head 1.13; access; symbols pkgsrc-2024Q4:1.12.0.66 pkgsrc-2024Q4-base:1.12 pkgsrc-2024Q3:1.12.0.64 pkgsrc-2024Q3-base:1.12 pkgsrc-2024Q2:1.12.0.62 pkgsrc-2024Q2-base:1.12 pkgsrc-2024Q1:1.12.0.60 pkgsrc-2024Q1-base:1.12 pkgsrc-2023Q4:1.12.0.58 pkgsrc-2023Q4-base:1.12 pkgsrc-2023Q3:1.12.0.56 pkgsrc-2023Q3-base:1.12 pkgsrc-2023Q2:1.12.0.54 pkgsrc-2023Q2-base:1.12 pkgsrc-2023Q1:1.12.0.52 pkgsrc-2023Q1-base:1.12 pkgsrc-2022Q4:1.12.0.50 pkgsrc-2022Q4-base:1.12 pkgsrc-2022Q3:1.12.0.48 pkgsrc-2022Q3-base:1.12 pkgsrc-2022Q2:1.12.0.46 pkgsrc-2022Q2-base:1.12 pkgsrc-2022Q1:1.12.0.44 pkgsrc-2022Q1-base:1.12 pkgsrc-2021Q4:1.12.0.42 pkgsrc-2021Q4-base:1.12 pkgsrc-2021Q3:1.12.0.40 pkgsrc-2021Q3-base:1.12 pkgsrc-2021Q2:1.12.0.38 pkgsrc-2021Q2-base:1.12 pkgsrc-2021Q1:1.12.0.36 pkgsrc-2021Q1-base:1.12 pkgsrc-2020Q4:1.12.0.34 pkgsrc-2020Q4-base:1.12 pkgsrc-2020Q3:1.12.0.32 pkgsrc-2020Q3-base:1.12 pkgsrc-2020Q2:1.12.0.28 pkgsrc-2020Q2-base:1.12 pkgsrc-2020Q1:1.12.0.8 pkgsrc-2020Q1-base:1.12 pkgsrc-2019Q4:1.12.0.30 pkgsrc-2019Q4-base:1.12 pkgsrc-2019Q3:1.12.0.26 pkgsrc-2019Q3-base:1.12 pkgsrc-2019Q2:1.12.0.24 pkgsrc-2019Q2-base:1.12 pkgsrc-2019Q1:1.12.0.22 pkgsrc-2019Q1-base:1.12 pkgsrc-2018Q4:1.12.0.20 pkgsrc-2018Q4-base:1.12 pkgsrc-2018Q3:1.12.0.18 pkgsrc-2018Q3-base:1.12 pkgsrc-2018Q2:1.12.0.16 pkgsrc-2018Q2-base:1.12 pkgsrc-2018Q1:1.12.0.14 pkgsrc-2018Q1-base:1.12 pkgsrc-2017Q4:1.12.0.12 pkgsrc-2017Q4-base:1.12 pkgsrc-2017Q3:1.12.0.10 pkgsrc-2017Q3-base:1.12 pkgsrc-2017Q2:1.12.0.6 pkgsrc-2017Q2-base:1.12 pkgsrc-2017Q1:1.12.0.4 pkgsrc-2017Q1-base:1.12 pkgsrc-2016Q4:1.12.0.2 pkgsrc-2016Q4-base:1.12 pkgsrc-2016Q3:1.11.0.4 pkgsrc-2016Q3-base:1.11 pkgsrc-2016Q2:1.11.0.2 pkgsrc-2016Q2-base:1.11 pkgsrc-2016Q1:1.10.0.4 pkgsrc-2016Q1-base:1.10 pkgsrc-2015Q4:1.10.0.2 pkgsrc-2015Q4-base:1.10 pkgsrc-2015Q3:1.9.0.2 pkgsrc-2015Q3-base:1.9 pkgsrc-2015Q2:1.7.0.46 pkgsrc-2015Q2-base:1.7 pkgsrc-2015Q1:1.7.0.44 pkgsrc-2015Q1-base:1.7 pkgsrc-2014Q4:1.7.0.42 pkgsrc-2014Q4-base:1.7 pkgsrc-2014Q3:1.7.0.40 pkgsrc-2014Q3-base:1.7 pkgsrc-2014Q2:1.7.0.38 pkgsrc-2014Q2-base:1.7 pkgsrc-2014Q1:1.7.0.36 pkgsrc-2014Q1-base:1.7 pkgsrc-2013Q4:1.7.0.34 pkgsrc-2013Q4-base:1.7 pkgsrc-2013Q3:1.7.0.32 pkgsrc-2013Q3-base:1.7 pkgsrc-2013Q2:1.7.0.30 pkgsrc-2013Q2-base:1.7 pkgsrc-2013Q1:1.7.0.28 pkgsrc-2013Q1-base:1.7 pkgsrc-2012Q4:1.7.0.26 pkgsrc-2012Q4-base:1.7 pkgsrc-2012Q3:1.7.0.24 pkgsrc-2012Q3-base:1.7 pkgsrc-2012Q2:1.7.0.22 pkgsrc-2012Q2-base:1.7 pkgsrc-2012Q1:1.7.0.20 pkgsrc-2012Q1-base:1.7 pkgsrc-2011Q4:1.7.0.18 pkgsrc-2011Q4-base:1.7 pkgsrc-2011Q3:1.7.0.16 pkgsrc-2011Q3-base:1.7 pkgsrc-2011Q2:1.7.0.14 pkgsrc-2011Q2-base:1.7 pkgsrc-2011Q1:1.7.0.12 pkgsrc-2011Q1-base:1.7 pkgsrc-2010Q4:1.7.0.10 pkgsrc-2010Q4-base:1.7 pkgsrc-2010Q3:1.7.0.8 pkgsrc-2010Q3-base:1.7 pkgsrc-2010Q2:1.7.0.6 pkgsrc-2010Q2-base:1.7 pkgsrc-2010Q1:1.7.0.4 pkgsrc-2010Q1-base:1.7 pkgsrc-2009Q4:1.7.0.2 pkgsrc-2009Q4-base:1.7 pkgsrc-2009Q3:1.6.0.4 pkgsrc-2009Q3-base:1.6 pkgsrc-2009Q2:1.6.0.2 pkgsrc-2009Q2-base:1.6 pkgsrc-2009Q1:1.5.0.36 pkgsrc-2009Q1-base:1.5 pkgsrc-2008Q4:1.5.0.34 pkgsrc-2008Q4-base:1.5 pkgsrc-2008Q3:1.5.0.32 pkgsrc-2008Q3-base:1.5 cube-native-xorg:1.5.0.30 cube-native-xorg-base:1.5 pkgsrc-2008Q2:1.5.0.28 pkgsrc-2008Q2-base:1.5 cwrapper:1.5.0.26 pkgsrc-2008Q1:1.5.0.24 pkgsrc-2008Q1-base:1.5 pkgsrc-2007Q4:1.5.0.22 pkgsrc-2007Q4-base:1.5 pkgsrc-2007Q3:1.5.0.20 pkgsrc-2007Q3-base:1.5 pkgsrc-2007Q2:1.5.0.18 pkgsrc-2007Q2-base:1.5 pkgsrc-2007Q1:1.5.0.16 pkgsrc-2007Q1-base:1.5 pkgsrc-2006Q4:1.5.0.14 pkgsrc-2006Q4-base:1.5 pkgsrc-2006Q3:1.5.0.12 pkgsrc-2006Q3-base:1.5 pkgsrc-2006Q2:1.5.0.10 pkgsrc-2006Q2-base:1.5 pkgsrc-2006Q1:1.5.0.8 pkgsrc-2006Q1-base:1.5 pkgsrc-2005Q4:1.5.0.6 pkgsrc-2005Q4-base:1.5 pkgsrc-2005Q3:1.5.0.4 pkgsrc-2005Q3-base:1.5 pkgsrc-2005Q2:1.5.0.2 pkgsrc-2005Q2-base:1.5 pkgsrc-2005Q1:1.4.0.10 pkgsrc-2005Q1-base:1.4 pkgsrc-2004Q4:1.4.0.8 pkgsrc-2004Q4-base:1.4 pkgsrc-2004Q3:1.4.0.6 pkgsrc-2004Q3-base:1.4 pkgsrc-2004Q2:1.4.0.4 pkgsrc-2004Q2-base:1.4 pkgsrc-2004Q1:1.4.0.2 pkgsrc-2004Q1-base:1.4 pkgsrc-2003Q4:1.3.0.4 pkgsrc-2003Q4-base:1.3 netbsd-1-6-1:1.3.0.2 netbsd-1-6-1-base:1.3 netbsd-1-6:1.2.0.8 netbsd-1-6-RELEASE-base:1.2 pkgviews:1.2.0.4 pkgviews-base:1.2 buildlink2:1.2.0.2 buildlink2-base:1.2 netbsd-1-5-PATCH003:1.2; locks; strict; comment @# @; 1.13 date 2025.01.31.15.36.14; author wiz; state dead; branches; next 1.12; commitid bofNm0LkD94DtEHF; 1.12 date 2016.12.17.03.19.18; author mef; state Exp; branches; next 1.11; commitid cOvwWMk49m01Mhyz; 1.11 date 2016.06.05.09.16.33; author mef; state Exp; branches; next 1.10; commitid Fv0M4ONLWlY51g9z; 1.10 date 2015.11.21.13.49.16; author mef; state Exp; branches; next 1.9; commitid m4T8O6XzG59pQXJy; 1.9 date 2015.09.02.01.55.13; author mef; state Exp; branches; next 1.8; commitid P4gydnRqvVDQtCzy; 1.8 date 2015.08.12.17.39.36; author tnn; state Exp; branches; next 1.7; commitid FqiHjOTtYkRWm0xy; 1.7 date 2010.01.06.08.33.23; author obache; state Exp; branches; next 1.6; 1.6 date 2009.06.14.17.35.53; author joerg; state Exp; branches; next 1.5; 1.5 date 2005.05.30.19.48.54; author bouyer; state Exp; branches; next 1.4; 1.4 date 2004.02.25.01.09.25; author xtraeme; state Exp; branches; next 1.3; 1.3 date 2002.09.13.21.35.18; author rh; state Exp; branches; next 1.2; 1.2 date 2002.02.15.10.12.30; author skrll; state Exp; branches; next 1.1; 1.1 date 2001.11.01.00.47.49; author zuntum; state Exp; branches; next ; desc @@ 1.13 log @eagle: remove This was a Linux binary of non-redistributable software. The download stopped working, and upstream discontinued the project (merging it into Autodesk Fusion). @ text @@@comment $NetBSD: PLIST,v 1.12 2016/12/17 03:19:18 mef Exp $ bin/eagle eagle/bin/autodesk-make.png eagle/bin/designlink.png eagle/bin/eagle eagle/bin/eagle-logo.png eagle/bin/eagle.def eagle/bin/eagle_de.htm eagle/bin/eagle_de.qm eagle/bin/eagle_en.htm eagle/bin/eagle_hu.qm eagle/bin/eagle_ru.qm eagle/bin/eagle_zh.qm eagle/bin/eagleicon16.png eagle/bin/eagleicon50.png eagle/bin/ecadio-logo.png eagle/bin/freeware.key eagle/bin/icons/Add.svg eagle/bin/icons/Annotation.svg eagle/bin/icons/Annotation_A.svg eagle/bin/icons/Annotation_S.svg eagle/bin/icons/Arc.svg eagle/bin/icons/ArcDirectionCCW.svg eagle/bin/icons/ArcDirectionCW.svg eagle/bin/icons/AttrOverwriteLbr.svg eagle/bin/icons/AttrOverwriteLbrEqual.svg eagle/bin/icons/AttrOverwritePart.svg eagle/bin/icons/AttrOverwritePartConst.svg eagle/bin/icons/Attribute.svg eagle/bin/icons/Auto.svg eagle/bin/icons/Back.svg eagle/bin/icons/Back_D.svg eagle/bin/icons/Brd.svg eagle/bin/icons/Bus.svg eagle/bin/icons/Cam.svg eagle/bin/icons/Change.svg eagle/bin/icons/Circle.svg eagle/bin/icons/ClearFind.svg eagle/bin/icons/Collapse.svg eagle/bin/icons/Connect.svg eagle/bin/icons/ConnectRouteAll.svg eagle/bin/icons/ConnectRouteAny.svg eagle/bin/icons/ConsistencyError.svg eagle/bin/icons/Copy.svg eagle/bin/icons/Cut.svg eagle/bin/icons/Delete.svg eagle/bin/icons/Dimension.svg eagle/bin/icons/DimensionAngle.svg eagle/bin/icons/DimensionDiameter.svg eagle/bin/icons/DimensionHorizontal.svg eagle/bin/icons/DimensionLeader.svg eagle/bin/icons/DimensionParallel.svg eagle/bin/icons/DimensionRadius.svg eagle/bin/icons/DimensionVertical.svg eagle/bin/icons/Display.svg eagle/bin/icons/Drc.svg eagle/bin/icons/Dru.svg eagle/bin/icons/Edit.svg eagle/bin/icons/Empty.svg eagle/bin/icons/Epf.svg eagle/bin/icons/Erc.svg eagle/bin/icons/Error.svg eagle/bin/icons/Errors.svg eagle/bin/icons/Expand.svg eagle/bin/icons/FileOpen.svg eagle/bin/icons/FileSave.svg eagle/bin/icons/FolderClosed.svg eagle/bin/icons/FolderOpen.svg eagle/bin/icons/Forward.svg eagle/bin/icons/Forward_D.svg eagle/bin/icons/Frame.svg eagle/bin/icons/FrameBorderBottom.svg eagle/bin/icons/FrameBorderLeft.svg eagle/bin/icons/FrameBorderRight.svg eagle/bin/icons/FrameBorderTop.svg eagle/bin/icons/Gateswap.svg eagle/bin/icons/Go.svg eagle/bin/icons/Go_D.svg eagle/bin/icons/Grid.svg eagle/bin/icons/Group.svg eagle/bin/icons/HasSupply.svg eagle/bin/icons/Help.svg eagle/bin/icons/HelpBookClosed.svg eagle/bin/icons/HelpBookOpen.svg eagle/bin/icons/HelpTopic.svg eagle/bin/icons/Hlp.svg eagle/bin/icons/Hole.svg eagle/bin/icons/Info.svg eagle/bin/icons/Invoke.svg eagle/bin/icons/Junction.svg eagle/bin/icons/Label.svg eagle/bin/icons/LabelXrefOff.svg eagle/bin/icons/LabelXrefOn.svg eagle/bin/icons/Lbr.svg eagle/bin/icons/LbrDevice.svg eagle/bin/icons/LbrOpen.svg eagle/bin/icons/LbrPackage.svg eagle/bin/icons/Lock.svg eagle/bin/icons/Mark.svg eagle/bin/icons/Meander.svg eagle/bin/icons/Mirror.svg eagle/bin/icons/Miter.svg eagle/bin/icons/MiterRound.svg eagle/bin/icons/MiterStraight.svg eagle/bin/icons/Modified.svg eagle/bin/icons/Modified_D.svg eagle/bin/icons/Module.svg eagle/bin/icons/Move.svg eagle/bin/icons/Name.svg eagle/bin/icons/Net.svg eagle/bin/icons/OK.svg eagle/bin/icons/OpenDev.svg eagle/bin/icons/OpenPac.svg eagle/bin/icons/OpenSym.svg eagle/bin/icons/Optimize.svg eagle/bin/icons/Orientation0.svg eagle/bin/icons/Orientation180.svg eagle/bin/icons/Orientation270.svg eagle/bin/icons/Orientation90.svg eagle/bin/icons/OrientationMirror.svg eagle/bin/icons/OrientationNormal.svg eagle/bin/icons/Package.svg eagle/bin/icons/Pad.svg eagle/bin/icons/Paste.svg eagle/bin/icons/Pin.svg eagle/bin/icons/PinFunctionClk.svg eagle/bin/icons/PinFunctionDot.svg eagle/bin/icons/PinFunctionDotClk.svg eagle/bin/icons/PinFunctionNone.svg eagle/bin/icons/PinLengthLong.svg eagle/bin/icons/PinLengthMiddle.svg eagle/bin/icons/PinLengthPoint.svg eagle/bin/icons/PinLengthShort.svg eagle/bin/icons/PinOrientation0.svg eagle/bin/icons/PinOrientation180.svg eagle/bin/icons/PinOrientation270.svg eagle/bin/icons/PinOrientation90.svg eagle/bin/icons/PinVisibleBoth.svg eagle/bin/icons/PinVisibleOff.svg eagle/bin/icons/PinVisiblePad.svg eagle/bin/icons/PinVisiblePin.svg eagle/bin/icons/Pinswap.svg eagle/bin/icons/Polygon.svg eagle/bin/icons/PolygonOrphansOff.svg eagle/bin/icons/PolygonOrphansOn.svg eagle/bin/icons/PolygonPourCutout.svg eagle/bin/icons/PolygonPourHatch.svg eagle/bin/icons/PolygonPourSolid.svg eagle/bin/icons/PolygonThermalsOff.svg eagle/bin/icons/PolygonThermalsOn.svg eagle/bin/icons/Port.svg eagle/bin/icons/Prefix.svg