Exp; branches; next 1.2; 1.2 date 2002.02.17.22.41.39; author hubertf; state Exp; branches; next 1.1; 1.1 date 2001.10.31.20.06.35; author zuntum; state Exp; branches; next ; 1.12.12.1 date 2016.09.24.09.48.32; author bsiegert; state Exp; branches; next ; commitid VUlAOzlIB9k5Dwnz; 1.5.4.1 date 2003.12.12.11.53.48; author agc; state Exp; branches; next ; desc @@ 1.20 log @irssi: update to version 1.4.4 Changelog (taken from https://irssi.org/NEWS/): 1.4.4 The Irssi team released this 2023-03-31 Changes Expose location of signals.txt via pkg-config (codeberg!1, #1439, #1446, #1447). By Andrej Kacian Additions Levels can now be inverted using ^ prefix in the /WINDOW (HIDE)LEVEL commands (#1428) Support receiving monospace (#1370, #1442). By Linus Heckemann Fixes Fix config broken by /WINDOW LOGFILE without parameter (#1392, #1432) Fix broken /LASTLOG -window switch (#1418, #1424, regression introduced in #1398) Fix logic in how actions are printed for other protocols (codeberg!3, #1454). By Andrej Kacian Fix stale special collector use after free (#1456). Reported by ednash Help and message fixes (#1421, #1429, #1431, #1434, #1438, #1452, #1453, #1455). Includes work by Jimmie Tyrrell and Sven Grewe 1.4.3 The Irssi team released this 2022-10-31 Fixes Fix freeze on Alt+arrows (#1416, #1417) Fix crash on /upgrade (#1399, #1419) Fix saving of -disallow_starttls (#1401, #1420) Fix libnv detection on FreeBSD (freebsd#265397, #1407). By Guido Falsi and Kristof Provost Minor help and script fixes (#1380, #1393, #1411, #1413, #1414, #1415) 1.4.2 The Irssi team released this 2022-07-17 Changes Add irssimoduledir to irssi-1.pc in the Meson build (#1383, #1378) Fixes Use -isystem includes, limiting warnings to Irssi code. Fixes compilation with Perl 5.36 (#1381, gentoo#851522, #1384) Fix missing lines when changing dynamic textbuffer contents (#1382, #1387). Reported by externalserver15 Fix Perl cross compilation with Meson 0.60.0 (#1377) Fix default channel prefix used for /JOIN to default to # (#1385, #1388) Fix crash in /LASTLOG by getting line texts before printing (#1367, #1398) 1.4.1 The Irssi team released this 2022-06-12 Note: botti no longer compiles; get in touch if you use it Changes Format the output of /QUOTE HELP (#1371, an#82). By Val Lorentz. Add /SHELP as default alias (an#83) /SET resolve_reverse_lookup setting was removed (#1034, #1135) Irssi will try to connect on IPv4 if IPv6 connection failed (#1146). By Shivaram Lingamneni The display system now renders formats on the fly (#1079, #1188, #1191, #1192, #1204, #1205, #1209, #1349, #1355, an#13, an#14, an#28, an#29, an#36, an#37, an#49) This major change will break scripts that try to modify printed text during “print text” signal (#1189). They need to be ported to modify the text during “print format” instead. It also breaks the usage of using /FORMAT to add different colours to a line. Such usage needs to be ported to using $expando variables instead. Affected scripts include format_identify.pl, friends_peder.pl, nickcolor.pl, nm.pl, people.pl The “gui print text finished” and “gui print text after finished” signals gained a TEXT_DEST_REC *parameter in the process. A new “gui render line text” signal is available to change the rendering of a line made the $Z expando (time) dynamic (#1087, #1207, #1208) This change breaks the usage of /SET timestamp_format to supply a custom displayed time stamp. Affected scripts include binary_time.pl /HILIGHT -priority now affects which hilight rule gets applied (#1228, #1232) The NAMES list is now hidden by default if there are more than 18 users on the channel (an#7) To revert to the previous behaviour /SET show_names_on_join_limit -1 -tls_verify is now enabled by default (#1170, an#18, #1309, an#23, #1343, #1351) This may cause an ugly display of notls_verify in the output of /SERVER LIST, even on plain-text connection, on old configs. Kindly remove the “tls_verify = “no”;” entries from your config file manually. Irssi will now attempt STARTTLS if advertised (#1170, #1312, an#19) Use -disallow_starttls if you absolutely do not want this In order to check for a STARTTLS advertisement, Irssi will now wait for a response (even an error) to CAP LS 302. If your bouncer/server does not want to communicate before receiving USER/PASS at all, use -nocap to disable the CAP check. Channel sync requests (WHO, MODE) are now sent “later” than user commands. This should improve responsiveness to user commands in the autojoin phase (#1300, an#26, an#32, an#33) Irssi is now using full paths in #include directives and consequently does not add all directories to the include path anymore (#1040) The Build System was ported to Meson (#1064, #1065, #1068, #1071, #1072, #1073, #1074, #1075, #1084, #1085, #1118, #1166, #1223, #1224, #1245, #1313, #1314, an#31) Scriptassist was changed to use a YAML database (#1163) It will tell you when you need to update your setting /BIND shows all partial matches (#1155) Cleanup of unused functions (#1017, #1132, #1145, #1182, #1246, #1264) Functions removed: NET_CALLBACK NET_HOST_CALLBACK RESOLVED_NAME_REC net_gethostbyaddr_nonblock net_connect_nonblock [ SIMPLE_THREAD_REC, simple_init, simple_readpipe ] hash_save_key Functions deprecated: dec2octal g_timeval_cmp get_timeval_diff Function names corrected: g_input -> i_input g_istr -> i_istr g_io_channel -> i_io_channel g_hash_free_value -> i_hash_free_value remove g_free_true gslist -> i_slist glog_func -> i_log_func glist -> i_list If multi-version compatibility is desired, module authors can find an example of backwards compatible code in cdidier/irssi-xmpp#55 Additions GLib log message filter: /SET glib_log_domains (an#50, an#59). By Andrej Kacian An option to clear the cutbuffer: /SET empty_kill_clears_cutbuffer (an#58). By Mikael Magnusson Scriptable pastebin (an#60, an#88) Configurable actlist separator: /SET actlist_separator (#1364, an#61) Add MSGLEVEL_HIDDEN to Perl (#1044) Add $view->set_hidden_level and $view->remove_lines_by_level to Perl (#1026) Add a /SET scrollback_max_age setting (#1022). By Heikki Orsila Add /SET actlist_prefer_window_name (#1025) Add -window option to /CAT (#1023, #1159) Add an option to list specific sections with /SET -section lookandfeel (#1048) Add support for IRCv3 CAP LS 302 (#1091) Add a new “print noformat” signal that goes together with “print format” (#1088, #1192) Add support for IRCv3 extended-join. /SET show_extended_join to enable (#1097, #1107, #1124) There are two new /FORMATs, join_extended and join_extended_account, that theme writers need to take into account if desired. Add support for IRCv3 setname (#1093, #1104, #1254, GL#33) Add support for IRCv3 account-notify (#1100, #1098, GL#33, #1105, #1131). Credit to oss-fuzz /SET show_account_notify to enable Add support for IRCv3 invite-notify (#1094) Add support for receiving IRCv3 message-tags (#576, #1090) Add support for sending IRCv3 message-tags (#1092, an#34) Enable the znc.in/self-message CAP by default (#1123) Add support for IRCv3 away-notify. /SET away_notify_public to enable (#1099, GL#33, #1105) Add support for IRCv3 chghost (#1096, GL#33, #1105) For servers with broken chghost implementation that fill the status window with host changed messages, one may add “quote cap req -chghost” to the -autosendcmd or, if the host change messages are entirely undesired, “/format -delete host_changed” Add support for IRCv3 server-time. /SET show_server_time to enable (#1108) Add support for logging IRCv3 server-time. /SET log_server_time to disable (#1318, an#16) Add IRCv3 features to signals.txt (#1111) In particular, “message join” now takes 2 additional arguments, script and module authors must beware of this change. Show the unignore time in /IGNORE output (#1158, #1161) Add /SET quit_on_hup to make the behaviour of SIGHUP configurable (#828, #1169). By Pinguin1234 Support numeric 489 as ERR_SECUREONLYCHAN (#1193, #1196). By Michael Hansen Improve support for building Irssi in Termux-Android with Meson (#1199) Add usermode key to Irssi::Irc::Chatnet in Perl (#1288). By Jessica Sophie Porter Add format_string_expand and format_string_unexpand functions to Perl (#1286) Add …->format_create_dest(…)->printformat(“format”, args…) and …->printformat_module(“module”, “format”, args…) methods to Perl (#1284) You can avoid any CORE::GLOBAL::caller hacks using the printformat_module method, especially sind that hack was not safe during signal emissions Add tracking of user accounts in the channel nicklist using WHOX on join (#1250) Add auto-loading of the Perl and otr module from /SET autoload_modules (#1295) Add /IGNORE … NOHILIGHT to ignore some hilights (#1260) Do not beep on hidden lines with /SET beep_msg_level … -HIDDEN (#1259) Added /CS, /MS, /NS, and /OS aliases to the default config (#1316). By Mathis Beer Allow -tls_ca{file,path} ‘’ to unset an argument (#730, #1060, an#30) Add a “server outgoing modify” signal to intercept outgoing messages (#1148, #1151, an#15, an#43). Original by JustAnotherArchivist Fixes Fix window left/right not skipping visible windows (an#57). By Mikael Magnusson Fix wrong printf-format on OpenBSD (an#66, an#68). Reported by Aaron Bieber Fix erroneous output produced by autoload_modules (an#72) Fix scroll_page_count setting with . (#1365, an#76) Fix memory leak in /IGNORE (#1373, an#84). Found by Jookia Misc fixes (an#45, an#67, an#70, #1368, an#77) CHANTYPES take precedence over (missing) STATUSMSG in /join (#1358, an#54) Fix crash in Perl’s $view->set_bookmark (freebsd#254237, an#56) Minor help fixes (an#51, an#52) Fix regression where own channel status was forgotten after /UPGRADE (#1357, an#53) remove some hard-coded 510 byte assumptions (#1086) Several fixes for error checks in SSL (#944, #1037, #943, #1036). Reported by Chi Li Wrong variable tested in mask_match (#902, #1035) Fix bug where irssi-proxy with ?-port would not reconnect (#1041) Allow shrinking of /SET rawlog_lines (#957, #1020). By Marcus “Teschi” Prinz Fix /WINDOW BALANCE warning (#1054) fix overflow when first command history entry expires (#1070) begin modularising IRC module (#1067, #1112, #1113) fix some memory leaks in /DCC RESUME and settings_add (#1077). By Zero King fix cut-off text with theme_indent module and /SET indent_always OFF (#1078) fix the cap_queue order (#1095) add reference counted strings (#1089) Fix irc_op_public messages not triggering hilights (#354, #891, #1129). By Dan Collins Fix /IGNORE not setting the right level in irc_op_public messages (#1280). Credit to oss-fuzz Fix GTimeVal deprecation (#1141, #1144, #1145, #1350, an#44) If multi-version compatibility is desired, module authors can find an example of backwards compatible code in cdidier/irssi-xmpp#53 Fix /IGNORE … MODES NO_ACT not working (#1164) Deprecated -ssl* options are hidden from tab completion (#1171) Make /SET actlist_sort a choice type (#1198) Fix crash from self-unloading script (#1206). By Thomas Stagner Fix crash during Perl signal emission (#1233, #1234) Fix a case where empty lines or comments inside channels or servers in the config would confuse Irssi (#1062, #1242, #1243) Fix reported freezing in DCC GET on slow disks (#159, #1271) Fix message-tags parsing (#1274, #1275). Credit to oss-fuzz Fail redirects when receiving numeric 263 (RPL_TRYAGAIN) in response to /WHO (#1283) Some updates to .gitignore (#1302). By Rene Kita Fix build on operating systems with X/Open Curses, version 2 (#1305, #1308). By Nia Alarie (Regression introduced with #1290, alternative fix for Irssi 1.2.3 no-term.h.patch) Fix otr module not using g_strndup, e.g. on Solaris 10 (#1315). By Claes Nästén Fix cursor getting stuck for auto completions that changes case (#1176, #1322, an#8). By ffrogman Restore operation of tag/* in /SET activity_hide_targets (#1337, an#11) nb. the ::all syntax was working in Irssi 1.1 and 1.2 (and continues to work) Fix /SERVER ADD -matrix -network my_matrix_network (an#12). By Andrej Kacian Fix /SERVER ADD creating duplicated entries in the config file (#1317, an#22, an#41) Fix critical when SASL user is set and SASL password is empty (#1325, an#21) Misc fixes (#1106, #1141, #1272, #1297, an#35) Fuzz fixes (#1116, #1117, #1119, #1125, #1126, an#20) Build system fixes (#1101, #1102, #1069, #1140, #1181, #1253) Sync docs and scripts (an#39) Text and Help updates add -tls_* options to manual (#1029, #1030). By Jacob V. Rasmussen missing targets in /MSG (#1032) wrong parameter in /ECHO (#1024) Spelling in OTR (#1047). By David Gall Clarify statusbar priority (#1049). By Marius Gedminas Document get_irssi_dir in Perl (#1051, #1052). By Alex Shafer typo in /HILIGHT help (#1081). By DFrostByte improved clarity of your_nick_owned (#1138). By Mike Quin Update some URLs to https (#1163) Add documentation for escaping some characters (#1329, #1330, an#9). By Guntbert Reiter Fix some typos (#1336, an#10). By Francis Mteo Document $abiversion and parse_special (an#38). By bw1 Infrastructure updates: Support for Github Actions (#1039, #1103, #1160, #1212, #1231, #1252, #1261, an#40) Run clang-format on pull requests (#1172, #1173, #1184, #1230, #1247, #1287) Run abidiff on pull requests (#1179, #1195) Test CI-Fuzz (#1279, #1304, an#17) @ text @@@comment $NetBSD: PLIST,v 1.19 2020/06/26 07:46:00 otis Exp $ bin/irssi include/irssi/irssi-config.h include/irssi/irssi-version.h include/irssi/src/common.h include/irssi/src/core/args.h include/irssi/src/core/capsicum.h include/irssi/src/core/channel-rec.h include/irssi/src/core/channel-setup-rec.h include/irssi/src/core/channels-setup.h include/irssi/src/core/channels.h include/irssi/src/core/chat-protocols.h include/irssi/src/core/chatnet-rec.h include/irssi/src/core/chatnets.h include/irssi/src/core/commands.h include/irssi/src/core/core.h include/irssi/src/core/expandos.h include/irssi/src/core/ignore.h include/irssi/src/core/iregex.h include/irssi/src/core/levels.h include/irssi/src/core/line-split.h include/irssi/src/core/log.h include/irssi/src/core/masks.h include/irssi/src/core/misc.h include/irssi/src/core/module.h include/irssi/src/core/modules-load.h include/irssi/src/core/modules.h include/irssi/src/core/net-disconnect.h include/irssi/src/core/net-nonblock.h include/irssi/src/core/net-sendbuffer.h include/irssi/src/core/network-openssl.h include/irssi/src/core/network.h include/irssi/src/core/nick-rec.h include/irssi/src/core/nicklist.h include/irssi/src/core/nickmatch-cache.h include/irssi/src/core/pidwait.h include/irssi/src/core/queries.h include/irssi/src/core/query-rec.h include/irssi/src/core/rawlog.h include/irssi/src/core/recode.h include/irssi/src/core/refstrings.h include/irssi/src/core/server-connect-rec.h include/irssi/src/core/server-rec.h include/irssi/src/core/server-setup-rec.h include/irssi/src/core/servers-reconnect.h include/irssi/src/core/servers-setup.h include/irssi/src/core/servers.h include/irssi/src/core/session.h include/irssi/src/core/settings.h include/irssi/src/core/signals.h include/irssi/src/core/special-vars.h include/irssi/src/core/tls.h include/irssi/src/core/utf8.h include/irssi/src/core/window-item-def.h include/irssi/src/core/window-item-rec.h include/irssi/src/core/write-buffer.h include/irssi/src/fe-common/core/chat-completion.h include/irssi/src/fe-common/core/command-history.h include/irssi/src/fe-common/core/completion.h include/irssi/src/fe-common/core/fe-capsicum.h include/irssi/src/fe-common/core/fe-channels.h include/irssi/src/fe-common/core/fe-common-core.h include/irssi/src/fe-common/core/fe-core-commands.h include/irssi/src/fe-common/core/fe-exec.h include/irssi/src/fe-common/core/fe-messages.h include/irssi/src/fe-common/core/fe-queries.h include/irssi/src/fe-common/core/fe-recode.h include/irssi/src/fe-common/core/fe-settings.h include/irssi/src/fe-common/core/fe-tls.h include/irssi/src/fe-common/core/fe-windows.h include/irssi/src/fe-common/core/formats.h include/irssi/src/fe-common/core/hilight-text.h include/irssi/src/fe-common/core/keyboard.h include/irssi/src/fe-common/core/module-formats.h include/irssi/src/fe-common/core/module.h include/irssi/src/fe-common/core/printtext.h include/irssi/src/fe-common/core/themes.h include/irssi/src/fe-common/core/window-activity.h include/irssi/src/fe-common/core/window-items.h include/irssi/src/fe-common/core/windows-layout.h include/irssi/src/fe-common/irc/dcc/fe-dcc.h include/irssi/src/fe-common/irc/dcc/module-formats.h include/irssi/src/fe-common/irc/dcc/module.h include/irssi/src/fe-common/irc/fe-irc-channels.h include/irssi/src/fe-common/irc/fe-irc-server.h include/irssi/src/fe-common/irc/module-formats.h include/irssi/src/fe-common/irc/module.h include/irssi/src/fe-common/irc/notifylist/module-formats.h include/irssi/src/fe-common/irc/notifylist/module.h include/irssi/src/fe-text/gui-printtext.h include/irssi/src/fe-text/gui-windows.h include/irssi/src/fe-text/mainwindows.h include/irssi/src/fe-text/statusbar-item.h include/irssi/src/fe-text/statusbar.h include/irssi/src/fe-text/term.h include/irssi/src/fe-text/textbuffer-formats.h include/irssi/src/fe-text/textbuffer-view.h include/irssi/src/fe-text/textbuffer.h include/irssi/src/irc/core/bans.h include/irssi/src/irc/core/channel-events.h include/irssi/src/irc/core/channel-rejoin.h include/irssi/src/irc/core/ctcp.h include/irssi/src/irc/core/irc-cap.h include/irssi/src/irc/core/irc-channels.h include/irssi/src/irc/core/irc-chatnets.h include/irssi/src/irc/core/irc-commands.h include/irssi/src/irc/core/irc-masks.h include/irssi/src/irc/core/irc-nicklist.h include/irssi/src/irc/core/irc-queries.h include/irssi/src/irc/core/irc-servers-setup.h include/irssi/src/irc/core/irc-servers.h include/irssi/src/irc/core/irc.h include/irssi/src/irc/core/mode-lists.h include/irssi/src/irc/core/modes.h include/irssi/src/irc/core/module.h include/irssi/src/irc/core/netsplit.h include/irssi/src/irc/core/sasl.h include/irssi/src/irc/core/servers-idle.h include/irssi/src/irc/core/servers-redirect.h include/irssi/src/irc/dcc/dcc-chat.h include/irssi/src/irc/dcc/dcc-file-rec.h include/irssi/src/irc/dcc/dcc-file.h include/irssi/src/irc/dcc/dcc-get.h include/irssi/src/irc/dcc/dcc-queue.h include/irssi/src/irc/dcc/dcc-rec.h include/irssi/src/irc/dcc/dcc-send.h include/irssi/src/irc/dcc/dcc-server.h include/irssi/src/irc/dcc/dcc.h include/irssi/src/irc/dcc/module.h include/irssi/src/irc/flood/module.h include/irssi/src/irc/notifylist/module.h include/irssi/src/irc/notifylist/notify-setup.h include/irssi/src/irc/notifylist/notifylist.h include/irssi/src/lib-config/iconfig.h include/irssi/src/lib-config/module.h lib/irssi/modules/libirc_proxy.la lib/pkgconfig/irssi-1.pc ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/Irssi.pm ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/Irssi/Irc.pm ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/Irssi/TextUI.pm ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/Irssi/UI.pm ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/.packlist ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/Irc/.packlist ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/Irc/Irc.