eagle/bin/icons/Print.svg eagle/bin/icons/ProjectClosed.svg eagle/bin/icons/ProjectOpen.svg eagle/bin/icons/Ratsnest.svg eagle/bin/icons/Rect.svg eagle/bin/icons/Redo.svg eagle/bin/icons/Redo_D.svg eagle/bin/icons/Replace.svg eagle/bin/icons/Ripup.svg eagle/bin/icons/Rotate.svg eagle/bin/icons/Route.svg eagle/bin/icons/Run.svg eagle/bin/icons/Sch.svg eagle/bin/icons/Scr.svg eagle/bin/icons/Script.svg eagle/bin/icons/ShapeLong.svg eagle/bin/icons/ShapeOctagon.svg eagle/bin/icons/ShapeOffset.svg eagle/bin/icons/ShapeRound.svg eagle/bin/icons/ShapeSquare.svg eagle/bin/icons/SheetNew.svg eagle/bin/icons/SheetNew_D.svg eagle/bin/icons/SheetRemove.svg eagle/bin/icons/SheetRemove_D.svg eagle/bin/icons/Show.svg eagle/bin/icons/Signal.svg eagle/bin/icons/Smash.svg eagle/bin/icons/Smd.svg eagle/bin/icons/Split.svg eagle/bin/icons/Stop.svg eagle/bin/icons/Stop_D.svg eagle/bin/icons/Text.svg eagle/bin/icons/TextSpin0.svg eagle/bin/icons/TextSpin1.svg eagle/bin/icons/Txt.svg eagle/bin/icons/Ulp.svg eagle/bin/icons/Undo.svg eagle/bin/icons/UndoDelimiter.svg eagle/bin/icons/Undo_D.svg eagle/bin/icons/Use.svg eagle/bin/icons/UsedOff.svg eagle/bin/icons/UsedOn.svg eagle/bin/icons/Value.svg eagle/bin/icons/Via.svg eagle/bin/icons/Warning.svg eagle/bin/icons/WillConnect.svg eagle/bin/icons/WindowBoard.svg eagle/bin/icons/WindowDevice.svg eagle/bin/icons/WindowPackage.svg eagle/bin/icons/WindowSchematic.svg eagle/bin/icons/WindowSymbol.svg eagle/bin/icons/Wire.svg eagle/bin/icons/WireBend0.svg eagle/bin/icons/WireBend1.svg eagle/bin/icons/WireBend2.svg eagle/bin/icons/WireBend3.svg eagle/bin/icons/WireBend4.svg eagle/bin/icons/WireBend5.svg eagle/bin/icons/WireBend6.svg eagle/bin/icons/WireBend7.svg eagle/bin/icons/WireBend8.svg eagle/bin/icons/WireBend9.svg eagle/bin/icons/WireCapFlat.svg eagle/bin/icons/WireCapRound.svg eagle/bin/icons/ZoomAll.svg eagle/bin/icons/ZoomIn.svg eagle/bin/icons/ZoomOut.svg eagle/bin/icons/ZoomRedraw.svg eagle/bin/icons/ZoomSelect.svg eagle/bin/idf-3d.png eagle/bin/pcb-service.png eagle/bin/platforms-lin.png eagle/bin/platforms-mac.png eagle/bin/platforms-win.png eagle/bin/qt_de.qm eagle/bin/qt_hu.qm eagle/bin/qt_ru.qm eagle/bin/qt_zh_CN.qm eagle/bin/qt_zh_TW.qm eagle/cam/DESCRIPTION eagle/cam/excellon.cam eagle/cam/gerb274x-4layer.cam eagle/cam/gerb274x-mill-drill.cam eagle/cam/gerb274x.cam eagle/cam/gerber.cam eagle/cam/glaser.whl eagle/cam/layout2.cam eagle/cam/schematic.cam eagle/doc/README_de eagle/doc/README_en eagle/doc/UPDATE_de eagle/doc/UPDATE_en eagle/doc/eagle.1 eagle/doc/eagle.dtd eagle/doc/elektro-tutorial.pdf eagle/doc/layer-setup_designrules.pdf eagle/doc/library_de.txt eagle/doc/library_en.txt eagle/doc/manual_de.pdf eagle/doc/manual_en.pdf eagle/doc/manual_zh.pdf eagle/doc/tutorial_de.pdf eagle/doc/tutorial_en.pdf eagle/doc/tutorial_zh.pdf eagle/doc/ulp/EagleIDFExporterInstructions.pdf eagle/doc/ulp/connect-device-split-symbol-de.pdf eagle/doc/ulp/connect-device-split-symbol-en.pdf eagle/doc/ulp/generate-3d-idf-data_de.pdf eagle/doc/ulp/generate-3d-idf-data_en.pdf eagle/doc/ulp/make-symbol-device-package-bsdl-2011-de.pdf eagle/doc/ulp/make-symbol-device-package-bsdl-2011-en.pdf eagle/dru/DESCRIPTION eagle/dru/Eurocircuits/EC-classification-ENGLISH-3-2013-V3-FINAL.pdf eagle/dru/Eurocircuits/Eurocircuits-EAGLE_dru_overview_130329.pdf eagle/dru/Eurocircuits/Eurocircuits-EAGLE_dru_settings_130329.pdf eagle/dru/Eurocircuits/eC_Advanced/eC_1Layer_PClass3_BaseCopperO105.dru eagle/dru/Eurocircuits/eC_Advanced/eC_1Layer_PClass4_BaseCopperO70.dru eagle/dru/Eurocircuits/eC_Advanced/eC_1Layer_PClass5_BaseCopperO35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_1Layer_PClass7_BaseCopperO35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass3_BaseCopperO105.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass4_BaseCopperO70.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass5_BaseCopperO18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass6_BaseCopperO35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass7_BaseCopperO18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass8_BaseCopperO12.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass8_BaseCopperO18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_2Layer_PClass9_BaseCopperO12.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass4_BaseCopperO35-I70.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass5_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass6_BaseCopperO35-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass7_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass8_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass8_BaseCopperO18-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass9_BaseCopperO12-I12.dru eagle/dru/Eurocircuits/eC_Advanced/eC_4Layer_PClass9_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass4_BaseCopperO35-I70.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass5_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass6_BaseCopperO35-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass7_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass8_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass8_BaseCopperO18-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass9_BaseCopperO12-I12.dru eagle/dru/Eurocircuits/eC_Advanced/eC_6Layer_PClass9_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass5_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass6_BaseCopperO35-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass7_BaseCopperO18-I35.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass8_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass8_BaseCopperO18-I18.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass9_BaseCopperO12-I12.dru eagle/dru/Eurocircuits/eC_Advanced/eC_8Layer_PClass9_BaseCopperO12-I18.dru eagle/dru/Eurocircuits/eC_Defaults/eC_1Layer_PClass6_BaseCopperO35_eCDefault.dru eagle/dru/Eurocircuits/eC_Defaults/eC_2Layer_PClass6_BaseCopperO18_eCDefault.dru eagle/dru/Eurocircuits/eC_Defaults/eC_4Layer_PClass6_BaseCopperO18-I35_eCDefault.dru eagle/dru/Eurocircuits/eC_Defaults/eC_6Layer_PClass6_BaseCopperO18-I35_eCDefault.dru eagle/dru/Eurocircuits/eC_Defaults/eC_8Layer_PClass6_BaseCopperO18-I35_eCDefault.dru eagle/dru/Multi-CB/Multi-CB_HDI/Multi-CB_2L_100um-Tracks_OL35um.dru eagle/dru/Multi-CB/Multi-CB_HDI/Multi-CB_4L_075um-Tracks_OL30um-IL12um.dru eagle/dru/Multi-CB/Multi-CB_HDI/Multi-CB_4L_100um-Tracks_OL35um-IL18um.dru eagle/dru/Multi-CB/Multi-CB_HDI/Multi-CB_6L_075um-Tracks_OL30um-IL12um.dru eagle/dru/Multi-CB/Multi-CB_Standard/Multi-CB_1L_125um-Tracks_OL35um.dru eagle/dru/Multi-CB/Multi-CB_Standard/Multi-CB_2L_125um-Tracks_OL35um.dru eagle/dru/Multi-CB/Multi-CB_Standard/Multi-CB_4L_125um-Tracks_OL35um-IL35um.dru eagle/dru/Multi-CB/Multi-CB_Standard/Multi-CB_6L_100um-Tracks_OL35um-IL35um.dru eagle/dru/Multi-CB/Multi-CB_Standard/Multi-CB_8L_100um-Tracks_OL35um-IL35um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_1L_200um-Tracks_OL70um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_1L_250um-Tracks_OL105um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_2L_200um-Tracks_OL70um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_2L_250um-Tracks_OL105um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_4L_200um-Tracks_OL70um-IL70um.dru eagle/dru/Multi-CB/Multi-CB_Thick-Cu/Multi-CB_4L_250um-Tracks_OL105um-IL35um.dru eagle/dru/WEdirekt/Eagle_WEdirekt_150_check.dru eagle/dru/default.dru eagle/lbr/19inch.lbr eagle/lbr/40xx.lbr eagle/lbr/41xx.lbr eagle/lbr/45xx.lbr eagle/lbr/74ac-logic.lbr eagle/lbr/74ttl-din.lbr eagle/lbr/74xx-eu.lbr eagle/lbr/74xx-little-de.lbr eagle/lbr/74xx-little-us.lbr eagle/lbr/74xx-us.lbr eagle/lbr/751xx.lbr eagle/lbr/ChangeLog eagle/lbr/DESCRIPTION eagle/lbr/IQD-Frequency-Products.lbr eagle/lbr/advanced-test-technologies.lbr eagle/lbr/agilent-technologies.lbr eagle/lbr/allegro.lbr eagle/lbr/altera-cyclone-II.lbr eagle/lbr/altera-cyclone-III.lbr eagle/lbr/altera-stratix-iv.lbr eagle/lbr/altera.lbr eagle/lbr/am29-memory.lbr eagle/lbr/amd-mach.lbr eagle/lbr/amd.lbr eagle/lbr/amis.lbr eagle/lbr/analog-devices.lbr eagle/lbr/aplus.lbr eagle/lbr/ase.lbr eagle/lbr/atmel.lbr eagle/lbr/austriamicrosystems.lbr eagle/lbr/avago.lbr eagle/lbr/axis.lbr eagle/lbr/battery.lbr eagle/lbr/belton-engineering.lbr eagle/lbr/burr-brown.lbr eagle/lbr/busbar.lbr eagle/lbr/buzzer.lbr eagle/lbr/c-trimm.lbr eagle/lbr/california-micro-devices.lbr eagle/lbr/capacitor-wima.lbr eagle/lbr/chipcard-siemens.lbr eagle/lbr/cirrus-logic.lbr eagle/lbr/con-3m.lbr eagle/lbr/con-4ucon.lbr eagle/lbr/con-amp-champ.lbr eagle/lbr/con-amp-micromatch.lbr eagle/lbr/con-amp-mt.lbr eagle/lbr/con-amp-mt6.lbr eagle/lbr/con-amp-quick.lbr eagle/lbr/con-amp-te.lbr eagle/lbr/con-amp.lbr eagle/lbr/con-amphenol.lbr eagle/lbr/con-avx.lbr eagle/lbr/con-berg.lbr eagle/lbr/con-bosch.lbr eagle/lbr/con-chipcard-iso7816.lbr eagle/lbr/con-coax.lbr eagle/lbr/con-commcon.lbr eagle/lbr/con-conrad.lbr eagle/lbr/con-cpci.lbr eagle/lbr/con-cui.lbr eagle/lbr/con-cypressindustries.lbr eagle/lbr/con-deutsch.lbr eagle/lbr/con-dil.lbr eagle/lbr/con-ebyelectro.lbr eagle/lbr/con-elco.lbr eagle/lbr/con-erni.lbr eagle/lbr/con-faston.lbr eagle/lbr/con-fci.lbr eagle/lbr/con-friwo.lbr eagle/lbr/con-garry.lbr eagle/lbr/con-harting-h.lbr eagle/lbr/con-harting-ml.lbr eagle/lbr/con-harting-v.lbr eagle/lbr/con-harting.lbr eagle/lbr/con-hirose.lbr eagle/lbr/con-hirschmann.lbr eagle/lbr/con-jack.lbr eagle/lbr/con-jae.lbr eagle/lbr/con-jst.lbr eagle/lbr/con-kycon.lbr eagle/lbr/con-kyocera-elco.lbr eagle/lbr/con-lemo.lbr eagle/lbr/con-leotronics.lbr eagle/lbr/con-lsta.lbr eagle/lbr/con-lstb.lbr eagle/lbr/con-lumberg.lbr eagle/lbr/con-ml.lbr eagle/lbr/con-molex.lbr eagle/lbr/con-neutrik_ag.lbr eagle/lbr/con-omron.lbr eagle/lbr/con-panasonic.lbr eagle/lbr/con-panduit.lbr eagle/lbr/con-pc.lbr eagle/lbr/con-pc104.lbr eagle/lbr/con-phoenix-254.lbr eagle/lbr/con-phoenix-3.81.lbr eagle/lbr/con-phoenix-350.lbr eagle/lbr/con-phoenix-500.lbr eagle/lbr/con-phoenix-508.lbr eagle/lbr/con-phoenix-762.lbr eagle/lbr/con-phoenix-me_max.lbr eagle/lbr/con-phoenix-mkds_5.lbr eagle/lbr/con-phoenix-smkdsp.lbr eagle/lbr/con-ptr500.lbr eagle/lbr/con-pulse.lbr eagle/lbr/con-rib.lbr eagle/lbr/con-samtec.lbr eagle/lbr/con-shallin.lbr eagle/lbr/con-shiua-chyuan.lbr eagle/lbr/con-stewart.lbr eagle/lbr/con-stocko.lbr eagle/lbr/con-subd.lbr eagle/lbr/con-sullinselectronics.lbr eagle/lbr/con-thomas-betts.lbr eagle/lbr/con-tyco.lbr eagle/lbr/con-tycoelectronics.lbr eagle/lbr/con-vg.lbr eagle/lbr/con-wago-500.lbr eagle/lbr/con-wago-508.lbr eagle/lbr/con-wago.lbr eagle/lbr/con-wago255.lbr eagle/lbr/con-weidmueller-sl35.lbr eagle/lbr/con-wenzhou-yihua.lbr eagle/lbr/con-xmultiple.lbr eagle/lbr/con-yamaichi.lbr eagle/lbr/crystal.lbr eagle/lbr/csr.lbr eagle/lbr/cypress.lbr eagle/lbr/davicom.lbr eagle/lbr/dc-dc-converter.lbr eagle/lbr/dimensions.lbr eagle/lbr/diode.lbr eagle/lbr/discrete.lbr eagle/lbr/display-hp.lbr eagle/lbr/display-kingbright.lbr eagle/lbr/display-lcd.lbr eagle/lbr/docu-dummy.lbr eagle/lbr/dom-key.lbr eagle/lbr/eagle-ltspice.lbr eagle/lbr/ecl.lbr eagle/lbr/elektro/DESCRIPTION eagle/lbr/elektro/e-elektro-zeichnungsrahmen.lbr eagle/lbr/elektro/e-elektromechanische-antriebe.lbr eagle/lbr/elektro/e-halbleiter.lbr eagle/lbr/elektro/e-klemmen.lbr eagle/lbr/elektro/e-kondensatoren.lbr eagle/lbr/elektro/e-lampen-signalisation.lbr eagle/lbr/elektro/e-messfuehler.lbr eagle/lbr/elektro/e-messinstrumente.lbr eagle/lbr/elektro/e-motoren.lbr eagle/lbr/elektro/e-motorschutzschalter.lbr eagle/lbr/elektro/e-schalter.lbr eagle/lbr/elektro/e-schuetze-relais.lbr eagle/lbr/elektro/e-sicherungen.lbr eagle/lbr/elektro/e-sps.lbr eagle/lbr/elektro/e-spulen-transformatoren.lbr eagle/lbr/elektro/e-steckverbinder.lbr eagle/lbr/elektro/e-stromversorgungselemente.lbr eagle/lbr/elektro/e-symbole.lbr eagle/lbr/elektro/eib-busch-jaeger.lbr eagle/lbr/element14/DESCRIPTION eagle/lbr/em-microelectronic.lbr eagle/lbr/etx-board.lbr eagle/lbr/exar.lbr eagle/lbr/fairchild-semic.lbr eagle/lbr/farnell.lbr eagle/lbr/fiber-optic-hp.lbr eagle/lbr/fiber-optic-siemens.lbr eagle/lbr/fifo.lbr eagle/lbr/flexipanel.lbr eagle/lbr/fox-electronics.lbr eagle/lbr/frames.lbr eagle/lbr/freescale.lbr eagle/lbr/ftdichip.lbr eagle/lbr/fujitsu.lbr eagle/lbr/fuse.lbr eagle/lbr/gennum.lbr eagle/lbr/halo-electronics.lbr eagle/lbr/heatsink.lbr eagle/lbr/holes.lbr eagle/lbr/holtek.lbr eagle/lbr/ic-package.lbr eagle/lbr/inductor-coilcraft.lbr eagle/lbr/inductor-neosid.lbr eagle/lbr/inductor-nkl.lbr eagle/lbr/inductors.lbr eagle/lbr/infineon-tricore.lbr eagle/lbr/infineon.lbr eagle/lbr/intersil-techwell.lbr eagle/lbr/intersil.lbr eagle/lbr/ir.lbr eagle/lbr/isd.lbr eagle/lbr/johanson-technology.lbr eagle/lbr/jump-0r-smd.lbr eagle/lbr/jumper.lbr eagle/lbr/lantronix.lbr eagle/lbr/lattice.lbr eagle/lbr/lc-filter.lbr eagle/lbr/led-7-segment.lbr eagle/lbr/led-citizen-electronics.lbr eagle/lbr/led-lumiled.lbr eagle/lbr/led.lbr eagle/lbr/lem.lbr eagle/lbr/linear-technology.lbr eagle/lbr/linear.lbr eagle/lbr/linx.lbr eagle/lbr/logo.lbr eagle/lbr/lprs.lbr eagle/lbr/lsi-computer-systems.lbr eagle/lbr/lumiled.lbr eagle/lbr/marks.lbr eagle/lbr/maxim.lbr eagle/lbr/maxstream.lbr eagle/lbr/melexis.lbr eagle/lbr/memory-hitachi.lbr eagle/lbr/memory-idt.lbr eagle/lbr/memory-micron.lbr eagle/lbr/memory-motorola-dram.lbr eagle/lbr/memory-nec.lbr eagle/lbr/memory-samsung.lbr eagle/lbr/memory-sram.lbr eagle/lbr/memory.lbr eagle/lbr/mems.lbr eagle/lbr/micrel.lbr eagle/lbr/micro-cyrod.lbr eagle/lbr/micro-fujitsu.lbr eagle/lbr/micro-harris.lbr eagle/lbr/micro-hitachi.lbr eagle/lbr/micro-infineon.lbr eagle/lbr/micro-intel.lbr eagle/lbr/micro-mc68000.lbr eagle/lbr/micro-motorola.lbr eagle/lbr/micro-philips.lbr eagle/lbr/micro-renesas.lbr eagle/lbr/micro-samsung.lbr eagle/lbr/micro-siemens.lbr eagle/lbr/microchip.lbr eagle/lbr/micron.lbr eagle/lbr/micronas.lbr eagle/lbr/microphon.lbr eagle/lbr/microwave.lbr eagle/lbr/midori-sensor.lbr eagle/lbr/minicircuits.lbr eagle/lbr/mitsubishi-semiconductor.lbr eagle/lbr/motorola-sensor-driver.lbr eagle/lbr/murata-filter.lbr eagle/lbr/murata-sensor.lbr eagle/lbr/nanotec.lbr eagle/lbr/national-instruments.lbr eagle/lbr/national-semiconductor.lbr eagle/lbr/nec-lqfp100-pack.lbr eagle/lbr/nec.lbr eagle/lbr/nrj-semiconductor.lbr eagle/lbr/omnivision.lbr eagle/lbr/on-semiconductor.lbr eagle/lbr/opto-honeywell-3000.lbr eagle/lbr/opto-honeywell-4000.lbr eagle/lbr/opto-honeywell.lbr eagle/lbr/opto-micro-linear.lbr eagle/lbr/opto-trans-siemens.lbr eagle/lbr/opto-transmittter-hp.lbr eagle/lbr/opto-vishay.lbr eagle/lbr/optocoupler.lbr eagle/lbr/pal.lbr eagle/lbr/philips-semiconductors.lbr eagle/lbr/photo-elements.lbr eagle/lbr/piher.lbr eagle/lbr/pinhead.lbr eagle/lbr/plcc-socket.lbr eagle/lbr/pld-intel.lbr eagle/lbr/plxtech.lbr eagle/lbr/pot-vitrohm.lbr eagle/lbr/pot-xicor.lbr eagle/lbr/pot.lbr eagle/lbr/ptc-ntc.lbr eagle/lbr/quantum-research-group.lbr eagle/lbr/rcl.lbr eagle/lbr/recom-international.lbr eagle/lbr/rectifier.lbr eagle/lbr/ref-packages-longpad.lbr eagle/lbr/ref-packages.lbr eagle/lbr/relay.lbr eagle/lbr/renesas.lbr eagle/lbr/resistor-bourns.lbr eagle/lbr/resistor-dil.lbr eagle/lbr/resistor-net.lbr eagle/lbr/resistor-power.lbr eagle/lbr/resistor-ruf.lbr eagle/lbr/resistor-shunt.lbr eagle/lbr/resistor-sil.lbr eagle/lbr/resistor.lbr eagle/lbr/rf-micro-devices.lbr eagle/lbr/rf-solutions.lbr eagle/lbr/rohm.lbr eagle/lbr/roundsolutions.lbr eagle/lbr/seeed/DESCRIPTION eagle/lbr/seeed/Seeed-OPL-Antenna.lbr eagle/lbr/seeed/Seeed-OPL-Button.lbr eagle/lbr/seeed/Seeed-OPL-Capacitor.lbr eagle/lbr/seeed/Seeed-OPL-Connector.lbr eagle/lbr/seeed/Seeed-OPL-Crystal-Oscillator.lbr eagle/lbr/seeed/Seeed-OPL-Diode.lbr eagle/lbr/seeed/Seeed-OPL-Display.lbr eagle/lbr/seeed/Seeed-OPL-Inductor.lbr eagle/lbr/seeed/Seeed-OPL-Moudle.lbr eagle/lbr/seeed/Seeed-OPL-Relay.lbr eagle/lbr/seeed/Seeed-OPL-Resistor.lbr eagle/lbr/seeed/Seeed-OPL-Switch.lbr eagle/lbr/seeed/Seeed-OPL-Transistor.lbr eagle/lbr/seeed/Seeed-OPL-for-customer-20151021.xlsx eagle/lbr/seeed/Seeed-OPL-fuse.lbr eagle/lbr/seeed/Seeed-OPL-ic.lbr eagle/lbr/seeed/Seeed-OPL-sensor.lbr eagle/lbr/semicon-smd-ipc.lbr eagle/lbr/sensor-comus-group.lbr eagle/lbr/sensor-heraeus.lbr eagle/lbr/sensor-infratec.lbr eagle/lbr/sharp.lbr eagle/lbr/silabs.lbr eagle/lbr/sim-technology.lbr eagle/lbr/sipex.lbr eagle/lbr/smd-ipc.lbr eagle/lbr/smd-special.lbr eagle/lbr/solomon-systech.lbr eagle/lbr/solpad.lbr eagle/lbr/speaker.lbr eagle/lbr/special-drill.lbr eagle/lbr/special.lbr eagle/lbr/st-microelectronics.lbr eagle/lbr/stm32xx.lbr eagle/lbr/supertex.lbr eagle/lbr/supply1.lbr eagle/lbr/supply2.lbr eagle/lbr/switch-alps.lbr eagle/lbr/switch-coto.lbr eagle/lbr/switch-dil.lbr eagle/lbr/switch-misc.lbr eagle/lbr/switch-omron.lbr eagle/lbr/switch-raychem.lbr eagle/lbr/switch-reed.lbr eagle/lbr/switch.lbr eagle/lbr/telcom.lbr eagle/lbr/telecontrolli.lbr eagle/lbr/telefunken.lbr eagle/lbr/test-mate.lbr eagle/lbr/testpad.lbr eagle/lbr/texas-sn55-sn75.lbr eagle/lbr/texas.lbr eagle/lbr/toshiba.lbr eagle/lbr/traco-electronic.lbr eagle/lbr/trafo-bei.lbr eagle/lbr/trafo-hammondmfg.lbr eagle/lbr/trafo-siemens.lbr eagle/lbr/trafo-xicon.lbr eagle/lbr/trafo.lbr eagle/lbr/transformer-pulse.lbr eagle/lbr/transistor-fet.lbr eagle/lbr/transistor-neu-to92.lbr eagle/lbr/transistor-npn.lbr eagle/lbr/transistor-pnp.lbr eagle/lbr/transistor-power.lbr eagle/lbr/transistor-small-signal.lbr eagle/lbr/transistor.lbr eagle/lbr/triac.lbr eagle/lbr/trimble.lbr eagle/lbr/tripas.lbr eagle/lbr/u-blox.lbr eagle/lbr/uln-udn.lbr eagle/lbr/v-reg-micrel.lbr eagle/lbr/v-reg.lbr eagle/lbr/varistor.lbr eagle/lbr/wafer-scale-psd.lbr eagle/lbr/wirepad.lbr eagle/lbr/xicor.lbr eagle/lbr/xilinx-virtex-v5.lbr eagle/lbr/xilinx-xc18v.lbr eagle/lbr/xilinx-xc9.lbr eagle/lbr/xilinx-xcv.lbr eagle/lbr/zetex.lbr eagle/lbr/zilog.lbr eagle/projects/DESCRIPTION eagle/projects/examples/DESCRIPTION eagle/projects/examples/arduino/Arduino_MEGA2560_ref.brd eagle/projects/examples/arduino/Arduino_MEGA2560_ref.sch eagle/projects/examples/arduino/DESCRIPTION eagle/projects/examples/arduino/eagle.epf eagle/projects/examples/elektro/DESCRIPTION eagle/projects/examples/elektro/stern-dreieck-anlauf.sch eagle/projects/examples/hexapod/DESCRIPTION eagle/projects/examples/hexapod/eagle.epf eagle/projects/examples/hexapod/hexapod.brd eagle/projects/examples/hexapod/hexapod.sch eagle/projects/examples/ltspice/3518-eagle.sch eagle/projects/examples/ltspice/3518.sch eagle/projects/examples/ltspice/DESCRIPTION eagle/projects/examples/ltspice/eagle.epf eagle/projects/examples/seeed/Base-Shield-V2/Base-Shield-v2.brd eagle/projects/examples/seeed/Base-Shield-V2/Base-Shield-v2.sch eagle/projects/examples/seeed/CAN-BUS-Shield-v1.2/CAN-BUS-Shield-v1.2.brd eagle/projects/examples/seeed/CAN-BUS-Shield-v1.2/CAN-BUS-Shield-v1.2.sch eagle/projects/examples/seeed/DESCRIPTION eagle/projects/examples/seeed/GPRS-Shield-V3.0/GPRS-Shield-v3.0.brd eagle/projects/examples/seeed/GPRS-Shield-V3.0/GPRS-Shield-v3.0.sch eagle/projects/examples/seeed/Grove-Button-v1.0/Grov-Button-v1.0.brd eagle/projects/examples/seeed/Grove-Button-v1.0/Grov-Button-v1.0.sch eagle/projects/examples/seeed/Grove-Relay/Grove-Relay-v1.2.brd eagle/projects/examples/seeed/Grove-Relay/Grove-Relay-v1.2.sch eagle/projects/examples/seeed/Seeeduino-Stalker-v3.0/Seeeduino-Stalker-v3.0.brd eagle/projects/examples/seeed/Seeeduino-Stalker-v3.0/Seeeduino-Stalker-v3.0.sch eagle/projects/examples/seeed/SeeeduinoV4.2/Seeeduino-v4.2.brd eagle/projects/examples/seeed/SeeeduinoV4.2/Seeeduino-v4.2.sch eagle/projects/examples/seeed/Xadow-Basic-Sensors-v1.0-sch_pcb/Xadow-Basic-Sensors-v1.0.brd eagle/projects/examples/seeed/Xadow-Basic-Sensors-v1.0-sch_pcb/Xadow-Basic-Sensors-v1.0.pdf eagle/projects/examples/seeed/Xadow-Basic-Sensors-v1.0-sch_pcb/Xadow-Basic-Sensors-v1.0.sch eagle/projects/examples/seeed/Xadow-GPS-v2-sch_pcb/Xadow-GPS-v2.brd eagle/projects/examples/seeed/Xadow-GPS-v2-sch_pcb/Xadow-GPS-v2.pdf eagle/projects/examples/seeed/Xadow-GPS-v2-sch_pcb/Xadow-GPS-v2.sch eagle/projects/examples/seeed/Xadow-NFC-v2-sch_pcb/Xadow-NFC-v2.brd eagle/projects/examples/seeed/Xadow-NFC-v2-sch_pcb/Xadow-NFC-v2.pdf eagle/projects/examples/seeed/Xadow-NFC-v2-sch_pcb/Xadow-NFC-v2.sch eagle/projects/examples/singlesided/DESCRIPTION eagle/projects/examples/singlesided/eagle.epf