${MODULEEXT} ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/Irssi.${MODULEEXT} ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/TextUI/.packlist ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/TextUI/TextUI.${MODULEEXT} ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/UI/.packlist ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/UI/UI.${MODULEEXT} man/man1/irssi.1 share/doc/irssi/capsicum.txt share/doc/irssi/design.html share/doc/irssi/design.txt share/doc/irssi/faq.html share/doc/irssi/faq.txt share/doc/irssi/formats.txt share/doc/irssi/manual.txt share/doc/irssi/perl.txt share/doc/irssi/signals.txt share/doc/irssi/special_vars.txt share/doc/irssi/startup-HOWTO.html share/doc/irssi/startup-HOWTO.txt share/examples/irssi/irssi.conf share/irssi/help/accept share/irssi/help/action share/irssi/help/admin share/irssi/help/alias share/irssi/help/away share/irssi/help/ban share/irssi/help/beep share/irssi/help/bind share/irssi/help/cat share/irssi/help/cd share/irssi/help/channel share/irssi/help/clear share/irssi/help/completion share/irssi/help/connect share/irssi/help/ctcp share/irssi/help/cycle share/irssi/help/dcc share/irssi/help/dehilight share/irssi/help/deop share/irssi/help/devoice share/irssi/help/die share/irssi/help/disconnect share/irssi/help/echo share/irssi/help/eval share/irssi/help/exec share/irssi/help/flushbuffer share/irssi/help/format share/irssi/help/hash share/irssi/help/help share/irssi/help/hilight share/irssi/help/ignore share/irssi/help/info share/irssi/help/invite share/irssi/help/irssiproxy share/irssi/help/ison share/irssi/help/join share/irssi/help/kick share/irssi/help/kickban share/irssi/help/kill share/irssi/help/knock share/irssi/help/knockout share/irssi/help/lastlog share/irssi/help/layout share/irssi/help/levels share/irssi/help/links share/irssi/help/list share/irssi/help/load share/irssi/help/log share/irssi/help/lusers share/irssi/help/map share/irssi/help/me share/irssi/help/mircdcc share/irssi/help/mode share/irssi/help/motd share/irssi/help/msg share/irssi/help/names share/irssi/help/nctcp share/irssi/help/netsplit share/irssi/help/network share/irssi/help/nick share/irssi/help/notice share/irssi/help/notify share/irssi/help/op share/irssi/help/oper share/irssi/help/otr share/irssi/help/part share/irssi/help/ping share/irssi/help/query share/irssi/help/quit share/irssi/help/quote share/irssi/help/rawlog share/irssi/help/recode share/irssi/help/reconnect share/irssi/help/rehash share/irssi/help/reload share/irssi/help/restart share/irssi/help/rmreconns share/irssi/help/rmrejoins share/irssi/help/save share/irssi/help/sconnect share/irssi/help/script share/irssi/help/scrollback share/irssi/help/server share/irssi/help/servlist share/irssi/help/set share/irssi/help/silence share/irssi/help/squery share/irssi/help/squit share/irssi/help/stats share/irssi/help/statusbar share/irssi/help/time share/irssi/help/toggle share/irssi/help/topic share/irssi/help/trace share/irssi/help/ts share/irssi/help/unalias share/irssi/help/unban share/irssi/help/unignore share/irssi/help/unload share/irssi/help/unnotify share/irssi/help/unquery share/irssi/help/unsilence share/irssi/help/upgrade share/irssi/help/uptime share/irssi/help/userhost share/irssi/help/ver share/irssi/help/version share/irssi/help/voice share/irssi/help/wait share/irssi/help/wall share/irssi/help/wallops share/irssi/help/who share/irssi/help/whois share/irssi/help/whowas share/irssi/help/window share/irssi/scripts/autoop.pl share/irssi/scripts/autorejoin.pl share/irssi/scripts/buf.pl share/irssi/scripts/command.pl share/irssi/scripts/dns.pl share/irssi/scripts/kills.pl share/irssi/scripts/mail.pl share/irssi/scripts/mlock.pl share/irssi/scripts/msg-event.pl share/irssi/scripts/quitmsg.pl share/irssi/scripts/redirect.pl share/irssi/scripts/scriptassist.pl share/irssi/scripts/usercount.pl share/irssi/themes/colorless.theme share/irssi/themes/default.theme @ 1.19 log @irssi: Do not install perllocal.pod Do not install perllocal.pod to avoid file conflict. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.18 2019/02/18 16:30:26 schmonz Exp $ d41 1 d96 1 d137 1 a278 1 share/irssi/irssi-config @ 1.18 log @Modules are .bundle on Darwin. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.17 2019/02/12 04:43:52 maya Exp $ a134 1 ${PLIST.perl}${PERL5_SUB_INSTALLARCHLIB}/perllocal.pod @ 1.17 log @irssi: update to 1.2.0. pkgsrc changes: ssl option removed as it no longer works (it was default on) Changes Improved the /STATUSBAR commands (#858) /SET no longer shows = between setting and value (#886) /CUBES removed from default config (available as script) (#956) /1 /2 /3 … removed from default config (available as new setting window_number_commands) (#958) Always redraw the screen on resize. By David Phillips (#896) Private notices intended for channels are now displayed on the channel (new setting notice_channel_context) (#959) Additions Imported the “Off-the-record” module into Irssi tree (#854, #589, #196) Initial support for sideways split windows (#697, #431, #224, #807, FS#310, #947, #955, #989) Change the implementation of wcwidth. This is used to calculate the width of emojis on your terminal screen (#917, #720) Make the wcwidth functions available from Perl (#973): string_width(str) string_chars_for_width(str, width) wcwidth(char) Added completion_keep_word setting (#979) Allow activity_hide_targets to hide activity in itemless windows (#967, #997, #1001, #1003) Added activity_hide_visible setting (#990) Allow hiding of lines through the /IGNORE system (#901, #900, #892, #890, #884, #937) Add window_default_hidelevel setting. By Doug Freed (#941) Add activity_hide_window_hidelevel setting, defaulting to ON (#938) Add autolog_only_saved_channels setting, to autolog only channels that are in the config (#968) Add format support for the input line. By Ben Paxton, originally by Jonas Hurrelmann (#764, FS#621, #1004) use Irssi::TextUI; gui_input_set_extent(pos, text) gui_input_set_extents(pos, len, left, right) gui_input_clear_extents(pos, len) gui_input_get_extent(pos) gui_input_get_text_and_extents() gui_input_set_text_and_extents(…) Parsing of IRCv3 CAP 3.2 (#775, #869) Show CAP-related events in the user interface (#918, #916, #870, #704) Continue using separators when addressing multiple nicks with tab completion. By Manish Goregaokar (#822) Bind Shift-tab by default. By Niklas Luokkala (#830, #829) Fuzzing more things (#913, #780, #813) Fixes Disconnect SASL properly in case the SASL module got unloaded from server (#931, #629, #618, #616) Fix backward completion jumping to the first instead of last word (#979) Improve empty topic handling (#961, #905, #911, #897, #888) Prevent config truncation when no space left. By dequis and Lukas Waymann (#922, #925, #910, #909, #906, #871, #817) Also time-out servers in lookup phase (#866, #130) Fix build with LibreSSL 2.7. By Dorian Harmans (#865) Fix a crash when appending to a textbuffer without line. Reported by Jari Matilainen (#862) Fix segfault on sending large messages (#803, #796, #802) Fix segfault on invalid statusbar config (#993, #994) Fix random memory writes on restoring queries of foreign protocols (#999, #1000) Make default keybinds deletable (#859, #507) Fix freeze when resizing Irssi very small (#946) Compare channels case-insensitively, avoiding confusions with the config file (#857, #856) Fix DCC GET on Android. By Martin Staron (#844) Improve rawlog performance (#957) Fix nick escaping erroneously escaping quotes (#978, #974, #709) Protect against theme recursion, improve padding performance, limit alignment padding. Credit to Oss-Fuzz (#835, #851, #850, #846, #848) Fix recursive loop in replaces (#833, GL#23) Fix headers for compilation of C modules (#939) Documentation. By Zero King (#814). (#852) Sync NEWS, docs, scripts (#849, #855) Build