eagle/projects/examples/singlesided/singlesided.brd eagle/projects/examples/singlesided/singlesided.sch eagle/projects/examples/singlesided/singlesided_h.ctl eagle/projects/examples/singlesided/singlesided_v.ctl eagle/projects/examples/ti-launchpad/DESCRIPTION eagle/projects/examples/ti-launchpad/MSP-EXP430F5529LP.brd eagle/projects/examples/ti-launchpad/MSP-EXP430F5529LP.sch eagle/projects/examples/ti-launchpad/eagle.epf eagle/projects/examples/tutorial/DESCRIPTION eagle/projects/examples/tutorial/bus.sch eagle/projects/examples/tutorial/demo1.sch eagle/projects/examples/tutorial/demo2.brd eagle/projects/examples/tutorial/demo2.sch eagle/projects/examples/tutorial/demo3.brd eagle/projects/examples/tutorial/demo3.sch eagle/projects/examples/tutorial/hexapodu.brd eagle/projects/examples/tutorial/hexapodu.ctl eagle/scr/DESCRIPTION eagle/scr/default-assign.scr eagle/scr/defaultcolors.scr eagle/scr/delete-signals.scr eagle/scr/eagle.scr eagle/scr/elektro-init.scr eagle/scr/euro.scr eagle/scr/fill.scr eagle/scr/lbr-assign.scr eagle/scr/menu.scr eagle/scr/mylayers.scr eagle/scr/nofill.scr eagle/ulp/DESCRIPTION eagle/ulp/Felicitas_PCBSim.ulp eagle/ulp/bom.ulp eagle/ulp/cam2dxf.ulp eagle/ulp/cam2image.ulp eagle/ulp/cam2print-box-grey-optimize.bmp eagle/ulp/cam2print-box-grey-poscoord.bmp eagle/ulp/cam2print-box-grey-quickplot.bmp eagle/ulp/cam2print.ulp eagle/ulp/centroid-screamingcircuits-smd.ulp eagle/ulp/change-pad-in-lbr-1.bmp eagle/ulp/change-pad-in-lbr-x.bmp eagle/ulp/change-pad-in-lbr.ulp eagle/ulp/change-prefix-sch.ulp eagle/ulp/change-via-by-stack.ulp eagle/ulp/check-used-lbrs.ulp eagle/ulp/clear-layer-in-lbr.ulp eagle/ulp/cmd-change-brd-width.ulp eagle/ulp/cmd-change-class.ulp eagle/ulp/cmd-change-swap-layer.ulp eagle/ulp/cmd-change-value-group.ulp eagle/ulp/cmd-draw-group.bmp eagle/ulp/cmd-draw-hole-ellipse-calcstep.bmp eagle/ulp/cmd-draw-hole-ellipse-degstep.bmp eagle/ulp/cmd-draw-hole-ellipse4-calcstep.bmp eagle/ulp/cmd-draw-hole-ellipse4-degstep.bmp eagle/ulp/cmd-draw-hole-none-calcstep.bmp eagle/ulp/cmd-draw-hole-none-degstep.bmp eagle/ulp/cmd-draw-hole-none.bmp eagle/ulp/cmd-draw-move-circle-match-calcstep.bmp eagle/ulp/cmd-draw-move-circle-match-degstep.bmp eagle/ulp/cmd-draw-move-circle-no_match-calcstep.bmp eagle/ulp/cmd-draw-move-circle-no_match-degstep.bmp eagle/ulp/cmd-draw-move-ellipse-match-calcstep.bmp eagle/ulp/cmd-draw-move-ellipse-match-degstep.bmp eagle/ulp/cmd-draw-move-ellipse-no_match-calcstep.bmp eagle/ulp/cmd-draw-move-ellipse-no_match-degstep.bmp eagle/ulp/cmd-draw-move-ellipse4-match-calcstep.bmp eagle/ulp/cmd-draw-move-ellipse4-match-degstep.bmp eagle/ulp/cmd-draw-move-ellipse4-no_match-calcstep.bmp eagle/ulp/cmd-draw-move-ellipse4-no_match-degstep.bmp eagle/ulp/cmd-draw-move-match-ellipse-none.bmp eagle/ulp/cmd-draw-move-match-none.bmp eagle/ulp/cmd-draw-move-no_match-ellipse-none.bmp eagle/ulp/cmd-draw-move-no_match-none.bmp eagle/ulp/cmd-draw-pad-ellipse-calcstep.bmp eagle/ulp/cmd-draw-pad-ellipse-degstep.bmp eagle/ulp/cmd-draw-pad-ellipse4-calcstep.bmp eagle/ulp/cmd-draw-pad-ellipse4-degstep.bmp eagle/ulp/cmd-draw-pad-none-calcstep.bmp eagle/ulp/cmd-draw-pad-none-degstep.bmp eagle/ulp/cmd-draw-pad-none.bmp eagle/ulp/cmd-draw-polygon-circle-calcstep.bmp eagle/ulp/cmd-draw-polygon-circle-degstep.bmp eagle/ulp/cmd-draw-polygon-contours-as-wire.ulp eagle/ulp/cmd-draw-polygon-ellipse-calcdeg.bmp eagle/ulp/cmd-draw-polygon-ellipse-calcstep.bmp eagle/ulp/cmd-draw-polygon-ellipse-degstep.bmp eagle/ulp/cmd-draw-polygon-ellipse-none.bmp eagle/ulp/cmd-draw-polygon-ellipse4-calcstep.bmp eagle/ulp/cmd-draw-polygon-ellipse4-degstep.bmp eagle/ulp/cmd-draw-polygon-ellipse4-none.bmp eagle/ulp/cmd-draw-polygon-none-calcstep.bmp eagle/ulp/cmd-draw-polygon-none.bmp eagle/ulp/cmd-draw-smd-circle-match-calcstep.bmp eagle/ulp/cmd-draw-smd-circle-match-degstep.bmp eagle/ulp/cmd-draw-smd-circle-no_match-calcstep.bmp eagle/ulp/cmd-draw-smd-cricle-no_match-degstep.bmp eagle/ulp/cmd-draw-smd-ellipse-match-calcstep.bmp eagle/ulp/cmd-draw-smd-ellipse-match-degstap.bmp eagle/ulp/cmd-draw-smd-ellipse-no_match-calcstep.bmp eagle/ulp/cmd-draw-smd-ellipse-no_match-degstep.bmp eagle/ulp/cmd-draw-smd-ellipse4-match-calcstep.bmp eagle/ulp/cmd-draw-smd-ellipse4-match-degstep.bmp eagle/ulp/cmd-draw-smd-ellipse4-no_match-calcstep.bmp eagle/ulp/cmd-draw-smd-ellipse4-no_match-degstep.bmp eagle/ulp/cmd-draw-smd-match-degstep.bmp eagle/ulp/cmd-draw-smd-match-none.bmp eagle/ulp/cmd-draw-smd-no_match-degsetp.bmp eagle/ulp/cmd-draw-smd-no_match-none.bmp eagle/ulp/cmd-draw-wire-calc-ellipse.bmp eagle/ulp/cmd-draw-wire-calcstep-none.bmp eagle/ulp/cmd-draw-wire-circle-calcstep.bmp eagle/ulp/cmd-draw-wire-circle-degstep.bmp eagle/ulp/cmd-draw-wire-clac-ellipse4.bmp eagle/ulp/cmd-draw-wire-degstep-none.bmp eagle/ulp/cmd-draw-wire-ellipse.bmp eagle/ulp/cmd-draw-wire-none.bmp eagle/ulp/cmd-draw-wire-step-ellipse.bmp eagle/ulp/cmd-draw-wire-step-ellipse4.bmp eagle/ulp/cmd-draw.ulp eagle/ulp/cmd-net-list2sch.ulp eagle/ulp/cmd-netscript2sch.ulp eagle/ulp/cmd-place-restrict-name-value.ulp eagle/ulp/cmd-rename-in-lbr.ulp eagle/ulp/cmd-renumber.ulp eagle/ulp/cmd-showzoom.ulp eagle/ulp/cmd-snap-board.ulp eagle/ulp/cmd-snappads.ulp eagle/ulp/component-array.ulp eagle/ulp/connect-device-split-symbol.ulp eagle/ulp/copy-attrib-sch-to-brd.ulp eagle/ulp/copy-attribute-at-deviceset.ulp eagle/ulp/copy-silk-screen.ulp eagle/ulp/copy-text-as-wire.ulp eagle/ulp/copy-wire-to-any-layer.ulp eagle/ulp/copy-wire-to-solder-mask.ulp eagle/ulp/count.ulp eagle/ulp/del-devices.ulp eagle/ulp/del-empty-devices.ulp eagle/ulp/del-pack-sym.ulp eagle/ulp/designlink-inc.ulp eagle/ulp/designlink-lbr.ulp eagle/ulp/designlink-order.ulp eagle/ulp/dif40.ulp eagle/ulp/dose-pro.ulp eagle/ulp/drill-aid.ulp eagle/ulp/drillcfg.ulp eagle/ulp/drillegend-stack.ulp eagle/ulp/dxf.ulp eagle/ulp/e-attributverwaltung.ulp eagle/ulp/e-bauteil-erstellen.ulp eagle/ulp/e-brueckenverwaltung.ulp eagle/ulp/e-klemmenplan.ulp eagle/ulp/e-makelist.ulp eagle/ulp/e-packages-aus-devices-pin-ist-padname.ulp eagle/ulp/eagle.bmp eagle/ulp/eagleidfexporter.ulp eagle/ulp/ecadio.ulp eagle/ulp/edit-used-dev-pac-sym.ulp eagle/ulp/editnext-dev-sym-pac.ulp eagle/ulp/editnext-lbr.ulp eagle/ulp/editnext-sheet.ulp eagle/ulp/editprev-dev-sym-pac.ulp eagle/ulp/editprev-lbr.ulp eagle/ulp/editprev-sheet.ulp eagle/ulp/ex-argv-path.ulp eagle/ulp/ex-dialogs.ulp eagle/ulp/ex-dlglist.ulp eagle/ulp/ex-file-copy.ulp eagle/ulp/ex-include.ulp eagle/ulp/ex-input-file.ulp eagle/ulp/ex-loop-lbrs.ulp eagle/ulp/ex-run-script.ulp eagle/ulp/exp-descr-html.ulp eagle/ulp/exp-descr-script.ulp eagle/ulp/exp-lbrs.ulp eagle/ulp/exp-palette.ulp eagle/ulp/exp2image.ulp eagle/ulp/export-class.ulp eagle/ulp/export-error.ulp eagle/ulp/export-ict-netlist-pad-coordinates.ulp eagle/ulp/fabmaster.ulp eagle/ulp/fill-via4vacuum.ulp eagle/ulp/find-single-ended-wire.ulp eagle/ulp/find.ulp eagle/ulp/gen-3d-idf-pac.ulp eagle/ulp/generate-3d-idf-data.ulp eagle/ulp/generate-dummy-package-and-connect.ulp eagle/ulp/gluemark.ulp eagle/ulp/glueout.ulp eagle/ulp/hyperlynx.ulp eagle/ulp/import-accel.ulp eagle/ulp/import-bmp-c256.bmp eagle/ulp/import-bmp-dpi.bmp eagle/ulp/import-bmp-ratio.bmp eagle/ulp/import-bmp-scale.bmp eagle/ulp/import-bmp.ulp eagle/ulp/import-dxf.ulp eagle/ulp/import-gerber.ulp eagle/ulp/import-pads-powerpcb-v5.ulp eagle/ulp/import-ultiboard-ddf.ulp eagle/ulp/ipc-d-356.ulp eagle/ulp/layer-sequence-arrowdown.png eagle/ulp/layer-sequence-arrowup.png eagle/ulp/layer-sequence.ulp eagle/ulp/length-freq-ri.ulp eagle/ulp/length.ulp eagle/ulp/lpp.ulp eagle/ulp/make-group2pac.ulp eagle/ulp/make-long-pad-inner-layer.ulp eagle/ulp/make-package-consistent-brd-sch.ulp eagle/ulp/make-symbol-device-package-bsdl.ulp eagle/ulp/make-value-consistent.ulp eagle/ulp/make_bga_package.bmp eagle/ulp/make_package_dual.bmp eagle/ulp/make_package_meass_pacinfo.bmp eagle/ulp/make_package_meass_pacinfo2.bmp eagle/ulp/make_package_meass_padinfo-oct.bmp eagle/ulp/make_package_meass_padinfo-round.bmp eagle/ulp/make_package_meass_padinfo-sqr.bmp eagle/ulp/make_package_meass_smdinfo.bmp eagle/ulp/make_package_quad_left.bmp eagle/ulp/make_package_quad_middle.bmp eagle/ulp/make_symbol_dual1.bmp eagle/ulp/make_symbol_dual2.bmp eagle/ulp/make_symbol_quad.bmp eagle/ulp/make_symbol_single.bmp eagle/ulp/make_symbol_stripe.bmp eagle/ulp/manufacturing.ulp eagle/ulp/maskdata.ulp eagle/ulp/microstrip-radial-stub.bmp eagle/ulp/microstrip-radial-stub.ulp eagle/ulp/mill-outlines-bott.bmp eagle/ulp/mill-outlines-cnc-dim-down.bmp eagle/ulp/mill-outlines-cnc-down.bmp eagle/ulp/mill-outlines-cnc-drill-down.bmp eagle/ulp/mill-outlines-cnc-drill-safety.bmp eagle/ulp/mill-outlines-cnc-fastvelocity.bmp eagle/ulp/mill-outlines-cnc-parkposition.bmp eagle/ulp/mill-outlines-cnc-rpm.bmp eagle/ulp/mill-outlines-cnc-safety.bmp eagle/ulp/mill-outlines-cnc-up.bmp eagle/ulp/mill-outlines-cnc-velocity.bmp eagle/ulp/mill-outlines-cnc.bmp eagle/ulp/mill-outlines-coppdim.bmp eagle/ulp/mill-outlines-dimension-contours.bmp eagle/ulp/mill-outlines-drc-info.bmp eagle/ulp/mill-outlines-drill-velocity.bmp eagle/ulp/mill-outlines-drill.bmp eagle/ulp/mill-outlines-eagle.bmp eagle/ulp/mill-outlines-free.bmp eagle/ulp/mill-outlines-get_board_zero.bmp eagle/ulp/mill-outlines-hole.bmp eagle/ulp/mill-outlines-hpgl.bmp eagle/ulp/mill-outlines-inner-polygon-contour.bmp eagle/ulp/mill-outlines-inner-polygon-contour1.bmp eagle/ulp/mill-outlines-inside-milling.bmp eagle/ulp/mill-outlines-isel.bmp eagle/ulp/mill-outlines-isol-pour.bmp eagle/ulp/mill-outlines-mildimension.bmp eagle/ulp/mill-outlines-mirror-nc-bottom.bmp eagle/ulp/mill-outlines-mirror-nc-top.bmp eagle/ulp/mill-outlines-mirror.bmp eagle/ulp/mill-outlines-multi-dimension.bmp eagle/ulp/mill-outlines-no-blowup.bmp eagle/ulp/mill-outlines-nomir.bmp eagle/ulp/mill-outlines-null_reference-drilling.bmp eagle/ulp/mill-outlines-null_reference.bmp eagle/ulp/mill-outlines-ovrlpfp.bmp eagle/ulp/mill-outlines-ovrlppp.bmp eagle/ulp/mill-outlines-plus-text.bmp eagle/ulp/mill-outlines-pour.bmp eagle/ulp/mill-outlines-question.bmp eagle/ulp/mill-outlines-resolution.bmp eagle/ulp/mill-outlines-script.bmp eagle/ulp/mill-outlines-sec-isol.bmp eagle/ulp/mill-outlines-sec-isolate.bmp eagle/ulp/mill-outlines-spacing.bmp eagle/ulp/mill-outlines-top.bmp eagle/ulp/mill-outlines-via.bmp eagle/ulp/mill-outlines.def eagle/ulp/mill-outlines.ulp eagle/ulp/mirror-board-remirror-element-swap-layer.ulp eagle/ulp/mirror-board.ulp eagle/ulp/mkdir.ulp eagle/ulp/mount-marks-smd.ulp eagle/ulp/mount-marks.ulp eagle/ulp/mount-smd-tht.ulp eagle/ulp/mount-trace.ulp eagle/ulp/mount.ulp eagle/ulp/mountsmd.ulp eagle/ulp/net-bus-labeling.ulp eagle/ulp/netlist-converter.ulp eagle/ulp/nextdevdescript.ulp eagle/ulp/nextpacdescript.ulp eagle/ulp/normalize-text.ulp eagle/ulp/outlines.ulp eagle/ulp/panelize.ulp eagle/ulp/part2html.ulp eagle/ulp/pcb-service.ulp eagle/ulp/prevdevdescript.ulp eagle/ulp/prevpacdescript.ulp eagle/ulp/print-inductor-ulp.bmp eagle/ulp/print-inductor.ulp eagle/ulp/print-spiral.bmp eagle/ulp/print-transparent-brd.ulp eagle/ulp/remove-dev-sym-pac.ulp eagle/ulp/remove-unused-packages.ulp eagle/ulp/rename-signal.ulp eagle/ulp/renamnet-suffix.ulp eagle/ulp/renumber-sheet.ulp eagle/ulp/run-loop-all-devicesets-script.ulp eagle/ulp/run-loop-all-lbr-script.ulp eagle/ulp/run-loop-all-lbr-ulp.ulp eagle/ulp/run-loop-all-packages-script.ulp eagle/ulp/run-loop-all-schematic-script.ulp eagle/ulp/run-loop-all-symbols-script.ulp eagle/ulp/save-brd-variants.ulp eagle/ulp/select-sch-group-to-brd-group.ulp eagle/ulp/set-all-devices-attribute.ulp eagle/ulp/set_name_value.ulp eagle/ulp/show-group.ulp eagle/ulp/showclass.ulp eagle/ulp/silk.ulp eagle/ulp/smash-all-sch.ulp eagle/ulp/smd-coordinate.ulp eagle/ulp/snap-on-grid-sch.ulp eagle/ulp/snap-pin-in-symbol.ulp eagle/ulp/spiceorder.ulp eagle/ulp/spin-all.ulp eagle/ulp/spiral-coil-ulp.bmp eagle/ulp/spiral-coil.ulp eagle/ulp/split-device-symbol.ulp eagle/ulp/statistic-brd-checkmin.val eagle/ulp/statistic-brd.ulp eagle/ulp/statistic-copper-plane.ulp eagle/ulp/statistic-lbr.ulp eagle/ulp/statistic-sch.ulp eagle/ulp/statistic_attention_min_value.bmp eagle/ulp/teardrops.ulp eagle/ulp/trace-layer.ulp eagle/ulp/ulpmessage.ulp eagle/ulp/unidat.ulp eagle/ulp/update-packages.ulp eagle/ulp/useful-routines.ulp eagle/ulp/via-mask-one-layer.ulp eagle/ulp/warning.bmp @ 1.12 log @Updated cad/eagle to 7.7.0 -------------------------- Release notes for EAGLE 7.7.0 ============================= * Licensing: - Update of various spots in EAGLE regarding the license changes introduced by Autodesk: Standard, Premium, Ultimate, Express and Educational. The 30 day trial license has been removed. * ULPs: - Added 'manufacturing.ulp' provided by Autodesk. It supports an upload of EAGLE drawing files to 'circuits.io' in order to generate manufacturing data which can then be downloaded. The ULP is accessible as an icon in the board editor. - Added 'ecadio.ulp' provided by Autodesk. It supports an upload of EAGLE boards to 'ecad.io' in order to generate a 3D PCB for use in MCAD systems. The ULP is accessible as an icon in the board editor. * UI improvements: - Added Option.SignalNames to display the signal names on the signal wires and on the connected pads and SMDs. It can be set in the Settings dialog under 'Misc/Display signal names'. - The options Option.SignalNames, Option.PadNames and Option.ViaLength are set to 'On' by default. * Miscellaneous: - Improved visibility of scrollbars for common window styles on Linux. - Silently ignoring double references to a contact within a signal when loading a board file. - CAM Processor: when running 'Process Job' with more than one section, it is checked if the job covers the Layer Setup only partially. - The file locking option has been switched off by default. Use 'Backup/Locking' under 'Options' in Control Panel to turn it on. - Update of EAGLE logo to the new appearance since Autodesk acquisition. - Update of Hungarian translation (GUI without help and manual). * Bugfixes: - Fixed UL functions strsplit() and lookup() to handle unusual UTF8 characters as separator. - Fixed potential crash of the 64 bit versions when loading EAGLE drawings from old format (e.g. V3.55). - Image export to TIFF format in monochrome: fixed a regression regarding the compression method. - The selected object is no longer removed from the group after running a ULP started through 'SET CONTEXT Object ...'; the ULP might want to use this one-object group afterwards with e.g. 'exit("move (>@@)")'. - Ensuring valid move of polygon wires or an entire polygon if selecting a wire with 'SET CONTEXT Wire ...' or using setgroup() in a ULP. - Fixed history of dlgStringEdit to become case sensitive. - Fix for refresh of images in Control Panel preview on Windows. - Added a check for identical pinrefs when loading a schematic to avoid a possible crash. - Fixed deleting/splitting busses with portrefs involved: it could happen that new port connections couldn't be established anymore. - Fixed selecting an end of a wire with the context menu. - Fix for ULP function ingroup() returning true for too many objects after UNDOing of transferring a group to another sheet. @ text @d1 1 a1 1 @@comment $NetBSD$ @ 1.11 log @Updated cad/eagle to 7.6.0, ( Following is from doc/UPDATE_en) -------------------------- Release notes for EAGLE 7.6.0 ============================= * Platforms: - Since EAGLE requires OS X 10.8 or higher on MAC which are all 64 bit OS, we are no longer providing the 32 bit version for MAC. * EDIT command: - Now the EDIT command allows changing to the proper editor window with 'edit .sch' and 'edit .brd' even in the library editor. * USE command: - Extended syntax for USE to unuse a specific library (use -a.lbr). - The USE command can now also be called in the library editor (although the list of used libraries is only relevant in schematic or board editor). * Miscellaneous: - Ensuring the requested precision on linear dimension values even if there are trailing zeroes. - Now the net class is copied if a signal polygon is renamed to a new signal. - Termination of EAGLE by watchdog if the improper 'eagle.exe' is used together with the CAM processor option '-X'. - The User Language dialog object dlgTabWidget now accepts a parameter 'Index'; it has to be an integer variable and can be used to set the initial dlgTabPage and to get the index of the current dlgTabPage. - Added a note to help about eaglecon.exe including a warning regarding the closing of it. - Avoiding unintended deletion of several MUST gates w/o using Shift+Left. - Added a 'save-brd-variants.ulp' which can be used to save a board file for each assembly variant (may be used to prepare CAM output). - Added entry 'DXF' to File/Import sub menu of the library editor in package or symbol edit mode. - The color entries #7 (DARKGRAY) of the white and the colored palette have been changed to darker values; the same applies to 'defaultcolors.scr'. - Changed UPDATE behavior for variable attributes: retaining changes in schematic and board. - Added an option to textually display the via length. It can be set in the Settings dialog under 'Misc' or with 'SET Option.ViaLength 1|0'. - Improved support for high DPI displays: providing the high resolution for enlarged icons and dialog texts. - Added a note to help for COPY of library objects regarding paths. - Improved error message when a CAM job or section is tried to start but no board or schematic is loaded. - Added auto connection of ports if MOVEing them on each other. - Added exp-palette.ulp for exporting the color palettes to an EAGLE script. - Improved construction of a polygon: now the last wire piece can be removed with the escape key. - Avoiding drag&drop in Control Panel by unintended click of the mouse wheel button. - Added a warning about connections from a contact to several signals while loading a board (there's no known way to achieve this illegal state within EAGLE, though). - Now the OPTIMIZE command is available in all drawing editor types apart from the device editor. - The groupwise moving of smashed texts of a locked element is now inhibited only if the element is included in the moved group, too. - Added cross probing (highlighting) of signals to a module net that has generated the corresponding signal(s) completely. - CAM Processor: when running 'Process Job' it is being checked if the job covers the Layer Setup. * Bugfixes: - Taking into account connected ports to avoid 'Only one pin on net' ERC error messages. - Added Use and Un-Use buttons (with tool tips) in the ADD dialog to countervail the (since V7.3) missing Drop button. - Fix for wrong splitter position in device edit mode that could appear after switching between different edit modes in library editor. - Fix for EAGLE in command line mode: it could happen that a given command sequence (option -C) was executed in the wrong editor window. - Made the return key in Control Panel work again for activation of tree entries. - Fix for a parse error if in a CAM job description the sequence '="' was used. - Avoiding references to ports of wrong type in bus or net segments. - Fix to avoid pending file locks if EAGLE is closed over 'close all windows' in the taskbar. - Marking lock files as hidden also on Windows. - Fix for window positions and other project settings not stored on MAC if EAGLE was closed with 'Quit' in the application menu. - Fixed drawing SMDs with roundness, if printing with option ROTATE. - Avoiding temporary (not intended) mirroring of gates with the middle mouse button when moving them in the device editor. - Ensuring the proper device (package variant), if automatically changing into the invoke mode while adding a device. - bom.ulp: Fixed handling descriptions containing TAB characters. - Changed handling of package names in the UPDATE command used in a library to case insensitive (syntax 'UPDATE package_name@@library_name'). - Added validation of bus name when it is changed by command line with 'NAME newBusName'. - Ensuring proper cap style if constructing a new ARC. - Made the popup menus for parameterbar, toolbar and commandbar buttons work again on MAC. - Denying renaming or deletion of a file in the Control Panel if a corresponding lock file exists. - Printing: fixed possibly missing caption and offsetted image on Windows. - Fixed a possible inconsistency after library update with device sets involved that couldn't be found in the new library and other special conditions. - Fixed possible graphical artefacts when copying parts or elements by GROUP/CUT/PASTE or COPY of a group. - Fix for printing of non solid color fill styles to PDF. - Made printing of non solid fill styles work again on Linux; clearer output also on MAC. - Fixed ADD dialog: no longer ignoring the first selection after clearing the search field. - Ensuring that only a schematic is imported into an existing module (PASTE from file). It was possible to import a schematic/board pair which lead to inconsistency. - Fixed ULP filesize function for non existing files (now 0 is returned). - Fixed dlgListView to execute the statement only if a valid item was doubleclicked. - Now dlgListView sets the parameter 'Selected' to -1 if nothing is selected (see help). - Avoiding a crash if trying to ROTATE a locked element with Click&Drag. - Avoiding a locked element to become invisible if trying to MOVE it by name (input e.g. 