system (#868, #867, #985, #988) Fix build on IBM i and AIX. By Calvin Buckley (#975) Misc fixes (#840, #839, #843, #953, #962). Tests (#806, #875, #905, #964, #1011). Fuzzing (#929). @ text @d1 1 a1 1 @@comment $NetBSD$ d142 2 a143 2 ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/Irc/Irc.so ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/Irssi.so d145 1 a145 1 ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/TextUI/TextUI.so d147 1 a147 1 ${PLIST.perl}${PERL5_SUB_INSTALLVENDORARCH}/auto/Irssi/UI/UI.so @ 1.16 log @irssi: update to 1.1.0 v1.1.0 2018-01-15 The Irssi team * Colour is now re-set when reaching a comma, matching mIRC behaviour (#742, #740, #790) * Irssi now shows the initial nick and name on first start (#785, #786) * lynx is no longer required to run autogen.sh (#81, #781) * The command history no longer permits wrapping around (#686) * /foreach now correctly sends arguments as commands, stopping you from embarassing AMSGs (#659) * /server does not connect to servers anymore, use /server connect to change servers (#559, #649). + Add an option to ignore all channels or ignore all queries using /set activity_hide_targets. By Jari Matilainen (#612, #779) + Add a startup warning if the TERM var is wrong inside tmux/screen (#726) + Add option to hide certain levels from the textbuffer using /window hidelevel (#746, #808) + Irssi now has its first unit test (for mode parsing). By Will Storey (#793) + Added access to global command history when using window history, and a binding to erase entries from the command history (erase_history_entry) (#762) + -alternate_nick is now available as a network specific property. By Paul Townsend (#120, #771) + On FreeBSD, Irssi now supports Capsicum sandbox (/capsicum enter). By Edward Tomasz Napierala (#735, #755, #772) + Filenames (directories) ending with a / now tab-complete (#741) + UTF-8 should now work in regular expressions when using GRegex (the default) (#636, #653) + Nicks are now properly escaped on completion. By Oscar Linderholm (#693, #709) + /server add -port now works. By Jari Matilainen (#703) + Add a setting key_timeout to make key sequences automatically re-set when not finished (#644, #645) + Warn users about expired client certificates, as servers may refuse them (#211, #627) + Add a new net_start_ssl function for StartTLS. This is available from ABI 8 and can be used by protocol modules (#615, #622). + The %# code is now stored in the textbuffer, so for example web scripts can make use of it (#626) + Add new setting break_wide which can be used to enable breaking of wide characters (for east-asian users). Originally from FreeBSD ports. (#625) + Add fuzzing code (#610, #620, #701, #713) - Netsplits show properly again (#812) - Do not error on blank lines when using /exec -o. By Fabian Kurz (FS#902, #805) - Detect used nickname as reported by server. By Alexandre Morignot (#219, #804) - Prevent use after free error during the execution of some commands. Found by Joseph Bisch. (GL#17, GL!24) - Fix MODE parameter parsing when colon was used at a place Irssi didn't expect (#601, #766) - Fixed code to compile with -Werror=declaration-after-statement (#795) - Clang-format is now supported for git-clang-format (#784) - Fix use after free when changing the network of hilights. Reported by Rui Mathias. (#787, #788) - Fix positioning error when tab-completing non-ascii strings. (#752, #754) - In-development issues (#750, #751) - Clarify Alis in /help list (#699, #712) - Improve /lastlog performance from O(N^2) to O(N) (#715) - Fix a segfault on "script destroyed" signal. By Stephen Oberholtzer (#660, #661). - Fix early ISON error (#596, #647) - Documentation improvements. By Paolo Martini (#639). By Tristan Pepin (#731). By Paul Townsend (#684, #736). By Will Storey (#777) - Minor cleanups (#590). By Edward Tomasz Napierala (#734, #738). By Will Storey (#770) - Fix space issue in glib-2.0.m4 (#621) @ text @d89 3 d93 4 d98 1 d135 13 d150 1 d226 1 @ 1.15 log @irssi: update to 1.0.0 v1.0.0 2017-01-03 The Irssi team * Removed --disable-ipv6 (#408). * /connect Network now aborts with an error if no servers have been added to that network (#443). * /dcc commands now use quotes around spaces consistently. * bell_beeps was removed (#524, #565). * Switch to GRegex instead of regex.h (#412). + irssiproxy can now forward all tags through a single port. By Lukas Mai (mauke, #425). + irssiproxy can also listen on unix sockets. By Lukas Mai (#427). + send channel -botcmds immediately when no mask is specified (#175, #399). + the kill buffer now remembers consecutive kills. New bindings were added: yank_next_cutbuffer and append_next_kill By Todd A. Pratt (#353, #414, #455) + connections will avoid looking up IPv6 addresses if the machine does not have an IPv6 address assigned (exact behaviour is implementation defined, #410). + Fix potential crash if scripts insert undef values into the completion list (#413). + Paste warning is now also shown on pasting overlong lines. By Manish Goregaokar (#426). + autolog_ignore_targets and activity_hide_targets learn a new syntax tag/* and * to ignore whole networks or everything. By Jari Matilainen (vague666, #437) + /hilight got a -matchcase flag to hilight case sensitively. By Thibault B (isundil, #421, #476). + Always build irssi with TLS support. + Rename SSL to TLS in the code and add -tls_* versions of the -ssl_* options to /CONNECT and /SERVER, but make sure the -ssl_* options continue to work. + Use TLS for Freenode, EFnet, EsperNet, OFTC, Rizon, and IRC6 in the default configuration. + Display TLS connection information upon connect. You can disable this by setting tls_verbose_connect to FALSE. + Add -tls_pinned_cert and -tls_pinned_pubkey for x509 and public key pinning. The values needed for -tls_pinned_cert and -tls_pinned_pubkey is shown when connecting to a TLS enabled IRC server, but you can also find the values like this: Start by downloading the certificate from a given IRC server: $ openssl s_client -connect chat.freenode.net:6697 < /dev/null 2>/dev/null | \ openssl x509 > freenode.cert Find the value for -tls_pinned_cert: $ openssl x509 -in freenode.cert -fingerprint -sha256 -noout Find the value for -tls_pinned_pubkey: $ openssl x509 -in freenode.cert -pubkey -noout | \ openssl pkey -pubin -outform der | \ openssl dgst -sha256 -c | \ tr a-z A-Z + Remove support for DANE validation of TLS certificates. There wasn't enough support in the IRC community to push for this on the majority of bigger IRC networks. If you believe this should be reintroduced into irssi, then please come up with an implementation that does not rely on the libval library. It is causing a lot of troubles for our downstream maintainers. + /names and $[...] now uses utf8 string operations. By Xavier G. (#40, #411, #471, #480). + New setting completion_nicks_match_case (#488). + /channel /server /network now support modify subcommand. By Jari Matilainen (#338, #498). + Irssi::signal_remove now works with coderefs. By Tom Feist (shabble, #512). + /script reset got an -autorun switch (#540, #538). + cap_toggle can now be called from Perl, and fields cap_active and cap_supported can be inspected (#542). + Make it possible to disable empty line completion. By Lauri Tirkkonen (lotheac, #574). + New option sasl_disconnect_on_failure to disconnect when SASL log-in failed (#514). - IP addresses are no longer stored when resolve_reverse_lookup is used. - Removed broken support for curses (#521). - Removed broken dummy mode (#526). - Fix terminal state after suspend (#450, #452). - Improve Perl library path detection (#479, #132). - Reconnect now works on unix connections (#493). - Fix completion warnings (#125, #496, FS#124). - Fix a crash in the --more-- item (#501). - Fix a display issue in /unignore (#517, bdo#577202). - Fix a crash in some netsplits (#529, #500). - Fix crashes with some invalid config (#550, #551, #563, #564, #587, #581, #570). - Add support for SASL Fragmentation. By Kenny Root (kruton, #506). - Improve netsplit dumping (#420, #465). - Improve responsibility under DCC I/O strain (#578, #159). - Fix query nick change on open (#580, #586). - Correct a few help texts. @ text @d7 1 d19 1 d31 1 d59 1 d67 1 d128 1 d138 1 @ 1.14 log @irssi: update to 0.8.20, security fix. catch up with irssi-icb, irssi-xmpp distinfo (they grab irssi versioned file). comment out part of irssi-xmpp makefile which is breaking the build. irssi 0.8.20 changes: - Correct the name of an emitted sasl signal (#484) - Correct the prototype for the 'message private' signal (#515) - Corrections in away and hilight help text (#477, #518) - /squery and /servlist commands have been restored. - Where Irssi would previously only report "System error" on connect, it will now try harder to retrieve the system error message. - Fixed issue with +channels not working properly (#533) - Fixed crash in optchan when item has no server (#485) - Fixed random remote crash