'move X10'). - Fixed f/b annotation if deleting a connection to a power pin and the gate of this pin is placed in a module. - Fixed unjustified ERC error message regarding an incompatibility of HIZ pins on a net which is exported by a module with a PWR port. - Avoiding a file locking conflict (timing issue) during library export. - Fixed loss of the net wire if moving already connected ports on each other and separating them again. - Avoiding a too early deactivation of automatic confirmation mode during QUIT (to avoid an undesired message stopping QUIT). - Fixed generation of net wires if changing a module with direct connection of port to port or pin. - Fixed saving XML texts in drawings: drop invalid characters entered as texts or descriptions (e.g by copy&paste). - Improved validation of the port name if setting up a new port. - Made UPDATEing libraries work with several dots like 'abc.ok.lbr'. - Fixed drawing of mirrored or rotated frames. - Changed handling of signal names in the OPTIMIZE command to case insensitive. - Fixed ROUTE command with differential pairs; sometimes the initial wire width was wrong. - Avoiding a stuck progress bar if terminating a ULP with an exit code within a script. - Fixed possibly wrong window positions in case of a multi monitor setup on Windows; improved handling of window restoration for multi monitor setup. - Fixed a misinterpretation of colons in a sheet description; switching to such a sheet with the sheet combobox didn't work. - Fixed vanishing of smashed texts during MOVE of a group if the associated element is locked. - Fixed update of sheet thumbnails after adding a PORT. - Fixed WINDOW FIT due to wrong calculation of the bounding box regarding the cross-reference display area on MUST gates; only gates with text place- holder '>XREF' are taken into account. - Avoiding use of the colon for modules and module prefixes. It is reserved as hierarchical name separator. - Fixed net renaming issue: Renaming a net with segments on several sheets over the INFO dialog could lead to inconsistency and empty net names. @ text @d3 1 d16 1 a223 3 eagle/bin/permanent-de.png eagle/bin/permanent-euen.png eagle/bin/permanent-row.png a231 2 eagle/bin/splash-de.png eagle/bin/splash-en.png a250 2 eagle/doc/license_de.txt eagle/doc/license_en.txt d905 1 d976 1 @ 1.10 log @Update 7.4.0 to 7.5.0 (2015/11/17) --------------------- * EAGLE Editions: - The EAGLE Freeware edition now starts with a temporary advertisement window and the Control Panel has got an advertisement section. - For the EAGLE Light edition (both Freeware and Commercial) the number of available schematic sheets has been increased to 2. * GUI: - Now the icons in EAGLE are scalable (see Options menu in Control Panel). The icons are in SVG format and stored in folder 'icons' under the bin folder. The classic set of EAGLE icons is not available in SVG format and therefore not scalable. - Added highlighting of the current group if starting GROUP command. - Added tool tips to the DRC/ERC error list containing the error descriptions. * ULPs: - Update of various ULPs integrated into EAGLE's editors: - In the Board editor under File/Export the entries 'Unidat' (unidat.ulp) and 'DIF4.0' (dif40.ulp) have been taken out. An entry 'Mount SMD' has been added (starting mountsmd.ulp). - In the Board editor under File/Import the entry 'Ultiboard' (import-ultiboard-ddf.ulp) has been taken out. The new entries 'DXF' and 'Gerber' have been added, executing import-dxf.ulp resp. import-gerber.ulp. The Gerber import is a new functionality. Import of DXF is available in the Schematic editor as well. - In the Board editor under Tools the new entries 'Element array placement' (new component-array.ulp) and 'Mirror board' (mirror-board.ulp) have been added. - In the Library editor there is now File/Import with entry 'BSDL', starting make-symbol-device-package-bsdl.ulp. * Miscellaneous: - Extension of proxy settings by an optional username and password. Saving of the password is also optional and in an encrypted form. See Help/Check for Update/Configure in Control Panel. - Added a special DRC error for intersecting signal polygons with same rank. - Workaround for Linux 64 bit, because Red Hat (RHEL 6.6) is not yet providing an up-to-date GLIBC library. - Implementation of a basic file locking mechanism: by default any files that are loaded into an EAGLE editor are locked, i.e. not available for writing by other EAGLE instances. Locked files are reported to the user. He can retry getting the file, save under a different name, continue editing without saving or break the lock. The locking can be switched off which is saved in eaglerc user settings. - Added a new set of schematics, boards and libraries from 3rd party 'seeed'. The libraries are in a directory 'seeed' under the library folder, the schematics and boards in examples/'seeed' under the projects folder. See also www.seeed.cc. * Bugfixes: - Fix for not searchable PDF printings on MAC. - Fix to avoid intensive network traffic caused by GUI elements of the autorouter. - Fixed unusable confirm dialog in CAM processor; under special conditions it could be blocked by the progress dialog. - Fix for wrong display of mirrored texts in package previews. - Fixed handling of vias if reselecting a differential pair for routing. - If starting the autorouter, the TopRouter is now checking whether the board is already routed completely. - Made image export to TIFF format work again. There was a regression in V7.3. - Restored V6 behavior for designs w/o hierarchy if combining or renaming net segments, which could cause unnecessary ripups. - Now 64 colors of all palettes are initialized. - Correction of the number of available layers for 'Make Personal' edition from 4 to 6. - Keeping order of 'SET CONTEXT' commands if displaying the context menu. - Avoiding a crash on Mac if closing a drawing window with Command(Apple)-W immediately after loading a board and schematic pair and restoring the minimized partner. @ text @d313 15 d675 1 d883 1 d928 1 d1038 1 d1068 1 a1068 1 eagle/ulp/save-variants4cam.ulp @ 1.9 log @Update 7.3.0 to 7.4.0 --------------------- Release notes for EAGLE 7.4.0 ============================= * EAGLE Editions: - CadSoft now provides an EAGLE "Make Pro" edition with capabilities similar to Standard edition. In particular the board area is limited to 160x100mm, but board width and height can be adjusted. The license is limited to one year and an internet connection is required. - There is also a new edition "Make Personal" available which was previously called "EAGLE Hobbyist". * COPY command: - Beside device sets and packages the COPY command now can also copy symbols. - If the library name is skipped in the command syntax the currently opened library is taken as source (see help for details). * Control Panel: - Added entry 'COPY to library' to context menu for symbols. - Support for Drag&Drop for symbols from Control Panel to Library Editor and of all library object types to the overview (table of contents) mode of the Library Editor. * Library Editor: - Addition of 'Duplicate' to context menu for symbols in the overview (table of contents) mode. - Added tool tips to the TOC view of the library editor window containing the headlines of the respective descriptions. * Help improvements: - Added examples for CHANGE DLINE. - Improved description of PORT regarding buses and of PACKAGE regarding 'name'. - Added a section 'Special attributes' regarding the special role of attribute 'VALUE'. - Improved description of UL_PART.variants(); extended example for UL_VARIANT. - Added explanation on top/bottom pairs of custom layers. * Miscellaneous: - Added a set of design rule files from Eurocircuits and Wuerth Electronic to design rule folder. - Added a new CAM job file gerb274x-mill-drill.cam for generating milling output with Gerber and drill data output with Excellon in one action. * Bugfixes: - Ignoring a potentially given but superfluous extension in COPY X.PAC@@abc.lbr Y[.pac]; same for .dev. - Fix for locale dependant problems when entering decimal numbers in unit fields. - Changed misleading text in the Linux install script. - Fixed handling of newly added empty global attributes. - Fix for proper support of EAGLE 64 bit on MAC OS X 10.8. - Fixed interpretation of scroll and zoom gestures from trackpads on MAC. - Fix for 'Duplicate' in context menu for device sets and packages in the library editor's overview mode when duplicating unsaved objects. - Improved drawing performance for panning under Linux; there was a regression after version 7.2.0. - Fix for support of country specific decimal point (like ',') in command line and scripts (after 7.2.0 only '.' worked). - 'Duplicate' in context menu for library objects: restriction in the naming dialog to allowed characters for object names. - Fix for a crash in the autorouter when evaluation was done with invalid job files. - Fix for umlaut problem in installation text on MAC. - The ROUTE command with Ctrl+Left can now also start routing at a pad; this is important to start from a pad without airwire if the connect mode is set to 'any'. - Now the first selection point for DIMENSION is only snapped if coming from a mouse click. - Fixed update of thumbnails after removing a module. - Fix for long printing times on Windows (there was a regression since V7.3). - Fixed context menu handling for PACKAGE/TECHNOLOGY after clicking "Next" in case of an ambiguous selection. The command was still referring to the previous object. - Fixed >LAST_DATE_TIME in CAM Processor output; it has been stuck at 'not saved' if during an EAGLE session a new drawing has been generated. - Fixed displaying license data containing umlauts. - Fix for EAGLE in commandline mode: it could happen that a given command sequence (option -C) was executed in the wrong editor window. - Fixed triggering the default button 'OK' by ENTER key in the CONNECT dialog; if the focus was in a list, the list action was executed inadvertently. - Fix for initially missing display of the 'Window' menu in MAC menubar. - Correction of eagle.def concerning the output formats GERBER_RS274X_33MM and EXCELLON_33MM (introduced in V7.2.1). - Fix regarding continuation of an existing autorouter job after previous cancel. - Added an initial check if the board was changed before continuation of an existing autorouter job. - Fix in DRC for undetected overlapping polygons in special cases. - Fix for inaccessible minimized partner window if a schematic or board was opened. This was a problem on several Linux distributions. - Fix for undesired focus changes on MAC between EAGLE editor windows. - Reactivated beep if clicking into the drawing area w/o causing an actual selection (e.g. in ROUTE command). - Fixed ERC messages for nets containing UTF-8 characters. - Changed the polygon calculation within the CAM Processor to vector font, because texts are always using vector font in the CAM Processor. - Added a hint to use the default grid in schematics. - Ignoring unjustified offset position if pasting a module. - Ensuring unique naming if copying symbols. - Fixed initial display of TOC in libraries if loaded within a project. - Made ADD link in Control Panel for symbols work. - Fixed annotation of deleting a module instance; deleting the respective signals in the board completely if there is no port. @ text @d3 1 a3 1 eagle/bin/designlink22.png d5 1 d16 204 d222 3 d233 2 d611 18 d711 24 d865 1 d932 1 @ 1.8 log @Update to eagle-7.3.0. Changes since version 4 are much to numerous to list but include for example a new autorouting tool, 64-bit support and usability improvements in all subsystems such as editor, CAM processor and component library. @ text @d28 1 d60 44 d243 1 d481 1 a614 1 eagle/ulp/copy-layer-to-any-layer.ulp d617 1 @ 1.7 log @Update eagle to 4.16r2. (distfile for 4.14 are not available, so up to latest for 4.1x). Release notes for EAGLE 4.16r2 ============================ * Bugfixes: - Fixed generating pixmaps that are much longer in one dimension with the EXPORT IMAGE command. - Fixed handling the net class when renaming a net segment to a new name. - Fixed a crash when clicking into the empty area of the Technologies dialog. - Fixed an 'Internal polygon error 73' when zooming far in on a board that contains smds with a roundness other than 0. Release notes for EAGLE 4.16r1 ============================== * Bugfixes: - Fixed handling '\' in UNC program file name under Windows XP in case the program is installed on a server. - Fixed handling the ESCape key in ULPs with nested dialogs. - Fixed handling the program file name under Windows if it starts with ".\". - Fixed handling German umlauts in the User Language functions strupr(), strlwr(), toupper() and tolower() under Windows and Mac OS X. - Fixed setting the current item in the Control Panel's tree view when drag&dropping a package into a library in case there is also a device set with the same name. - Fixed unexpected airwires in case an open Pwr pin is connected to a net with the same name, or a Supply pin with the same name is placed on an open Pwr pin. - Fixed printing rotated or mirrored texts under Linux and Mac OS X. - Fixed handling upper/lowercase when licensing under Windows on a server. - Fixed handling the highest byte of the Palette values in the eaglerc file. - Fixed handling polygons with only two edges, in case one of them is an arc. Release notes for EAGLE 4.16 ============================ * Bugfixes: - Fixed CUT/PASTE of net classes (only the first two were actually pasted). - Fixed handling library name after "Save as" (was wrong in Description editor). - Fixed CHANGE PACKAGE/TECHNOLOGY in case a device contains more than 254 technologies (which was possible due to a missing check in the technology dialog of the device editor). - Fixed the technology dialog in the device editor, so that it doesn't accept more than 254 technologies per package variant. - Fixed a possible data corruption when a supply pin overwrites a net name. Leftover pin references that may have been caused by such a data corruption are automatically deleted during the next library update. - Fixed an unexpected "Cancel" button in some message boxes. - Fixed generating annulus symbols for pads that have the NOTHERMALS flag set. - Fixed faulty splitting of arcs near their end points. - Fixed a rounding error in handling rectangle coordinates and wire curves. - Fixed moving mirrored packages with polygons in a board (polygons were displayed in the wrong layer). - Fixed faulty "Change Class..." lines in the EXPORT NETLIST output from a schematic. - Fixed a problem with getting the program directory name under Windows XP if the console version of EAGLE was started without a full path name. - Fixed a possible crash when canceling the console version of EAGLE with Ctrl+C under Windows XP. - Fixed loading a text file on Windows XP from a non-Windows server (the file was not editable even though it was writable in the file system). - Fixed storing Undo data when doing a library update where the sequence of gates had changed in a device. If doing UNDO followed by REDO after such an update, some of the part's gates may have been swapped. Release notes for EAGLE 4.15 ============================ * Bugfixes: - The CHANGE PACKAGE command now updates the package in the board with the version from the schematic, in order to avoid problems in case a REPLACE has been done in the board while the schematic was closed. - Fixed handling access to the individual characters of a string in ULPs on Mac OS X. - The COPY command now updates the package in the board with the version from the schematic _before_ actually adding the copied part, in order to avoid problems in case a REPLACE has been done in the board while the schematic was closed. - The library update now reports a modification to the board even if it was just the renaming of some packages due to a previous REPLACE with the schematic closed. - Fixed handling empty strings in dlgListView. - Fixed clearing the selection of a dlgListView. - Fixed setting user defined default Design Rules when loading an existing library from within a project. - Fixed an extra line that appeared when closing a group with the right mouse button in case the group was empty. - Fixed a possible crash in UL_WIRE.pieces(). - Fixed cursor positioning after an error message regarding a loop member in a ULP. @ text @d3 1 a3 1 eagle/README d6 8 a13 1 eagle/bin/eagle.xpm d15 10 d27 1 d33 25 a57 2 eagle/doc/UPDATE eagle/doc/library.txt a59 329 eagle/help/1.htm eagle/help/10.htm eagle/help/100.htm eagle/help/101.htm eagle/help/102.htm eagle/help/103.htm eagle/help/104.htm eagle/help/105.htm eagle/help/106.htm eagle/help/107.htm eagle/help/108.htm eagle/help/109.htm eagle/help/11.htm eagle/help/110.htm eagle/help/111.htm eagle/help/112.htm eagle/help/113.htm eagle/help/114.htm eagle/help/115.htm eagle/help/116.htm eagle/help/117.htm eagle/help/118.htm eagle/help/119.htm eagle/help/12.htm eagle/help/120.htm eagle/help/121.htm eagle/help/122.htm eagle/help/123.htm eagle/help/124.htm eagle/help/125.htm eagle/help/126.htm eagle/help/127.htm eagle/help/128.htm eagle/help/129.htm eagle/help/13.htm eagle/help/130.htm eagle/help/131.htm eagle/help/132.htm eagle/help/133.htm eagle/help/134.htm eagle/help/135.htm eagle/help/136.htm eagle/help/137.htm eagle/help/138.htm eagle/help/139.htm eagle/help/14.htm eagle/help/140.htm eagle/help/141.htm eagle/help/142.htm eagle/help/143.htm eagle/help/144.htm eagle/help/145.htm eagle/help/146.htm eagle/help/147.htm eagle/help/148.htm eagle/help/149.htm eagle/help/15.htm eagle/help/150.htm eagle/help/151.htm eagle/help/152.htm eagle/help/153.htm eagle/help/154.htm eagle/help/155.htm eagle/help/156.htm eagle/help/157.htm eagle/help/158.htm eagle/help/159.htm eagle/help/16.htm eagle/help/160.htm eagle/help/161.htm eagle/help/162.htm eagle/help/163.htm eagle/help/164.htm eagle/help/165.htm eagle/help/166.htm eagle/help/167.htm eagle/help/168.htm eagle/help/169.htm eagle/help/17.htm eagle/help/170.htm eagle/help/171.htm eagle/help/172.htm eagle/help/173.htm eagle/help/174.htm eagle/help/175.htm eagle/help/176.htm eagle/help/177.htm eagle/help/178.htm eagle/help/179.htm eagle/help/18.htm eagle/help/180.htm eagle/help/181.htm eagle/help/182.htm eagle/help/183.htm eagle/help/184.htm eagle/help/185.htm eagle/help/186.htm eagle/help/187.htm eagle/help/188.htm eagle/help/189.htm eagle/help/19.htm eagle/help/190.htm eagle/help/191.htm eagle/help/192.htm eagle/help/193.htm eagle/help/194.htm eagle/help/195.htm eagle/help/196.htm eagle/help/197.htm eagle/help/198.htm eagle/help/199.htm eagle/help/2.htm eagle/help/20.htm eagle/help/200.htm eagle/help/201.htm eagle/help/202.htm eagle/help/203.htm eagle/help/204.htm eagle/help/205.htm eagle/help/206.htm eagle/help/207.htm eagle/help/208.htm eagle/help/209.htm eagle/help/21.htm eagle/help/210.htm eagle/help/211.htm eagle/help/212.htm eagle/help/213.htm eagle/help/214.htm eagle/help/215.htm eagle/help/216.htm eagle/help/217.htm eagle/help/218.htm eagle/help/219.htm eagle/help/22.htm eagle/help/220.htm eagle/help/221.htm eagle/help/222.htm