in the nicklist handling (#529) - Fixed remote crash due to incorrect bounds checking on formats, reported by Gabriel Campana and Adrien Guinet from Quarkslab. @ text @d48 2 d63 1 @ 1.13 log @Update irssi to 0.8.19 Changes: v0.8.19 2016-03-23 The Irssi team - Fixed regression when joining and parting channels on IRCnet (#435) - Fixed SASL EXTERNAL (#432) - Fixed regression when not using SASL (#438) - Fixed incorrect SSL disconnects when using SSL from modules/scripts (#439) - Fixed regression where proxy_string could not be configured or certain file transfers could not be accepted (#445) - Fixed storing layout of !channels (#183) - Fixed restoration of bracketed paste mode on quit (#449) - Make the usage of meta-O for cursor keys configurable with /set term_appkey_mode off v0.8.18 2016-02-13 The Irssi team * Modules will now require to define a void MODULENAME ## _abicheck(int *version) method to ensure that they are compiled against the correct Irssi version. * The signature of "message private" has been changed to 5: server, message, nick, address, target in order to support "self messages". Module authors should implement this change if they are using this signal. * Removing networks will now remove all attached servers and channels (#45). * The proxy module now has an /irssiproxy command. * sb_search has been moved to scripts.irssi.org * WIN32 has been completely removed (it had not been working and is lacking a maintainer.) * Garbage Collection support has been removed. This will hardly have any effect for anyone given that it has been unsupported for several years. + CAP SASL PLAIN login is now supported natively. + Paste bracket markers can be requested from terminal with /set paste_use_bracketed_mode on + "Self messages" generated by some bouncers can now be received in the proper window. + Try to split long lines on spaces to avoid words being splitted. Adds a new option: 'split_line_on_space' which defaults to on. + Add setting hilight_nick_matches_everywhere (#56). + The config parser is more robust and prints out better diagnostics on incorrect config files. + Ctrl+^ (FS#721) and Ctrl+J can now be bound. + Command history can be cleared with /window history -clear + /hilight -mask -line is now supported (FS#275). + CHANTYPES are now supported. + Improved reload speed of ignores. + Add -date feature to /lastlog + irssiproxy can be more easily enabled and disabled. + Expando for hostname (FS#829). + UNIX sockets can now also be specified in the config file. + Disable SSLv3 due to the POODLE vulnerability. + SSL ciphers can now be specified per server. + Added SNI support for SSL. - /ignore now respects -pattern on merge (#78). - irssiproxy (BNC) module now uses correct line endings. - Fix missing lines on large pastes (FS#905). - Correctly preserve STATUSMSG prefixes (#291). - Fix infinite recursion in key bindings (FS#817). - Fix incomplete awaylog caused by buffering. - Fix calculation of UTF-8 string length display in some cases. - Fix some Perl warnings related to @@ISA. - EXEC windowitems now get proper references on the Perl side. - Incremental help file improvements. - ANSI attributes are now properly reset. - Fixed regression where text would blink when terminal lacks color support. - Permit the usage of Freenode extban syntax in /ban (#150) - Fixed regression in scriptassist on unload of scripts. - Fixed regression in -actcolor %n @ text @d212 1 d215 1 @ 1.12 log @Update chat/irssi with PR pkg/49324 by Leonardo Taccari from 0.8.16 to 0.8.17 (and also update accordingly chat/irssi-*/distinfo). Changes: v0.8.17 2014-10-11 The Irssi team + Document that SSL connections aren't properly handled during /UPGRADE. See Github PR #39. + Synchronize scripts with scripts.irssi.org. + Performance enhancement of the nicklist as well as the window_item_find function. See Github PR #24. + Disallow unloading of static modules. + Allow UTF-8 characters in /bind. See Github PR #18. + Split overlong outgoing messages instead of silently truncating them. Adds two new options: 'split_line_end' and 'split_line_start'. 'split_line_end' contains a string added to the end of line fragments. 'split_line_start' contains a string added to the beginning of line fragments. See Github PR #29. + Added special /ignore NO_ACT level to ignore only activity (see /help ignore). + Support for 256 and true color terminals (see Github PR #48). + Support for italics (see Github PR #58). + Rewrote many help files. - Fixed various compiler warnings and use of deprecated functions. - Fixed Perl API usage and added PERL_NO_GET_CONTEXT to reduce code size. - Fixed format_get_text Perl API. See Github PR #23. - Fixed gui_printtext_after and term_refresh_*() visibility. See Github PR #22. - Fixed issue where UTF-8 characters was corrupted once for every 32k text. See Github PR #12. - Fixed redrawing issue with right-aligned statusbar. - Fixed use-after-free bug with cached settings values. See Github PR #147. @ text @d75 1 d85 1 d99 1 d163 1 a253 1 share/irssi/scripts/sb_search.pl a254 1 share/irssi/scripts/splitlong.pl @ 1.12.12.1 log @Pullup ticket #5104 - requested by sevan chat/irssi: security fix, bugfixes chat/irssi-icb: security fix, bugfixes chat/irssi-xmpp: security fix, bugfixes Revisions pulled up: - chat/irssi-icb/Makefile 1.39 - chat/irssi-icb/distinfo 1.23-1.24 - chat/irssi-icb/patches/patch-src_core_icb-core.c 1.1 - chat/irssi-icb/patches/patch-src_fe-common_fe-icb.c 1.1 - chat/irssi-xmpp/Makefile 1.6-1.7,1.9-1.10 - chat/irssi-xmpp/PLIST 1.2 - chat/irssi-xmpp/distinfo 1.5-1.6 - chat/irssi/Makefile 1.72-1.73 - chat/irssi/Makefile.common 1.17-1.18 - chat/irssi/PLIST 1.13-1.14 - chat/irssi/distinfo 1.35-1.37 - chat/irssi/options.mk 1.12 - chat/irssi/patches/patch-scripts_buf.pl 1.1 --- Module Name: pkgsrc Committed By: maya Date: Sun Aug 14 21:10:35 UTC 2016 Modified Files: pkgsrc/chat/irssi: Makefile Makefile.common PLIST distinfo options.mk Log Message: Update irssi to 0.8.19 Changes: v0.8.19 2016-03-23 The Irssi team - Fixed regression when joining and parting channels on IRCnet (#435) - Fixed SASL EXTERNAL (#432) - Fixed regression when not using SASL (#438) - Fixed incorrect SSL disconnects when using SSL from modules/scripts (#439) - Fixed regression where proxy_string could not be configured or certain file transfers could not be accepted (#445) - Fixed storing layout of !channels (#183) - Fixed restoration of bracketed paste mode on quit (#449) - Make the usage of meta-O for cursor keys configurable with /set term_appkey_mode off v0.8.18 2016-02-13 The Irssi team * Modules will now require to define a void MODULENAME ## _abicheck(int *version) method to ensure that they are compiled against the correct Irssi version. * The signature of "message private" has been changed to 5: server, message, nick, address, target in order to support "self messages". Module authors should implement this change if they are using this signal. * Removing networks will now remove all attached servers and channels (#45). * The proxy module now has an /irssiproxy command. * sb_search has been moved to scripts.irssi.org * WIN32 has been completely removed (it had not been working and is lacking a maintainer.) * Garbage Collection support has been removed. This will hardly have any effect for anyone given that it has been unsupported for several years. + CAP SASL PLAIN login is now supported natively. + Paste bracket markers can be requested from terminal with /set paste_use_bracketed_mode on + "Self messages" generated by some bouncers can now be received in the proper window. + Try to split long lines on spaces to avoid words being splitted. Adds a new option: 'split_line_on_space' which defaults to on. + Add setting hilight_nick_matches_everywhere (#56). + The config parser is more robust and prints out better diagnostics on incorrect config files. + Ctrl+^ (FS#721) and Ctrl+J can now be bound. + Command history can be cleared with /window history -clear + /hilight -mask -line is now supported (FS#275). + CHANTYPES are now supported. + Improved reload speed of ignores. + Add -date feature to /lastlog + irssiproxy can be more easily enabled and disabled. + Expando for hostname (FS#829). + UNIX sockets can now also be specified in the config file. + Disable SSLv3 due to the POODLE vulnerability. + SSL ciphers can now be specified per server. + Added SNI support for SSL. - /ignore now respects -pattern on merge (#78). - irssiproxy (BNC) module now uses correct line endings. - Fix missing lines on large pastes (FS#905). - Correctly preserve STATUSMSG prefixes (#291). - Fix infinite recursion in key bindings (FS#817). - Fix incomplete awaylog caused by buffering. - Fix calculation of UTF-8 string length display in some cases. - Fix some Perl warnings related to @@ISA. - EXEC windowitems now get proper references on the Perl side. - Incremental help file improvements. - ANSI attributes are now properly reset. - Fixed regression where text would blink when