eagle/help/223.htm eagle/help/224.htm eagle/help/225.htm eagle/help/226.htm eagle/help/227.htm eagle/help/228.htm eagle/help/229.htm eagle/help/23.htm eagle/help/230.htm eagle/help/231.htm eagle/help/232.htm eagle/help/233.htm eagle/help/234.htm eagle/help/235.htm eagle/help/236.htm eagle/help/237.htm eagle/help/238.htm eagle/help/239.htm eagle/help/24.htm eagle/help/240.htm eagle/help/241.htm eagle/help/242.htm eagle/help/243.htm eagle/help/244.htm eagle/help/245.htm eagle/help/246.htm eagle/help/247.htm eagle/help/248.htm eagle/help/249.htm eagle/help/25.htm eagle/help/250.htm eagle/help/251.htm eagle/help/252.htm eagle/help/253.htm eagle/help/254.htm eagle/help/255.htm eagle/help/256.htm eagle/help/257.htm eagle/help/258.htm eagle/help/259.htm eagle/help/26.htm eagle/help/260.htm eagle/help/261.htm eagle/help/262.htm eagle/help/263.htm eagle/help/264.htm eagle/help/265.htm eagle/help/266.htm eagle/help/267.htm eagle/help/268.htm eagle/help/269.htm eagle/help/27.htm eagle/help/270.htm eagle/help/271.htm eagle/help/272.htm eagle/help/273.htm eagle/help/274.htm eagle/help/275.htm eagle/help/276.htm eagle/help/277.htm eagle/help/278.htm eagle/help/279.htm eagle/help/28.htm eagle/help/280.htm eagle/help/281.htm eagle/help/282.htm eagle/help/283.htm eagle/help/284.htm eagle/help/285.htm eagle/help/286.htm eagle/help/287.htm eagle/help/288.htm eagle/help/289.htm eagle/help/29.htm eagle/help/290.htm eagle/help/291.htm eagle/help/292.htm eagle/help/293.htm eagle/help/294.htm eagle/help/295.htm eagle/help/296.htm eagle/help/297.htm eagle/help/298.htm eagle/help/299.htm eagle/help/3.htm eagle/help/30.htm eagle/help/300.htm eagle/help/301.htm eagle/help/302.htm eagle/help/303.htm eagle/help/304.htm eagle/help/305.htm eagle/help/306.htm eagle/help/307.htm eagle/help/308.htm eagle/help/309.htm eagle/help/31.htm eagle/help/310.htm eagle/help/311.htm eagle/help/312.htm eagle/help/313.htm eagle/help/314.htm eagle/help/315.htm eagle/help/316.htm eagle/help/317.htm eagle/help/318.htm eagle/help/319.htm eagle/help/32.htm eagle/help/320.htm eagle/help/321.htm eagle/help/322.htm eagle/help/323.htm eagle/help/324.htm eagle/help/325.htm eagle/help/326.htm eagle/help/327.htm eagle/help/33.htm eagle/help/34.htm eagle/help/35.htm eagle/help/36.htm eagle/help/37.htm eagle/help/38.htm eagle/help/39.htm eagle/help/4.htm eagle/help/40.htm eagle/help/41.htm eagle/help/42.htm eagle/help/43.htm eagle/help/44.htm eagle/help/45.htm eagle/help/46.htm eagle/help/47.htm eagle/help/48.htm eagle/help/49.htm eagle/help/5.htm eagle/help/50.htm eagle/help/51.htm eagle/help/52.htm eagle/help/53.htm eagle/help/54.htm eagle/help/55.htm eagle/help/56.htm eagle/help/57.htm eagle/help/58.htm eagle/help/59.htm eagle/help/6.htm eagle/help/60.htm eagle/help/61.htm eagle/help/62.htm eagle/help/63.htm eagle/help/64.htm eagle/help/65.htm eagle/help/66.htm eagle/help/67.htm eagle/help/68.htm eagle/help/69.htm eagle/help/7.htm eagle/help/70.htm eagle/help/71.htm eagle/help/72.htm eagle/help/73.htm eagle/help/74.htm eagle/help/75.htm eagle/help/76.htm eagle/help/77.htm eagle/help/78.htm eagle/help/79.htm eagle/help/8.htm eagle/help/80.htm eagle/help/81.htm eagle/help/82.htm eagle/help/83.htm eagle/help/84.htm eagle/help/85.htm eagle/help/86.htm eagle/help/87.htm eagle/help/88.htm eagle/help/89.htm eagle/help/9.htm eagle/help/90.htm eagle/help/91.htm eagle/help/92.htm eagle/help/93.htm eagle/help/94.htm eagle/help/95.htm eagle/help/96.htm eagle/help/97.htm eagle/help/98.htm eagle/help/99.htm eagle/help/index.htm eagle/install d67 2 d71 1 d73 2 d76 4 d83 1 d86 1 d90 1 d93 1 d101 1 d103 1 d107 1 d109 1 d112 1 d114 1 d120 1 d124 2 d128 1 d130 1 d138 1 d140 3 d147 1 d156 2 d160 1 d162 1 d165 1 d168 1 d170 2 d173 1 d175 2 d183 2 d187 1 d189 1 d191 1 d193 1 d195 1 d197 2 d200 22 d229 1 d234 1 d236 2 d240 1 d244 1 d248 2 d252 1 d255 1 d257 4 d262 1 d265 2 d268 2 d273 1 d276 1 d282 3 d288 1 d293 1 d297 1 d299 1 d301 3 d306 2 d311 4 d324 2 d335 1 a335 2 eagle/lbr/quantum-sensor.lbr eagle/lbr/rahmen.lbr d337 1 d339 1 d342 1 d350 1 d352 3 d356 1 d358 2 d361 2 d365 1 d367 2 a368 1 eagle/lbr/special-pad.lbr d371 2 a372 1 eagle/lbr/supply-dummy.lbr d375 2 d380 2 d387 1 d390 3 d396 1 d398 1 d405 1 d407 1 d414 5 a418 1 eagle/lbr/wuerth-elektronik.lbr a420 1 eagle/man/eagle.1 d423 6 d433 3 d442 4 d456 3 d460 1 a460 1 eagle/scr/eagleassign.scr d463 1 d468 1 d476 1 d480 3 d487 1 d521 1 d566 3 d576 3 a581 1 eagle/ulp/drill-legend.ulp d583 1 d585 6 d592 1 d610 1 a610 1 eagle/ulp/exp-project-lbr.ulp d613 2 d617 1 d619 3 d625 1 a625 10 eagle/ulp/import-bmp-c16.bmp eagle/ulp/import-bmp-c2.bmp eagle/ulp/import-bmp-c256-0.bmp eagle/ulp/import-bmp-c256-1.bmp eagle/ulp/import-bmp-c256-2.bmp eagle/ulp/import-bmp-c256-3.bmp eagle/ulp/import-bmp-c256-4.bmp eagle/ulp/import-bmp-c256-5.bmp eagle/ulp/import-bmp-c256-6.bmp eagle/ulp/import-bmp-c256-7.bmp d631 2 d634 4 d640 4 d645 1 d649 5 a653 1 eagle/ulp/make_package_meass_padinfo.bmp d660 2 d665 10 d677 1 d679 1 d683 1 d686 4 d692 2 d695 1 d698 1 d702 1 d704 2 d707 1 d712 1 d714 5 d722 2 d726 1 d730 1 d733 4 d738 3 a740 1 eagle/ulp/renumber-sch.ulp d742 1 d745 6 d752 2 d759 5 d766 1 d768 1 d770 2 a772 1 eagle/ulp/unidat-fiducials.ulp d776 1 @ 1.6 log @Remove @@dirrm entries from PLISTs @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.5 2005/05/30 19:48:54 bouyer Exp $ d358 1 d362 1 d366 1 a379 1 eagle/lbr/con-amp-mt6.lbr d388 2 d393 1 d399 1 d401 1 d403 1 d409 2 d417 2 d421 1 d441 2 d448 2 d459 1 d461 1 d467 1 d470 1 d480 1 d485 1 d489 1 d492 2 d513 2 d529 1 d536 1 d544 1 d614 69 d692 1 d705 1 d730 1 d750 6 d760 2 d786 1 d798 1 d801 1 a816 1 @@unexec ${RM} -f %D/eagle/bin/eagle.key @ 1.5 log @Update to 4.14. OK'd by Rene Hexel. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.4 2004/02/25 01:09:25 xtraeme Exp $ a703 15 @@dirrm eagle/ulp @@dirrm eagle/scr @@dirrm eagle/projects/examples/tutorial @@dirrm eagle/projects/examples/singlesided @@dirrm eagle/projects/examples/hexapod @@dirrm eagle/projects/examples @@dirrm eagle/projects @@dirrm eagle/man @@dirrm eagle/lbr @@dirrm eagle/help @@dirrm eagle/dru @@dirrm eagle/doc @@dirrm eagle/cam @@dirrm eagle/bin @@dirrm eagle @ 1.4 log @Update cad/eagle to 4.11, from Ossi Herrala in PR pkg/24552. Changes: Library Management * Packages and Device Sets can now be copied into the currently edited library from other libraries, either through Drag&Drop from the Control Panel or by using the COPY command's new extended syntax (see "Help Copy"). * New package variants can now be created by directly using packages from other libraries, either through Drag&Drop from the Control Panel or by using the PACKAGE command's new extended syntax. * The packages of the currently edited library can now be updated with those from other libraries, either through Drag&Drop from the Control Panel or by using the UPDATE command's new extended syntax. And more! please review this link to see a full list of changes: http://www.cadsoft.de/version41.htm @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.3 2002/09/13 21:35:18 rh Exp $ d271 2 a398 1 eagle/lbr/con-ml.lbr d409 1 a422 1 eagle/lbr/discrete.lbr d426 1 d440 1 d489 1 d519 1 d535 1 a567 1 eagle/scr/write.scr d571 1 a577 1 eagle/ulp/change-pad-in-lbr.scr d580 1 d592 1 d600 1 d621 1 d623 2 d645 6 d692 5 a696 1 eagle/ulp/snap-pin-in-smbol.ulp d698 1 a702 1 eagle/uninstall @ 1.3 log @Update eagle to 4.09r2. Changes include some device additions to the library and minor bugfixes. Update provided by . This closes PR pkg/18279. @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.2 2002/02/15 10:12:30 skrll Exp $ d360 1 d362 1 d367 2 d373 1 d375 1 d382 1 d397 1 d414 1 a419 1 eagle/lbr/dil.lbr d429 1 d449 1 d463 1 d472 1 d479 1 d500 1 d513 1 d521 1 d523 1 a541 1 eagle/projects/examples/singlesided/singlesided.dru d562 1 d572 1 d574 1 d577 1 d585 1 d613 1 d635 1 d637 1 d643 2 d646 1 d648 1 d653 1 d669 2 a670 7 eagle/ulp/rotate-angle.bmp eagle/ulp/rotate-cream.bmp eagle/ulp/rotate-dev-pac-in-lbr.ulp eagle/ulp/rotate-mask.bmp eagle/ulp/rotate-start-angle.bmp eagle/ulp/rotate-step-angle.bmp eagle/ulp/rotate.ulp d675 1 d678 1 @ 1.2 log @mkdir -> ${MKDIR} rmdir -> ${RMDIR} rm -> ${RM} (${RM} added to PLIST_SUBST) chmod -> ${CHMOD} chown -> ${CHOWN} @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.1 2001/11/01 00:47:49 zuntum Exp $ d13 2 d391 1 d409 1 d413 1 d429 1 a439 1 eagle/lbr/memory-motorola-dram.lbr d548 17 a564 7 eagle/ulp/cmd_change_swap_layer.ulp eagle/ulp/cmd_rename-in-lbr.ulp eagle/ulp/cmd_renumber.ulp eagle/ulp/cmd_showzoom.ulp eagle/ulp/cmd_snap_board.ulp eagle/ulp/cmd_snap_schematic.ulp eagle/ulp/cmd_snappads.ulp d566 5 a570 3 eagle/ulp/del_devices.ulp eagle/ulp/del_empty_devices.ulp eagle/ulp/del_pack_sym.ulp d575 56 a630 33 eagle/ulp/editnext_dev-sym-pac.ulp eagle/ulp/editprev_dev-sym-pac.ulp eagle/ulp/ex_argv_path.ulp eagle/ulp/ex_dialogs.ulp eagle/ulp/ex_dlglist.ulp eagle/ulp/ex_file_copy.ulp eagle/ulp/ex_include.ulp eagle/ulp/ex_input-file.ulp eagle/ulp/ex_loop_lbrs.ulp eagle/ulp/ex_run_script.ulp eagle/ulp/exp_project_lbr.ulp eagle/ulp/exportdesc_htm.ulp eagle/ulp/exportdescript.ulp eagle/ulp/gluemark4.ulp eagle/ulp/glueout4.ulp eagle/ulp/import_bmp.ulp eagle/ulp/import_c16.bmp eagle/ulp/import_c2.bmp eagle/ulp/import_c256-0.bmp eagle/ulp/import_c256-1.bmp eagle/ulp/import_c256-2.bmp eagle/ulp/import_c256-3.bmp eagle/ulp/import_c256-4.bmp eagle/ulp/import_c256-5.bmp eagle/ulp/import_c256-6.bmp eagle/ulp/import_c256-7.bmp eagle/ulp/import_c256.bmp eagle/ulp/import_dpi.bmp eagle/ulp/import_ratio.bmp eagle/ulp/import_ratiom.bmp eagle/ulp/import_scale.bmp eagle/ulp/mount4.ulp eagle/ulp/mountsmd4.ulp a631 1 eagle/ulp/nextdevice.ulp a632 1 eagle/ulp/nextsym.ulp d634 2 a635 2 eagle/ulp/panelize4.ulp eagle/ulp/part2htm4.ulp a636 2 eagle/ulp/prevdevice.ulp eagle/ulp/prevpac.ulp d638 17 a654 4 eagle/ulp/psdraw4.ulp eagle/ulp/remove_dev-sym-pac.ulp eagle/ulp/rename-in-lbr.ulp eagle/ulp/useful_routines.ulp a655 1 eagle/userinstall @ 1.1 log @Move pkg/ files into package's toplevel directory @ text @d1 1 a1 1 @@comment $NetBSD: PLIST,v 1.3 2001/06/05 16:49:09 dillo Exp $ d608 1 a608 1 @@unexec rm -f %D/eagle/bin/eagle.key @