terminal lacks color support. - Permit the usage of Freenode extban syntax in /ban (#150) - Fixed regression in scriptassist on unload of scripts. - Fixed regression in -actcolor %n --- Module Name: pkgsrc Committed By: leot Date: Sun Aug 14 21:15:12 UTC 2016 Modified Files: pkgsrc/chat/irssi-icb: Makefile distinfo Added Files: pkgsrc/chat/irssi-icb/patches: patch-src_core_icb-core.c patch-src_fe-common_fe-icb.c Log Message: Add support for irssi>=0.8.18 and update distinfo for irssi-0.8.19 update --- Module Name: pkgsrc Committed By: leot Date: Sun Aug 14 21:16:04 UTC 2016 Modified Files: pkgsrc/chat/irssi-xmpp: Makefile PLIST distinfo Log Message: Update chat/irssi-xmpp to 0.53 pkgsrc changes: - Drop MAINTAINERship - Update distinfo for irssi-0.8.19 Changes: 0.53 - 18/03/2016 - Irssi 0.8.18 support - Bug fixes and stability improvements --- Module Name: pkgsrc Committed By: jperkin Date: Mon Sep 19 17:17:27 UTC 2016 Modified Files: pkgsrc/chat/irssi-xmpp: Makefile Log Message: Use correct linker flags on Darwin. --- Module Name: pkgsrc Committed By: maya Date: Wed Sep 21 20:53:57 UTC 2016 Modified Files: pkgsrc/chat/irssi: Makefile.common PLIST distinfo pkgsrc/chat/irssi-icb: distinfo pkgsrc/chat/irssi-xmpp: Makefile distinfo Log Message: irssi: update to 0.8.20, security fix. catch up with irssi-icb, irssi-xmpp distinfo (they grab irssi versioned file). comment out part of irssi-xmpp makefile which is breaking the build. irssi 0.8.20 changes: - Correct the name of an emitted sasl signal (#484) - Correct the prototype for the 'message private' signal (#515) - Corrections in away and hilight help text (#477, #518) - /squery and /servlist commands have been restored. - Where Irssi would previously only report "System error" on connect, it will now try harder to retrieve the system error message. - Fixed issue with +channels not working properly (#533) - Fixed crash in optchan when item has no server (#485) - Fixed random remote crash in the nicklist handling (#529) - Fixed remote crash due to incorrect bounds checking on formats, reported by Gabriel Campana and Adrien Guinet from Quarkslab. --- Module Name: pkgsrc Committed By: jperkin Date: Wed Sep 21 20:58:15 UTC 2016 Modified Files: pkgsrc/chat/irssi-xmpp: Makefile Log Message: Fix Darwin subst. --- Module Name: pkgsrc Committed By: maya Date: Thu Sep 22 09:07:08 UTC 2016 Modified Files: pkgsrc/chat/irssi: Makefile distinfo Added Files: pkgsrc/chat/irssi/patches: patch-scripts_buf.pl Log Message: irssi: add patch for buf.pl update as it is shipped with irssi. previously it would create a world readable file containing chat logs when /upgrade was used. while a security fix, you have to jump through many hoops to be affected by it - we don't enable perl scripts by default, we don't run that perl script by default, and you'd have to know that /upgrade exists in the first place, and run on a system where world readability of files is a concern. still, grab upstream update, bump PKGREVISION. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.12 2015/01/06 12:40:06 mef Exp $ a74 1 include/irssi/src/fe-common/irc/fe-irc-channels.h a83 1 include/irssi/src/irc/core/irc-cap.h a96 1 include/irssi/src/irc/core/sasl.h a159 1 share/irssi/help/irssiproxy a207 1 share/irssi/help/servlist a209 1 share/irssi/help/squery d250 1 d252 1 @ 1.11 log @Update irssi to 0.8.13 (and bump pkgrevision irssi-icb). Also contains security fix for CVE-2009-1959 (patch-ab). Based on patch provided by Leonardo Taccari in PR 41785. ChangeLog for 0.8.13 Features: * Reject some obviously invalid values in /set. * Add perl bindings for Window::get_history_lines * Use an io channel to write the config file. * Use memory slices instead of memory chunks for text buffer. * Remove methods to create/destroy TextBuffer and TextBufferView and low level api to add/remove lines, scripts should be fine using Window::print_after and TextBufferView::remove_line. * Add print_after method to Window perl object analogous to gui_printtext_after but which also expands formats and forces a full line. * Better mapping of signal parameters to Perl. All signals used in scripts now need to be registered with Irssi::signal_register. * Add public header with interfaces to manage statusbar items (bug #535) * Recode: assume utf-8 encoding for an ascii string in which no escape character occurs (bug #392). * Allow /BAN, /UNBAN, /KICBAN, /KNOCKOUT if channel is not synced. Requesting ban lists from an unsynced channel will ask them from the server, banning a user whose u@@h irssi does not know will ban nick!*@@* and only bans irssi knows about can be removed. * Allow storing multiple "other" prefixes such as +q and +a (original patch by JasonX) * Add /set autolog_ignore_targets for cherry-picking targets that shouldn't get logged. * Add support for 16 colors. Formats KBGCRMYW and mirc colors are now mapped to colors 8-15. fe-text translates colors 8-15 to bold/blink+0-7 if the terminal supports only 8 colors. If your theme uses one of the high color formats and you really want bold you can change %FMT to %fmt%_%_, it will work fine in all irssi versions. * Better 005 PREFIX support (bug #580). * Display 407 numerics other than "duplicate channel". * Fix display of ratbox-style operspy whois. * Recode outgoing irc away messages (bug #412). * Recode outgoing irc quit messages. * Remove scrollback_levelclear_levels setting and add a 'level' option to 'sb levelclear' to specify a comma separated list of levels. * Add perl __WARN__ handler for scripts (bug #427). * Add Irssi::command_parse_options function to parse options for a command. * Revert recode changes introduced in 0.8.12. * Add completion for /WINDOW SERVER. * Support for reading kicks/msgs from TARGMAX/MAXTARGETS 005 tokens. * Enhancements to the redirections code. * Support for RPL_WHOISACTUALLY (338 numeric) for both ratbox and ircu (bug #428). * -idle option of /notify is gone. * /layout save now makes window-channel bindings instantly effective (bug #35). * /ping without arguments does not send anymore a ctcp ping to a channel (bug #542). * Track IRC operator status of nicks a bit better. * new 'actlist_names' option to add active items names in 'act' statusbar item. * new 'word_completion_backward' command to scroll backwards in the completion list. * add 'list' option to /bind to print all the available commands. * show setter/time in +I lists * apply -usermode before -autosendcmd (bug #548). * reduce memory usage of the scrollback buffer and make the display in /sb status more accurate (higher). * fix data getting dropped when a lot is sent at a time (e.g. when attaching to irssi-proxy, bug #528). * introduce the type Irssi::Irc::Client and signals to communicate with proxy clients to allow for scripting parts of the irssi-proxy. * Add sb_search.pl, a script for /SCROLLBACK SEARCH Bugfixes: * Fix /NOTIFY list when nick is seen joining (bug #642). * Include hostmask in 001 event sent by proxy (bug #650). * Be more power-friendly: don't run any always-on <1s timers (bug #641). * Don't get confused by a failed /JOIN -window (bug #644). * Properly initialize embedded Perl (PERL_SYS_INIT3). * Replace invalid utf-8 bytes with U+FFFD when drawing a line. * Properly unload the original script when using /script load to reload it. (bug #525, patch by Lukas Mai) * Clean up script loading in general: * Don't leak local variables to eval'd code. * Set filename/line number to get better error messages from perl. * Use three-arg open and lexical filehandles to avoid surprises. * Include error reason in message for unopenable scripts. * Don't wrap script code in sub handler { } - this avoids spurious warnings and should at least allow __END__ to work properly. (Patch by Lukas Mai) * Fix NETSPLIT_SERVER_REC in signals for Perl. * Remove buggy /SCROLLBACK redraw and /SET scrollback_save_formats. * Always preserve the active mainwindow when resizing. * Ignore DNS not found errors when considering reconnect. * Do not strip the comma in a mirc color if it is not followed by a digit (bug #250). * Fix building perl module with perl-5.10 (bug #630). * fix leak with $L expando. * fix possible crash with /script reset. * ignore exceptions take precedence over ignores in all cases. * honour -channels preference for ignore -replies (bug #227). * Fix mode display in whois with unreal (379 numeric) (bug #479). * Fix regressions that prevented external modules from building/working (bugs #537 #539). * Fix /set hilight_level not taking effect immediately (bug #598). * Fix bold, blinking and indentation in /LASTLOG and buf.pl. @ text @a159 2 share/irssi/help/invitelist share/irssi/help/ircnet a185 1 share/irssi/help/note a202 1 share/irssi/help/rping a203 1 share/irssi/help/say a207 1 share/irssi/help/servlist a209 1 share/irssi/help/squery d226 1 a226 1 share/irssi/help/uping a233 1 share/irssi/help/watch a237 2 share/irssi/help/wjoin share/irssi/help/wquery @ 1.10 log @Remove @@dirrm entries from PLISTs @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.9 2007/10/13 16:27:14 adrianp Exp $ d3 1 a3 1 include/irssi/config.h a50 1 include/irssi/src/fe-common/core/autorun.h a68 1 include/irssi/src/fe-common/core/translation.h d80 1 a114 3 include/irssi/src/lib-popt/findme.h include/irssi/src/lib-popt/popt.h include/irssi/src/lib-popt/poptint.h a116 1 share/doc/irssi/botnet.txt a126 1 share/irssi/config.h a142 1 share/irssi/help/date a152 1 share/irssi/help/flushbuffers a239 1 share/irssi/help/wallchops d260 1 @ 1.9 log @Update to 0.8.12 * Add a set of patches to re-introduce irssi-config which was removed in this release. We need this file for chat/irssi-icb to work. An upstream bug has been opened about this. http://bugs.irssi.org/?do=details&task_id=537&histring=icb From the CHANGELOG: Rewrite SSL connection/handshake code. Remove support for glib 1.x. Do not send our hostname to the server (bug #488). Improve completion for /SET. Various improvements to the help files. Make alt/meta+arrow keys work in recent versions of xterm (bug #496) Fix DCC get when file size is 0 (bug #494). Fix logging lines with no target to all logs, broken in 0.8.11. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.8 2006/01/17 21:45:52 veego Exp $ a273 23 @@dirrm share/irssi/themes @@dirrm share/irssi/scripts @@dirrm share/irssi/help @@dirrm share/irssi @@dirrm share/examples/irssi @@dirrm share/doc/irssi @@dirrm lib/irssi/modules @@dirrm lib/irssi @@dirrm include/irssi/src/lib-popt @@dirrm include/irssi/src/lib-config @@dirrm include/irssi/src/irc/notifylist @@dirrm include/irssi/src/irc/flood @@dirrm include/irssi/src/irc/dcc @@dirrm include/irssi/src/irc/core @@dirrm include/irssi/src/irc @@dirrm include/irssi/src/fe-common/irc/notifylist @@dirrm include/irssi/src/fe-common/irc/dcc @@dirrm include/irssi/src/fe-common/irc @@dirrm include/irssi/src/fe-common/core @@dirrm include/irssi/src/fe-common @@dirrm include/irssi/src/core @@dirrm include/irssi/src @@dirrm include/irssi @ 1.8 log @Update to version 0.8.10, based on PR #32432 from Juha-Matti Tilli: - Recode support - Isupport (005 numeric) - Passive DCC support. - Many memleak fixes. - Network specific ignoring. - Updated internal error handling. - Complete 64bit support. - Revised default aliases. - Updated paste detection and settings. - Tons of bugfixes. - Other changes The 'pre-install' hack from the pr is no longer needed after a fix from jlam. Don't delete the patch-ae, which was removed in the pr. Recode support won't work at the moment on NetBSD. Bump the version for irssi-icb, due too the upgrade of irssi. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.7 2005/03/19 15:32:25 jmmv Exp $ a70 1 include/irssi/src/fe-common/core/utf8.h d133 1 @ 1.7 log @Enable build of the proxy module, as requested in PR pkg/25517. Note that the report asked for a conditional build through a knob, but I can't see a reason to not enable it by default (so it's now unconditionally built). Bump PKGREVISION to 3 due to this. While here, force removal of the modules directory instead of only removing it when empty. Any package installing modules must depend on irssi to handle this shared directory. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.6 2003/12/04 10:43:10 veego Exp $ d3 117 d159 1 d194 1 d207 1 d282 15 @ 1.6 log @Update to 0.8.8. Fix based on pkg/23560, but not all parts were be used and others were added where needed. Main NetBSD changes: - switched from glib1 to glib2. - added IRSSI_USE_SSL, defaulting to YES, for ssl server support - make it possible to disable IPv6 v0.8.8 2003-11-23 Timo Sirainen - Just a few fixes to converting old settings automatically v0.8.7 2003-11-23 Timo Sirainen * Settings changes - we have now "time", "size" and "level" setting types. - Level settings should work the same as before. - Time settings can have units: days, hours, mins, secs, milliseconds (or msecs). The units can be combined and written in shorter form as well, for example "5d 30m 10ms" - Size settings can have units: gbytes, mbytes, kbytes, bytes. They can be written in shorter form as well, eg. "gb" or "g". Your existing settings should be converted automatically. + Pasting detection. All keys except CR and LF are pasted as-is into prompt in pasting mode. /SET paste_detect_time controls how closely each others characters must occur for it to be considered pasting. Paste mode goes on when first pasted CR/LF is found. The first line may also contain some command characters. They are executed, but their action in entry line is reverted once pasting is detected. What this means in practise is that even if you have TABs (assuming TAB is completion key) in the first pasted line, they get pasted as TABs. This detection isn't perfect, so if it annoys you it can be disabled with /SET paste_detect_time 0 + If pasting more lines than /SET paste_verify_line_count, irssi asks if you actually want to do that. This should be useful to prevent accidental copy&paste mistakes. Setting it to 0 disables this entirely. + Support for sending SSL certificate to server and optionally verify server's certificate. See the -ssl_* options for /SERVER and /SERVER ADD. Patch by Joel Eriksson. + DCC SERVER support by Mark Trumbull + Support for DCC sending larger files than 2GB if supported by operating system (ie. 64bit file support). Receiving has always been possible, but the statistics were wrong with >4GB files if 64bit support isn't enabled. + Better displaying of DCC file transfer statistics. - Several other minor fixes and enhancements, see ChangeLog @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.5 2002/12/02 12:19:19 jmmv Exp $ d3 1 d160 2 a161 2 @@unexec ${RMDIR} %D/lib/irssi/modules 2>/dev/null || ${TRUE} @@unexec ${RMDIR} %D/lib/irssi 2>/dev/null || ${TRUE} @ 1.5 log @Update Irssi to 0.8.6. Taken from the NEWS: * Tons of changes, here's only the largest that come to my mind now: + SSL support by vjt at users.sf.net + DCC send queues by Heikki Orsila + Better support for !channels The new Makefile.common will be used by Irssi plugins. Approved by wiz. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.4 2002/11/21 13:00:02 grant Exp $ d15 1 d41 1 d56 1 a135 1 share/irssi/config.h @ 1.5.4.1 log @Pullup a security fix to the pkgsrc-2003Q4 branch, requested by Bernd Ernesti. Module Name: pkgsrc Committed By: veego Date: Thu Dec 4 10:43:10 UTC 2003 Modified Files: pkgsrc/chat/irssi: Makefile Makefile.common PLIST distinfo Removed Files: pkgsrc/chat/irssi/patches: patch-ac patch-ad patch-ae Log Message: Update to 0.8.8. Fix based on pkg/23560, but not all parts were be used and others were added where needed. Main NetBSD changes: - switched from glib1 to glib2. - added IRSSI_USE_SSL, defaulting to YES, for ssl server support - make it possible to disable IPv6 v0.8.8 2003-11-23 Timo Sirainen - Just a few fixes to converting old settings automatically v0.8.7 2003-11-23 Timo Sirainen * Settings changes - we have now "time", "size" and "level" setting types. - Level settings should work the same as before. - Time settings can have units: days, hours, mins, secs, milliseconds (or msecs). The units can be combined and written in shorter form as well, for example "5d 30m 10ms" - Size settings can have units: gbytes, mbytes, kbytes, bytes. They can be written in shorter form as well, eg. "gb" or "g". Your existing settings should be converted automatically. + Pasting detection. All keys except CR and LF are pasted as-is into prompt in pasting mode. /SET paste_detect_time controls how closely each others characters must occur for it to be considered pasting. Paste mode goes on when first pasted CR/LF is found. The first line may also contain some command characters. They are executed, but their action in entry line is reverted once pasting is detected. What this means in practise is that even if you have TABs (assuming TAB is completion key) in the first pasted line, they get pasted as TABs. This detection isn't perfect, so if it annoys you it can be disabled with /SET paste_detect_time 0 + If pasting more lines than /SET paste_verify_line_count, irssi asks if you actually want to do that. This should be useful to prevent accidental copy&paste mistakes. Setting it to 0 disables this entirely. + Support for sending SSL certificate to server and optionally verify server's certificate. See the -ssl_* options for /SERVER and /SERVER ADD. Patch by Joel Eriksson. + DCC SERVER support by Mark Trumbull + Support for DCC sending larger files than 2GB if supported by operating system (ie. 64bit file support). Receiving has always been possible, but the statistics were wrong with >4GB files if 64bit support isn't enabled. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.6 2003/12/04 10:43:10 veego Exp $ a14 1 share/irssi/config.h a39 1 share/irssi/help/flushbuffers a53 1 share/irssi/help/knock d133 1 @ 1.4 log @- honour PKG_SYSCONFDIR - convert to bsd.pkg.install.mk example config installation - bump PKGREVISION from Julio Merino in PR pkg/18982. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.3 2002/03/20 00:39:19 hubertf Exp $ d3 1 a13 1 share/doc/irssi/startup-HOWTO.txt d26 1 d94 1 d133 2 d146 1 d157 2 @ 1.3 log @Update irssi to 0.8.4. Patch sent in by Otto Hilska in private mail. Changes: v0.8.4 2002-03-13 Timo Sirainen * Continuing to fix my stupid mistakes... - When a queried nick did a nick change, it might have crashed irssi - read ChangeLog for some other minor changes v0.8.3 2002-03-13 Timo Sirainen - Perl scripts handling channel parts/kicks/quits printed some errors. - Connecting to IPv6 servers without IPv4 record didn't work - When queries were auto-created by you using /MSG and you had /SET autoclose_query non-zero, the query was always destroyed almost immediately. - Fix to some stupid ircds not sending us 001 numeric, but beginning from MOTD v0.8.2 2002-03-11 Timo Sirainen * Changed the list of scripts distributed with irssi. Separated example scripts to scripts/examples/ directory. * Hated infobar was removed, the same info is now in topicbar in empty windows. I don't think it would disturb anyone in there. If you still preferred always-empty topicbars, use /SBAR topic REMOVE topic_empty + Added info_eol field to theme. If true, timestamp and server tag are added to end of line, not at beginning. + If -4 or -6 option is used with /SERVER, irssi now forces the connection using the given protocol or fails. + /SET max_wildcard_modes (default 6) - if a wildcard to /OP, /DEOP, /VOICE or /DEVOICE matches more nicks than this, -yes option is required. This is trying to prevent accidental massops. Setting it to 0 disables this check. + Supports now correctly servers which use '.' char as channel owner character in /NAMES list. Also supports multiple mode chars, eg. @@+nick (if some server actually used it). + Never ignore kick message if you get kicked from channel. + Sending irssi SIGHUP now does a /RELOAD - useful if you accidentally messed up something which doesn't let you do the /RELOAD inside irssi (eg. /SBAR prompt DISABLE). + irssi-proxy: PROXY CTCP ON|OFF - proxy clients can send this command to specify that they want to handle the received CTCP requests. Useful for specifying who gets to handle DCCs. + Added escape_char /BIND command. The next char after that would be added as-is to input line. - Writing lines longers than 1024 chars to input buffer crashed irssi (stupid missing sizeof() bug :) - Some UTF-8 fixes - Better flood protection for lines with >100 chars - Control characters aren't printed as-is in topicbar (or statusbars in general) anymore - /OPER can be now aborted by giving empty password - Netjoin messages were buggy in +channels - Part message parameter for /CYCLE was never used. - Don't send -autosendcmd after /UPGRADE. - /SET autoclose_query - now only last received private message affects when the query is closed, ie. /WHOIS requests or nick changes don't reset the counter. - Foreground ANSI colors weren't working - Deleting one character replaced cutbuffer with that character. Also ^Y leaked memory. - /SCRIPT LOAD looked scripts from prefix/lib dir, not prefix/share where they were actually installed. - Highascii chars in replaces block in theme files could have crashed irssi. @ text @d1 1 a1 1 @@comment $NetBSD$ a2 1 etc/irssi.conf d14 1 d150 1 @ 1.2 log @Update irssi to 0.8.1. Patch submitted by Otto Hilska in private mail. Changes: v0.8.1 2002-02-17 Timo Sirainen * Expected bugfix release :) Worst thing was that I forgot always to debug why /cat /dev/urandom crashed irssi. Well, found two ways that could make it happen. - Irssi was linked with -lcurses AND -lncurses - Logging could have produced GLib errors with certain conditions - A few compiler warnings fixes v0.8.0 2002-02-17 Timo Sirainen * I really should make releases more often. Once in every two weeks used to be nice. Maybe once in a month would be good now. There was many reasons why this release took this long .. first being addicted to books, then life stuff, then it took forever to figure out that irssi was crashing under solaris (and not because of one of the big changes I made while moving to IRC from solaris box). And now.. well, after this release I'll start working more with the yet another irssi rewrite :) The code is getting too ugly again, and some things need rewriting to support some new features more easily. It will take a while to get it all done, so I'll try to keep updating this "stable" irssi as well. There's too many changes since 0.7.98.3 (and .4 which was just minor bugfix), about 6600 lines in ChangeLog. I'm not going to read all that, so I'll just list the biggest changes that I can remember now. This version was supposed to be called 0.7.99, but since there were so many changes, and I originally though of putting 0.8.0 out long time ago, and 0.7.100 would look stupid, I guess it's time for 0.8.0 :) + /UPGRADE - upgrade irssi to new version on-the-fly without disconnecting from server, so other people won't even notice you quit from IRC. This ONLY executes the new binary, it does NOT download/compile/whatever irssi. + UTF-8 support with /SET term_type UTF-8, default is "8bit". It's also automatically detected from system locale (if supported). + Fully configurable statusbar. Yes. FULLY. Don't bother asking if something could be done with it, it can, just ask how. Well, there's a few things I didn't have time/energy to finish: window-specific statusbar groups and support for multiple input lines in screen. + Rewritten keyboard handling. No more the CTRL-X and ALT-x handling, now you can create whatever keyboard combinations your terminal can send to irssi. + Rewritten text buffer (scrollback) handling. + Irssi doesn't depend on curses anymore, so it can be installed anywhere a working terminfo/termcap exists. This also allows us to use all the possible colors terminal has (curses limits to 64), so eg. %0 is now always black background, not the default terminal background (%n). Several systems have also terminfo/termcap database that doesn't support colors, so I've added /SET term_force_colors option to force ANSI-style colors. Note that eg. BitchX does this by default. Getting rid of curses allows also one great thing for you people copy&pasting long urls :) If a long word gets split to two lines, doubleclicking the word selects it from both lines. + Rewritten server event redirections. Before it was pretty easy to mess up irssi's expectations of what server sends, and some things might have stayd in the buffer forever. Especially notify lists messed up /WHOIS requests for the notified people. Now all this should be history and it's a lot easier for scripts to use the redirections as well. + New ICB chat protocol plugin - very basic and doesn't support nicklist, but works. :) + --home and --config parameters to specify alternate ~/.irssi directory or config file. + Scripts can be unloaded separately with /SCRIPT UNLOAD. You can get a list of runnning scripts with /SCRIPT. + /SERVER PURGE [] - purge the output buffer (for given target). Useful for example if you accidentally paste 100 lines :) The buffer is automatically purged if you get kicked from channel, or if you /PART the channel and there's more than 10 lines in output buffer. @ text @d6 1 a77 1 share/irssi/help/perlflush a89 1 share/irssi/help/run d133 7 a139 3 share/irssi/scripts/clones.pl share/irssi/scripts/hello.pl share/irssi/scripts/privmsg.pl d141 3 a143 1 share/irssi/scripts/realname.pl @ 1.1 log @Move pkg/ files into package's toplevel directory @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.1.1.1 2001/09/16 16:14:09 hubertf Exp $ d3 1 a3 28 etc/irssi/colorless.theme etc/irssi/config etc/irssi/default.theme lib/irssi/modules/libfe_irc_dcc.a lib/irssi/modules/libfe_irc_dcc.la lib/irssi/modules/libfe_irc_dcc.so lib/irssi/modules/libfe_irc_dcc.so.0 lib/irssi/modules/libfe_irc_dcc.so.0.0 lib/irssi/modules/libfe_irc_notifylist.a lib/irssi/modules/libfe_irc_notifylist.la lib/irssi/modules/libfe_irc_notifylist.so lib/irssi/modules/libfe_irc_notifylist.so.0 lib/irssi/modules/libfe_irc_notifylist.so.0.0 lib/irssi/modules/libirc_dcc.a lib/irssi/modules/libirc_dcc.la lib/irssi/modules/libirc_dcc.so lib/irssi/modules/libirc_dcc.so.0 lib/irssi/modules/libirc_dcc.so.0.0 lib/irssi/modules/libirc_flood.a lib/irssi/modules/libirc_flood.la lib/irssi/modules/libirc_flood.so lib/irssi/modules/libirc_flood.so.0 lib/irssi/modules/libirc_flood.so.0.0 lib/irssi/modules/libirc_notifylist.a lib/irssi/modules/libirc_notifylist.la lib/irssi/modules/libirc_notifylist.so lib/irssi/modules/libirc_notifylist.so.0 lib/irssi/modules/libirc_notifylist.so.0.0 d6 1 d92 1 d102 1 d115 1 d125 1 d132 11 a142 5 share/locale/de/LC_MESSAGES/irssi.mo share/locale/fr/LC_MESSAGES/irssi.mo share/locale/pl/LC_MESSAGES/irssi.mo share/locale/pt_BR/LC_MESSAGES/irssi.mo share/locale/sv/LC_MESSAGES/irssi.mo a145 3 @@dirrm lib/irssi/modules @@dirrm lib/irssi @@dirrm etc/irssi @